PSI - Issue 35

8

Domen Šeruga et al. / Procedia Structural Integrity 35 (2022) 150–158 Sˇ eruga et al. / Structural Integrity Procedia 00 (2021) 000–000

157

Fig. 9. The displacement field of the pipe bend in a) direction x at step 1, b) direction x at step 2, c) direction x at step 3, d) direction y at step 1, e) direction y at step 2, f) direction y at step 3, g) direction z at step 1, h) direction z at step 2 and i) direction z at step 3. The displacement field is magnified by a factor of 25.

matic hardening of the material and temperature-dependent material properties. The results of the simulation can be used in complementary R&D evaluations, e.g. functionality, durability or reliability.

Acknowledgements

The authors acknowledge financial support from the Slovenian Research Agency (research core funding No. P2 0182 entitled Development Evaluation).

References

Ancellotti, S., Fontanari, V., Slaghenaufi, S., Cortelletti, E., Benedetti, M., 2019. Forming rectangular tubes into complicated 3D shapes by combining three-roll push bending, twisting and rotary draw bending: the role of the fabrication loading history on the mechanical response.