PSI - Issue 35

Domen Šeruga et al. / Procedia Structural Integrity 35 (2022) 150–158 Sˇ eruga et al. / Structural Integrity Procedia 00 (2021) 000–000

158

9

International Journal of Material Forming 12, 907–926. Besseling, J., 1958. A theory of elastic, plastic and creep deformations of an initially isotropic material. Journal of Applied Mechanics 25, 529–536. Co ffi n, L.F., 1954. A study of cyclic-thermal stresses in a ductile metal. Trans ASME 76, 931–950. Li, J., Zhou, C.Y., Zhu, J.G., 2020. Limit loads for 180 ◦ pipe bends under in-plane bending moment considering geometric nonlinearity. Interna tional Journal of Pressure Vessels and Piping 183, 104100. Lu, H., Vaz, M.A., Caire, M., 2020. A finite element model for unbonded flexible pipe under combined axisymmetric and bending loads. Marine Structures 74, 102826. Manson, S.S., 1952. Behavior of material under conditions of thermal stress. Technical Report. University of Michigan. Nagode, M., Hack, M., Fajdiga, M., 2010. Low cycle thermo-mechanical fatigue: damage operator approach. Fatigue Fract Engng Matr Struct 33, 149–160. Nagode, M., Klemenc, J., Oman, S., Sˇ eruga, D., 2021. A closed-form solution for temperature-dependent elastoplastic problems using the Prandtl operator approach. Communications in Nonlinear Science and Numerical Simulation 99, 105839. Nagode, M., Sˇ eruga, D., Hack, M., Hansenne, E., 2012. Damage operator-based lifetime calculation under thermomechanical fatigue and creep for application on uginox f12t en 1.4512 exhaust downpipes. Strain 48, 198–207. Ramberg, W., Osgood, W.R., 1943. Description of stress-strain curves by three parameters. Technical Report. NACA-TN-902. Roy, P., Kumar, M., Khan, K., 2021. Plastic analysis of initially deformed thin-walled pressurized 30 ◦ to 180 ◦ pipe bends under in-plane opening bending moment. International Journal of Pressure Vessels and Piping 192, 104415. Shim, D.S., Kim, K.P., Lee, K.Y., 2016. Double-stage forming using critical pre-bending radius in roll bending of pipe with rectangular cross section. Journal of Materials Processing Technology 236, 189–203. Sˇ eruga, D., Hansenne, E., Haesen, V., Nagode, M., 2014. Durability prediction of en 1.4512 exhaust mu ffl ers under thermomechanical loading. International Journal of Mechanical Sciences 84, 199 – 207. Yazdekhasti, S., Piratla, K.R., Atamturktur, S., Khan, A.A., 2017. Novel vibration-based technique for detecting water pipeline leakage. Structure and Infrastructure Engineering 13, 731–742. Yoon, K.B., Byun, C.H., Nguyen, T.S., Yu, J.M., Jeon, G.M., 2017. Cracking of 5cr steel tee-pipe during start-up operation in heavy oil upgrade refinery. Engineering Failure Analysis 81, 204–215. Yu, Y., Safari, A., Niu, X., Drinkwater, B., Horoshenkov, K.V., 2021. Acoustic and ultrasonic techniques for defect detection and condition monitoring in water and sewerage pipes: A review. Applied Acoustics 183, 108282.