PSI - Issue 72

Muh. Linggar Adi Wardhana et al. / Procedia Structural Integrity 72 (2025) 418–426

425

modifications that are durable to seawater environmental conditions, have good mechanical properties, and are environmentally friendly by reducing the use of materials that can pollute the seawater environment. References Ahzhan, M.F.A., Muttaqie, T., Prabowo, A.R., Fajri, A., Suryanto, S., Do, Q.T., Djordjevic, B., Baek, S.J., 2024. A procedural and technical experimental review on material tensile and impact properties under cryogenic temperatures. E3S Web of Conferences 563, 02034 Akbar, H.I., Atmaja, M.I.A., Surojo, E., Kusharjanta, B., Fanani, R.A., 2024, Magnesium Addition and Treatment of Reinforcement Particles in Al6061 – Sea Sand Composite on Coefficients Friction and Wear Rate. Mekanika: Majalah Ilmiah Mekanika 23, 33-40 Chand, S., Sood, S., Thakur, P., Gupta, K., 2023. Elasto-plastic stress deformation in an annular disk made of isotropic material and subjected to uniform pressure. Structural Integrity and Life 23, 61 – 64 Chen, L., Wang, Y.Z., 2010. A review on flame retardant technology in China. Part I: development of flame retardants. Polymers for Advanced Technologies 21, 1 – 26 Chen, Y., Yang, S., Fan, D., Li, G., Wang, S., 2019. Dual-enhanced hydrophobic and mechanical properties of long-range 3D anisotropic binary composite nanocellulose foams via bidirectional gradient freezing. ACS Sustainable Chemistry and Engineering Journal 7, 12878-12886 Chorlton, B., Forrest, B., Gales, J., Weckman, B., 2019. Performance of type X gypsum board on timber to non-standard fire exposure, Fire and Materials 45(7), 885 – 900 Clemente, M., 2013. City and the sea: maritime identity for urban sustainable regeneration. Territorio Della Ricerca Su Insediamenti E Ambiente 11, 9-34 Fei, T., Chen, H., Lin, J., 2014. Transparent superhydrophobic films possessing high thermal stability and improved moisture resistance from the deposition of MTMS- based aerogels. Colloids and Surfaces A: Physicochemical and Engineering Aspects 443, 255 – 264 Fuadi, A.P., Muttaqie, T., Nugroho, A.C.P.T., Kusuma, Y.F., Mukti, S., Kurniawan, M.A., Firmandha, T., Ismail, M., 2024. Patrol Boat Strengthening Against a Collision with COLL Notation Based on Class Rules and Regulation in Indonesia – An Overview. Mekanika: Majalah Ilmiah Mekanika 23, 1-11 Fyson, J.F., 1985. Design of small fishing vessels. Fishing New Books, Farnham, England Hansen-Bruhn, I., Hull, T.R., 2023. Flammability and burning behaviour of fire protected timber. Fire Safety Journal 140, 103918 International Organization for Standardization (ISO), 2019. ISO 834-14: Fire-Resistance Tests-Elements of Building Construction-Part 1 General Requirements, International Organization for Standardization, Genewa, Switzerland. Just, A., Schmid, J., König, J., 2012. Post-protection effect of heat-resistant insulations on timber-frame members exposed to fire, Fire and Materials 36(2), 153 – 163 Karyanto, K., Darmawan, Nurani, T.W., 2020. Kajian pasokan dan kebutuhan kayu untuk pembuatan kapal di Kabupaten Batang Provinsi Jawa Tengah. Jurnal Ilmu Dan Teknologi Perikanan Tangkap 5(2), 54-61. (In Indonesian). Kern, A.P., Amor, L.V., Angulo, S.C., Montelongo, A., 2018. Factors influencing temporary wood waste generation in high-rise building construction. Waste Management 78, 446-455 Kolaitis, D.I., Asimakopoulou, E.K., Founti, M.A., 2014. Fire protection of light and massive timber elements using gypsum plasterboards and wood based panels: a large-scale compartment fire test. Construction and Building Materials 73, 163-170 Lazović, T., Ljubojević, P., Trišović, N., Trišović, Z., 2024. Composite materials - current state of standardization. Structural Integrity and Life 24, 71 – 80 Manik, P., Tuswan, T., Azzam, M.A., Samuel, S., Prabowo, A.R., 2024. Thermal insulation properties of materials for fishing vessel coolboxes. Materialpruefung/Materials Testing 66, 433-446 Mensah, R.A., Jiang, L., Renner, J.S., Xu, Q., 2023.Characterisation of the fire behaviour of wood: from pyrolysis to fire retardant mechanisms, Journal of Thermal Analysis and Calorimetry 148(4), 1407-1422 Naila, F.C., 2014. Research Report: “Wawasan Sosial Budaya Bahari, Sejarah Maritim di Indonesia dan Kemiskinan Nelayan. Unive rsitas Hasanuddin, Makassar, Indonesia. (In Indonesian). Naufal, A.M., Prabowo, A.R., Muttaqie, T., Hidayat, A., Purwono, J., Adiputra, R., Akbar, H.I., Smaradhana, D.F., 2024. Characterization of sandwich materials – Nomex-Aramid carbon fiber performances under mechanical loadings: Nonlinear FE and convergence studies. Reviews on Advanced Materials Science 63, 20230177 Neumann, M., Herter, J., Droste, B.O., Hartwig, S., 2011. Compressive behaviour of axially loaded spruce wood under large deformations at different strain rates. European Journal of Wood and Wood Products 69, 345-357 Nugroho, A.C.P.T., Sasmito, C., Fuadi, A.P., Hendrik, D., Rahadi, C.W.K., Permana, R.D., Fuadi, N.M.R., 2023. Corrosion Rate Analysis and Prediction of the Remaining Life of the Research Vessel to Improve Ship Safety Aspects. Mekanika: Majalah Ilmiah Mekanika 22, 68-75 Petrović, Z., Burzić, Z., Sedmak, A., Grbović, A., Kostić, N., 2023. Corrosion effect on the remaining life of AA2024 -T351 components. Structural Integrity and Life 23, 98 – 101 Rahman, R.A., Prabowo, A.R., Ehlers, S., Braun, Yaningsih, I., Muhayat, N., Tjahjana, D.D.D.P., Adiputra, R. 2024. Analysis of the ballistic impact on sandwich panel: Influence of attack angle and target location in structure bullet interaction. Journal of the Brazilian Society of Mechanical Sciences and Engineering 46, 598 Saeed, N., Malen, J.A., Krisnamurti, R., 2024. Predicting effective thermal conductivity of multilayered assemblies related to wood-frame construction based on dielectric properties: Data exploration for application to rapid in-situ building energy evaluation. Construction and Building Materials 447, 138102