| Cover | 1 |
| TOC | 3 |
| Editorial Team | 7 |
| Sister Associations | 11 |
| Editorial | 13 |
| Experimental and numerical investigation of residual stresses in dissimilar butt-weld joint made of cast iron and mild steel - A. Bacco, A. Califano, A. Greco, R. Sepe | 14 |
| Z. A. Betti, N. Betti - Heat treatment of steel using Carboxymethyl Cellulose (CMC) as a green quenching medium: effect of concentration on microstructure evolution and wear resistance | 32 |
| K. Dileep, A. Srinath, N.R. Banapurmath, M. A. Umarfarooq, A. M. Sajjan - Mechanical and fracture response of epoxy nanocomposites reinforced with low concentration graphene and graphene–SiO₂ hybrids | 44 |
| F. Veschi, F. Foiani, M. Palmieri, G. Morettini, F. Cianetti - Fatigue damage assessment for Sine-on-Random: a comparative analysis of the predictive capability and application limits of spectral methods | 57 |
| N. Naboulsi, F. Ait Hmazi, F. Majid, F. Z. Karmil, N. Douiri, T. Hachimi - Effect of layer orientation and infill density on reliability and lifetime of FDM-printed conductive composites under tensile loading | 87 |
| V. Pisarev, S. Eleonsky, A. Chernov, Y. Matvienko - Influence of impact energy on residual stresses values inherent in damaged area of composite plate | 109 |
| C. Popa, L. Marsavina, C. Marsavina, C. Popa - Optimal shape determination of shear specimens using Machine Learning | 131 |
| N. Mohan, V. Bharathi, S. Harish, N. Santhosh, V. B. Hemadri, B. M. Ningegowda - Comparative study on dry wear and tribocorrosion behavior of boronized martensitic stainless steels | 142 |
| C. S. Karadumpa, M. Perumalla - Development and performance evaluation of hybrid nano modified SCM-based concretes | 159 |
| Manar Adel, Seleem S. E. Ahmad, Ahmed A. Elakhras - Investigating the effects of steel fibers and notch depth on the fracture behavior of reinforced concrete (RC) beams using both matrix-cracked and through-thickness cracked approaches | 181 |
| A. Sancak, A. Candaş, S. Kurt, C. E. İmrak - Effects of seawater corrosion, notch timing, and test temperature on the impact toughness of AISI 1008 marine chain steel | 199 |
| D.S. Lobanov, E.A. Chebotareva, K.I. Churin - The effect of external service-induced defects on the mechanical properties of fibreglass-reinforced plastic under compression | 220 |
| V. I. Kolesnikov, O. A. Belyak, D. S. Bulgarevich, O. V. Kudryakov, S. V. Panin - Crystal plasticity modeling of perfectly bonded layered composites under combined normal/shear loading | 233 |
| G. Palomba, D. D’Andrea, G. Risitano, P. Corigliano, D. D’Andrea - Experimental and numerical modelling of AISI 316L Butt-welded joints under tensile stress using local material properties | 246 |
| A. P. Soldatenkov, A. A. Shanyavskiy, E. V. Naydenkin, I P. Mishin, S. V. Panin, A. A. Bogdanov - Effect of aging temperature on mechanical and fatigue properties of Ti-5Al-5V-5Mo-1Cr-1Fe alloy processed by radial-shear rolling | 261 |
| A. Zakharov, V. Shlyannikov - Loading biaxiality and crack tip curvature effects on plastic stress intensity factor behaviour at small-scale and extensive plasticity | 273 |
| T. Nasri, A. Hamdi, M. A. Borgi - Microstructure-explicit Chebyshev-enriched Paris law for short fatigue crack propagation in rolled AA2024-T351 | 288 |
| S. A. A. Mustafa, O. Shallah, M.A. Khafaga, M. Mashaal - Experimental evaluation of the cyclic behavior of implanted reinforced concrete shear walls | 311 |
| Digesh D. Joshi, Paresh V. Patel, Rinkesh V. Makawana - Strengthening techniques for progressive collapse mitigation in RC and precast structures: a selective review and the potential of stainless-steel wire mesh | 328 |
| S. M. Khalil, A. A. Matloub, M. M. Fawzy, A. H. Yousef - Numerical investigation on web of steel I-beam with closed top flange under patch loading | 359 |
| M. Bronovets, P. Bukovskiy, I. Goryacheva, A. Vshivkov, E. Gachegova, A. Iziumova, R. Sabirov, O. Plekhov - Increasing the wear resistance of rolling bearings by laser shock peening | 380 |
| N. Nayak, H. N. Reddappa, N. C. Reddy, M. Ravikumar - Study on multi-response optimization of mechanical, dielectric properties and fracture surface of alkali-treated sisal fibre reinforced polypropylene composites | 391 |
| M. Słowik, A. Akram - The combined effect of cement matrix strength and aggregate type on the tensile behaviour of concrete | 406 |
| M. Habashneh, M. M. Rad - Influence of mesh size, evolutionary rate, and filter radius on geometrically nonlinear topology optimization | 422 |
| S. Vantadori, F. Iacoviello, C. Bellini, V. Di Cocco, C. Ronchei, D. Scorza, A. Zanichelli, R. Fiorillo - Fatigue damage evolution in ZrO2-reinforced Al7075 metal matrix composites: from S-N curves to Paris multilinear regimes | 445 |
| R. Shivashankar, R. Kiran, D. C. Savitha, V. Ravikumar, P. B. Asha, A. Anand, B. Suresha - Synergistic effect of Silicon Nitride nanoparticles and Hemp/Basalt hybrid reinforcement on mechanical integrity and fracture resistance of epoxy composites | 467 |
| A. A. Frantsuzov, A. Dong, K. S. Korobov, E. S. Statnik, A. I. Salimon, A. M. Korsunsky - Comparative analysis of prior austenite grain size (PAGS) determination in high grade pipeline steels | 487 |
| A. Gallo, E. Armentani, M. Ferraiuolo, M. Perrella - A second-order relaxed Newton framework for material parameters identification and stress-constrained structural optimization | 502 |
| S. Majer, B. Budziński, P. Lehner, G. Szmechel - Design of pavements under extreme loads in challenging subsoil conditions in port areas – Case study of Szczecin and Świnoujście | 519 |
| C. Vendittozzi, A. Brindisi, A. Concilio, S. Ameduri, E. di Micco, F. Berto, S. Natali, D. Tittoni - Field FBG monitoring of helicopter landing gear: data integrity screening and time–frequency characterization of operational events | 534 |