PSI - Issue 64

Szymon Grzesiak et al. / Procedia Structural Integrity 64 (2024) 269–276 S. Grzesiak, C. de Sousa, M. Pahn / Structural Integrity Procedia 00 (2019) 000 – 000

276

8

Acknowledgements The authors would like to thank staff of Civil Engineering Department of RPTU in Kaiserslautern and Fraunhofer EZRT institute in Fürth for their support extended during the experimental works carried out in the laboratory. Special thanks go to the team at the ITWM Institute in Kaiserslautern for their support related to the MAVI software. References Czaderski, C., E. Martinelli, J. Michels and M. Motavalli, 2012. "Effect of curing conditions on strength development in an epoxy resin for structural strengthening". Composites Part B: Engineering 43(2): 398 – 410. DOI: 10.1016/j.compositesb.2011.07.006. DAfStb 591. Strengthening of Concrete Parts with adhesivly bonded reinforcement. Berlin, Beuth Verlag GmbH. Dybeł, P. and M. Kucharska , 2021. "X-ray CT Investigation of Bond Mechanism in Reinforced SCC Elements of Different Placement Technology". Materials 14(21). DOI: 10.3390/ma14216236. EN 1992-1-1, Ed. Eurocode 2: Design of concrete structures – Part 1-1: General rules and rules for buildings. Berlin, Beuth Verlag GmbH. fib Bulletin 90, 2019. Externally applied FRP reinforcement for concrete structures. Germany. Finckh, W., 2012. Einfluss bauteilspezifischer Effekte auf die Bemessung von mit CFK-Lamellen verstärkten Stahlbetonbauteilen. PhD Thesis, TU Munich. Fraunhofer ITWM, 2022. MAVI – Modular Algorithms for Volume Images. Giese, J., M. Herbers, F. Liebold, F. Wagner, S. Grzesiak, C. de Sousa, M. Pahn, H.-G. Maas, S. Marx, M. Curbach and B. Beckmann, 2023. "Investigation of the Crack Behavior of CRC Using 4D Computed Tomography, Photogrammetry, and Fiber Optic Sensing". Buildings 13(10): 2595. DOI: 10.3390/buildings13102595. Grzesiak, S., M. Pahn, A. Klingler, E. I. Akpan, M. Schultz-Cornelius and B. Wetzel, 2022. "Mechanical and Thermal Properties of Basalt Fibre Reinforced Polymer Lamellas for Renovation of Concrete Structures". Polymers 14(4). DOI: 10.3390/polym14040790. Grzesiak, S., M. Pahn and M. Schultz-Cornelius, 2022. "Effect of Strip Stiffness in Reinforced Concrete Members Strengthened with Carbon and Basalt Fibre-Reinforced Polymers". Conference: FPCC Conference Bradford. Grzesiak, S., M. Pahn and M. Schultz-Cornelius, 2022. "Influence of Material Stiffness on Bond Behaviour for CFRP and BFRP Strips Glued to Concrete Surface". IABSE Symposium Prague 2022 - Challanges for Existing and Oncoming Structures. DOI: 10.2749/prague.2022.0860. Grzesiak, S., M. Schultz-Cornelius and M. Pahn, 2023. "Experimental and analytical evaluation of externally bonded BFRP and CFRP strips on the load-bearing behaviour of reinforced concrete structures using distributed fibre optic sensing". Construction and Building Materials 400: 132452. DOI: 10.1016/j.conbuildmat.2023.132452. Günes, O., 2004. A fracture based approach to understanding debonding in FRP bonded structural members. PhD Thesis, Massachusetts Institute of Technology. Jansze, W., 1997. Strengthening of reinforced concrete members in bending by externally bonded steel plates. Delft, Univ. Press. Li, N., Y. Zhao, Y. Xing, X. He and H. Li, 2023. "Meso-damage analysis of concrete based on X-ray CT in-situ compression and using deep learning method". Case Studies in Construction Materials 18: e02118. DOI: 10.1016/j.cscm.2023.e02118. Liebold, F., F. Wagner, J. Giese, S. Grzesiak, C. de Sousa, B. Beckmann, M. Pahn, S. Marx, M. Curbach and H.-G. Maas, 2023. "Damage Analysis and Quality Control of Carbon-Reinforced Concrete Beams Based on In Situ Computed Tomography Tests". Buildings 13(10): 2669. DOI: 10.3390/buildings13102669. Michels, J., J. Sena-Cruz, C. Czaderski and M. Motavalli, 2013. "Structural Strengthening with Prestressed CFRP Strips with Gradient Anchorage". Journal of Composites for Constr. 17(5): 651 – 661. DOI: 10.1061/(ASCE)CC.1943-5614.0000372. Nizic, A., 2011. Low Cycle Fatigue of the bond of externally bonded reinforcement. PhD Thesis. Rettinger, M., J. Guhathakurta, P. Gänz, S. Simon and M. Schlaich, 2022. "Hinter den Kulissen". Beton- und Stahlbetonbau 117(5): 343 – 356. DOI: 10.1002/best.202200008. Timoshenko, S., 1955. Strength of materials Part 1. New York, NY, D. Van Nostrand Company, Inc.