PSI - Issue 39

Riccardo Caivano et al. / Procedia Structural Integrity 39 (2022) 81–88 Author name / Structural Integrity Procedia 00 (2019) 000–000

88

8

[27] Lee JW, Yoon GH, Jeong SH. Topology optimization considering fatigue life in the frequency domain. Comput Math with Appl 2015;70:1852–77. https://doi.org/10.1016/j.camwa.2015.08.006. [28] Tridello A, Fiocchi J, Biffi CA, Chiandussi G, Rossetto M, Tuissi A, et al. Effect of microstructure, residual stresses and building orientation on the fatigue response up to 109 cycles of an SLM AlSi10Mg alloy. Int J Fatigue 2020;137:105659. https://doi.org/10.1016/j.ijfatigue.2020.105659. [29] Leuders S, Lieneke T, Lammers S, Tröster T, Niendorf T. On the fatigue properties of metals manufactured by selective laser melting - The role of ductility. J Mater Res 2014;29:1911–9. https://doi.org/10.1557/jmr.2014.157. [30] Beretta S, Romano S. A comparison of fatigue strength sensitivity to defects for materials manufactured by AM or traditional processes. Int J Fatigue 2017;94:178–91. https://doi.org/10.1016/j.ijfatigue.2016.06.020. [31] Romano S, Brückner-Foit A, Brandão A, Gumpinger J, Ghidini T, Beretta S. Fatigue properties of AlSi10Mg obtained by additive manufacturing: Defect-based modelling and prediction of fatigue strength. Eng Fract Mech 2018;187:165–89. https://doi.org/10.1016/j.engfracmech.2017.11.002. [32] Yukitaka Murakami. Metal Fatigue: Effects of Small Defects adn Nonmetallic Inclusions. Elsevier; 2002. https://doi.org/10.1016/B978-0-08-044064-4.X5000-2. [33] Gao X, Caivano R, Tridello A, Chiandussi G, Ma H, Paolino D, et al. Innovative formulation for topological fatigue optimisation based on material defects distribution and TopFat algorithm. Int J Fatigue 2021;147:106176. https://doi.org/10.1016/j.ijfatigue.2021.106176. [34] Suresh S. Fatigue of Materials. Cambridge University Press; 1998. https://doi.org/10.1017/CBO9780511806575. [35] Arcam EBM system. Ti6AL4V ELI Titanium alloy n.d. www.arcam.com. [36] Günther J, Krewerth D, Lippmann T, Leuders S, Tröster T, Weidner A, et al. Fatigue life of additively manufactured Ti–6Al–4V in the very high cycle fatigue regime. Int J Fatigue 2017;94:236–45. https://doi.org/10.1016/j.ijfatigue.2016.05.018. [37] Niu MC-Y. AIRFRAME: Stress Analysis and Sizing. Hong Kong Conmilit Press ltd.; 1997.