PSI - Issue 72

Toeri Fathuddin Yusuf et al. / Procedia Structural Integrity 72 (2025) 436–444

444

Prabowo, A.R., Bae, D.M., Sohn, J.M., Cao, B., 2016a. Energy behavior on side structure in event of ship collision subjected to external parameters. Heliyon 2(11), e00192 Prabowo, A.R., Bae, D.M., Sohn, J.M., Zakki, A.F., 2016b. Evaluating the parameter influence in the event of a ship collision based on the finite element method approach. International Journal of Technology 7(4), 592–602 Pratama, A.A., Prabowo, A.R., Muttaqie, T., Muhayat, N., Ridwan, R., Cao, B., Laksono, F.B., 2023. Hollow tube structures subjected to compressive loading: implementation of the pitting corrosion effect in nonlinear FE analysis. Journal of the Brazilian Society of Mechanical Sciences and Engineering 45(3), 143 Radojković, M., Čamagić, I., Šarkočević, Ž., Živković, P., Golubović, Z., 2021. Stress distribution on an isotropic plate wit h a rectangular opening under biaxial tension load. Structural Integrity and Life 21(1), 91-94 Rahman, R.A., Prabowo, A.R., Ehlers, S., Braun, M., Yaningsih, I., Muhayat, N., Tjahjana, D.D.D.P., Adiputra, R., 2024b. Analysis of the ballistic impact on sandwich panel: influence of attack angle and target location in structure–bullet interaction. Journal of the Brazilian Society of Mechanical Sciences and Engineering 46(10), 598 Rahman, R.A., Suryanto, S., Prabowo, A.R., Yaningsih, I., Ehlers, S., Braun, M., 2024a. Assessment of ship collision risk based on the recorded accident cases: Structural damage and environmental recovery. E3S Web of Conferences 563, 03087 Recht, R.F., Ipson, T.W., 1963. Ballistic perforation dynamics. Journal of Applied Mechanics 30, 384-390 Ridwan, R., Sudarno, S., Nubli, H, Chasan, A., Istanto, I., Pratama, P.S., 2023. Numerical Analysis of Openings in Stiffeners under Impact Loading: Investigating Structural Response and Failure Behavior. Mekanika: Majalah Ilmiah Mekanika 22(2), 115-125 Rosenberg, Z., Dekel, E., 2009. On the deep penetration and plate perforation by rigid projectiles. International Journal of Solids and Structures 46, 4169-4180 Rosenberg, Z., Dekel, E., 2009. The penetration of rigid long rods – revisited. International Journal of Impact Engineering 36, 551-564 Rosenberg, Z., Dekel, E., 2010. Revisiting the perforation of ductile plates by sharp-nosed rigid projectiles. International Journal of Solids and Structures 47, 3022-3033 Spear, D., Palazotto, A., Kemnitz, R., 2021. Modeling and Simulation Techniques Used in High Strain Rate Projectile Impact. Mathematics 9(3), 274 Saputra, R.K., Suryanto, S., Prabowo, A.R., Tjahjana, D.D.D.P., Jurkovič, M., Baek, S.J., Istanto, I., Muttaqie, T., 2024. Ef forts and regulation developments of maritime environmental recovery based on ship accident and oil spill. E3S Web of Conferences 563, 03086 Schulze, V., Zanger, F., 2011. Numerical Analysis of the Influence of Johnson-Cook-Material Parameters on the Surface Integrity of Ti-6Al-4 V. Procedia Engineering 19, 306-311 Sun, D., Jiang, J., Zhang, M., Wang, Z., 2016. Ballistic experiments on the mechanism of protective layer against domino effect caused by projectiles. Journal of Loss Prevention in the Process Industries 40, 17-28 Suryanto, S., Prabowo, A.R., Adiputra, R., Ehlers, S., Braun, M., Yaningsih, I., Tjahjana, D.D.D.P., Muhayat, N., Budiana, E.P., 2024. Environmental impacts caused by fire and explosion accidents in maritime activities: A review. E3S Web of Conferences 563, 02035 Suryanto, S., Prabowo, A.R., Muttaqie, T., Istanto, I., Adiputra, R., Muhayat, N., Fajri, A., Ehlers, S., Braun, M., Yaningsih, I., Tjahjana, D.D.D.P., Muhayat, N., Budiana, E.P., 2024. Evaluation of high-tensile steel using nonlinear analysis: Experiment- FE materials benchmarking of LNG carrier structures under low-temperature conditions. Energy Reports 9, 149-161 Thomson, W.T., 1955. An approximate theory of armor penetration. Journal of Applied Physics 26(1), 80-82 Valoppi, B., Bruschi, S., Ghiotti, A., Shivpuri, 2017. Johnson -Cook based criterion incorporating stress triaxiality and deviatoric effect for predicting elevated temperature ductility of titanium alloy sheets. International Journal of Mechanical Sciences 123, 94-105 Wang, X., Shi, J., 2013. Validation of Johnson-Cook plasticity and damage model using impact experiment. International Journal of Impact Engineering 60, 67-75 Wiranto, I.B., Saraswati, S.O., Alfikri, I.R., Chairunnisa, C., Megawanto, F.C., Adhynugraha, Majid, N.C., 2024. Effect of Boundary Condition on Numerical Study of UAV Composite Skin Panels Under Dynamic Impact Loading. Mekanika: Majalah Ilmiah Mekanika 23(1), 22-32 Woodward, R.L., 1978. The penetration of metal targets by conical projectiles. International Journal of Mechanical Sciences 20(6), 349-359 Yunfei, D., Yong, Z., Xianzhi, Z., Yonggang, Y., 2020. Dynamic Mechanical Properties and Modification of Fracture Criteria of 6061-T651 Aluminum Alloy. Journal of Mechanical Engineering 56(18), 81-91