PSI - Issue 72

Dharmik Chauhan et al. / Procedia Structural Integrity 72 (2025) 529–537

536

4. X-ray diffraction analysis was used to confirm the component phases of aluminum 6061, boron carbide, and molybdenum disulfide during composite casting. Strong crystallinity and efficient reinforcing were suggested by the diffraction patterns' distinct, sharp peaks. Acknowledgement Authors extend their appreciation to the GUJCOST (Gujarat Council on Science and Technology) for their financial support throughout the project titled F.No. GUJCOST/STI/2023-24/350. This funding played a crucial role in enabling the execution of the research project and contributed significantly to its success. We would also like to acknowledge the Department of Mechanical Engineering, School of Technology, Pandit Deendayal Energy University, Gandhinagar Gujarat, India for installing a new stir casting machine for the manufacturing of Hybrid Metal Matrix Composites and conducting an experiment. We also like to acknowledge the Department of Mechanical Engineering, L. D. College of Engineering, Ahmedabad, Gujarat, India for supporting to counduct vickers hardness test. References Abebe Emiru, A., Sinha, D. K., Kumar, A., Yadav, A., 2023. Fabrication and Characterization of Hybrid Aluminium (Al6061) Metal Matrix Composite Reinforced with SiC, B4C and MoS2 via Stir Casting. International Journal of Metalcasting 17(2), 801–812. https://doi.org/ 10.1007/s40962-022-00800-1 Andrade, T. F. de, Wiebeck, H., Sinatora, A., 2016. Effect of surface finishing on friction and wear of Poly-Ether-Ether-Ketone (PEEK) under oil lubrication. Polímeros 26(4), 336–342. https://doi.org/10.1590/0104-1428.2183 Anusha, P., Sri, M. N. S., Vijayakumar, S., Rao, T. V. J., Paramasivam, P., Jeyakrishnan, S., Saxena, K. K., 2024. Design and optimization the wear characteristics for Al7178/TiO2/B4C/FA central hybrid composite. International Journal on Interactive Design and Manufacturing (IJIDeM) 18(8), 5773–5781. https://doi.org/10.1007/s12008-023-01341-5 Arivendan, A., Chen, X., Zhang, Y.-F., Gao, W., 2025. Assessing the structural, mechanical, and thermal performance of Linum usitatissimum/ carbon fiber composites by using novel WASPAS and CRITIC methods. Industrial Crops and Products 224, 120378. https://doi.org/10.1016 /j.indcrop.2024.120378 Arunachalam, J., R, S., Sathish, T., Makki, E., Giri, J. (2024). Influence of machining process of MoS2/B4C/Az31 Mg alloy composite and its tribological characteristics. AIP Advances 14(3). https://doi.org/10.1063/5.0200492 Ayyanar, S., Gnanavelbabu, A., Rajkumar, K., Loganathan, P., 2021. Studies on High Temperature Wear and Friction Behaviour of AA6061/B4C/hBN Hybrid Composites. Metals and Materials International 27(8), 3040–3057. https://doi.org/10.1007/s12540-020-00710-z Dafaalla, M., Sahib Azad, M., Ayirala, S., Alotaibi, M., Fahmi, M., Saleh, S., Al Shehri, D., Mahmoud, M., 2025. Potential of polymer’s viscosity and viscoelasticity for accessible oil recovery during low salinity polymer flooding in heterogeneous carbonates. Fuel 379, 133008. https://doi.org/10.1016/j.fuel.2024.133008 Dhanalakshmi, S., Mohanasundararaju, N., Venkatakrishnan, P. G., Karthik, V., 2018. Optimization of friction and wear behaviour of Al7075-Al 2 O 3 -B 4 C metal matrix composites using Taguchi method. IOP Conference Series: Materials Science and Engineering 314, 012025. https://doi.org/10.1088/1757-899X/314/1/012025 Guzmán, I., Granda, E., Cruz, C., Martínez, D., Vargas, B., Acevedo, J., Cruz, G., Avila, Y., Velazquez, R., Flores, L., 2022. Corrosion Performance and Mechanical Strength in Aluminum 6061 Joints by Pulsed Gas Metal Arc Welding. Materials 15(18), 6226. https://doi.org/10.3390/ma15186226 Irfan Ul Haq, M., Raina, A., Anand, A., Sharma, S. M., Kumar, R. 2020. Elucidating the Effect of MoS2 on the Mechanical and Tribological Behavior of AA7075/Si3N4 Composite. Journal of Materials Engineering and Performance 29(11), 7445–7455. https://doi.org/10.1007/ s11665-020-05197-8 Jiang, W., Jin, X., Zhang, H., Jiang, B., Jiang, Z., Zhang, Y., 2015. Poly(ether ether ketone)/wrapped graphite nanosheets with poly(ether sulfone) composites: Preparation, mechanical properties, and tribological behavior. Journal of Applied Polymer Science 132(14). https://doi.org/10. 1002/app.41728 Jiménez, A. E., Bermúdez, M. D., Carrión, F. J., Martínez-Nicolás, G., 2006. Room temperature ionic liquids as lubricant additives in steel– aluminium contacts: Influence of sliding velocity, normal load and temperature. Wear 261(3–4), 347–359. https://doi.org/10.1016/j.wear. 2005.11.004 Kiran, T. S., Prasanna Kumar, M., Basavarajappa, S., Viswanatha, B. M., 2014. Dry sliding wear behavior of heat treated hybrid metal matrix composite using Taguchi techniques. Materials & Design 63, 294–304. https://doi.org/10.1016/j.matdes.2014.06.007 Kumar, A., Kumar, R., Kumar, A., 2024. Study of Wear Rate of AA7050-7.5 B4C-T6 Composite and Optimization of Response Parameters using Taguchi Analysis. International Journal of Experimental Research and Review 39(Spl Volume), 73–81. https://doi.org/10.52756/ ijerr.2024.v39spl.005