Issue 78

M. Bronovets et alii, Frattura ed Integrità Strutturale, 78 (2026) 367-377; DOI: 10.3221/IGF-ESIS.78.21

[10] Gachegova, E., Davydov, D., Mironov, S., Kalinenko, A., Ozerov, M., Zherebtsov, S., Plekhov, O. (2024). The Influence of Absorbing Coating Material on the Efficiency of Laser Shock Peening, Metals, 14(9), pp. 1045. DOI: http://dx.doi.org/10.3390/met14091045. [11] Verezhak, V., Vshivkov, A., Gachegova, E. , Bartolomei, M., Mayer, A., Swaroop, S. (2024). Application of deep learning for technological parameter optimization of laser shock peening of Ti-6Al-4V alloy, Fracture and Structural Integrity, 18(70), pp. 121-132. DOI: http://dx.doi.org/10.3221/IGF-ESIS.70.07. [12] Lu, G., Liu, H., Lin, C., Zhang, Z., Shukla, P, Zhang, Y., Yao, J. (2019). Improving the fretting performance of aero engine tenon joint materials using surface strengthening, Mater. Sci. Technologies, 35(15), pp. 1781–1788. DOI: http://dx.doi.org/10.1080/02670836.2019.1650445. [13] Luo, X., Xu, Z., Tian, K., Wang, Y., Wang, X., Wang, K., Yu, Y., Ye, C., Dang, N. (2025). Effect of overlap pattern on the residual stress, surface morphology and fatigue properties of Ti-6Al-4V alloy by multiple laser shock peening, Opt. Laser Technol., 180, pp. 111486. DOI: http://dx.doi.org/10.1016/j.optlastec.2024.111486. [14] Han, H., Qiao, H., Zhao, J., Lu, Y., Sun, B. (2025). Research progress of laser shock peening with nanosecond and femtosecond lasers: applications, challenges, and future directions, Opt. Laser Technologies, 192 (A), pp. 113507. DOI: http://dx.doi.org/10.1016/j.optlastec.2025.113507. [15] Arulvel, S., Rufuss, D.D.W., Akshat, J., Kandasamy, J., Singhal, M. (2023). Laser processing techniques for surface property enhancement: focus on material advancement, Surf. Interfaces, 42(A), pp. 103293. DOI: http://dx.doi.org/10.1016/j.surfin.2023.103293. [16] Clauer, A., Lahrman, D. (2001). Laser Shock Processing as a Surface Enhancement Process, Key Engineering Materials, 197, pp. 121-144. DOI: http://dx.doi.org/10.4028/www.scientific.net/KEM.197.121. [17] Dhakal, B., Swaroop, S. (2018). Review: Laser shock peening as post welding treatment technique, Journal of Manufacturing Processes, 32, pp. 721-733. DOI: http://dx.doi.org/10.1016/j.jmapro.2018.04.006. [18] Praveenkumar, K., Swaroop, S., Manivasagam, G. (2023). Effect of multiple laser shock peening without coating on residual stress distribution and high temperature dry sliding wear behaviour of Ti-6Al-4V alloy, Opt. Laser Technol., 164, pp. 109398. DOI: http://dx.doi.org/10.1016/j.optlastec.2023.109398. [19] Lu, J.Z., Luo, K.Y., Zhang, Y.K., et al. (2010). Grain refinement mechanism of multiple laser shock processing impacts on ANSI 304 stainless steel, Acta Mater., 58, pp. 5354-5362. DOI: http://dx.doi.org/10.1016/j.actamat.2010.06.010. [20] Dhakal, B., Swaroop, S. (2022). Mechanical properties and deformation dependent microstructural aspects of laser shock peened 7075-T6 aluminum alloy without coating, Mater. Charact., 183 (2022), pp. 111620. DOI: http://dx.doi.org/10.1016/j.matchar.2021.111620. [21] He, T., Gong, Z., Liu, Z., et al. (2024). Effect of laser shock peening impact numbers on microstructure and tribological characteristics of GCr15 steel, J. Mater. Eng. Perform., 34, pp. 10891-10905. DOI: http://dx.doi.org/10.1007/s11665-024-10008-5. [22] Yang, F., Zhao, T., He, P., et al. (2024). Effect of pulsed femtosecond laser shock peening surface modification on anti-wear failure properties of AISI 9310 gear steel, Eng. Fail. Anal., 159, pp. 108146. DOI: http://dx.doi.org/10.1016/j.engfailanal.2024.108146. [23] Strubbia, R., Jimenez, C.A.V., Rosas, G.G., et al. (2023). Tribological behaviour of duplex stainless steel with laser peening treatments without coating, J. Mater. Eng. Perform., 34 (04), pp. 266-278. DOI: http://dx.doi.org/10.1007/s11665-023-09064-0. [24] Zhu, D., He, X., Zhong, L., Wang, G., Wei, G., Pang, G., Liao, W. (2025). Effect of laser shock peening on tribological properties of 55SiMoVA bearing steel, Optics & Laser Technology, 181 (A), pp. 111704. DOI: http://dx.doi.org/10.1016/j.optlastec.2024.111704. [25] Cao, Z., Cui, L., Luo, S., Song, J., Su, H., Pang, Z., Zhao, W., He, W., Liang, X. (2025). Insights into room- and elevated-temperature micro-mechanisms of laser shock peened M50 steel with superior tribological performance, Journal of Materials Science & Technology, 205, pp. 270-285. DOI: http://dx.doi.org/10.1016/j.jmst.2024.04.039. [26] Goryacheva, I.G., Yakovenko, A.A., Gachegova, E.A., Panteleev, I.A. (2025). Modeling the Residual Stress Effect on Contact Fatigue Fracture of Elastic Solids under Sliding/Rolling Friction, Physical Mesomechanics, 28 (6), pp. 776 791. DOI: http://dx.doi.org/10.1134/S1029959925600338. [27] Archard J. F., Hirst W. (1956). The wear of metals under unlubricated conditions, Proceedings of the Royal Society of London. Series A, Mathematical and Physical Sciences, 236 (1206), pp. 397-410.

377