PSI - Issue 56

Sergiu-Valentin Galațanu et al. / Procedia Structural Integrity 56 (2024) 138– 143 Author name / Structural Integrity Procedia 00 (2019) 000 – 000

143

6

Popa C.F., Mărghitaș M.P., Galațanu S.V., Marșavina L., 202 3. Influence of thickness on the IZOD impact strength of FDM printed specimens from PLA and PETG, Procedia Structural Integrity, Volume 41, Pages 557-563, ISSN 2452-3216, https://doi.org/10.1016/j.prostr.2022.05.064. Popa C.F., Krausz T., Galațanu S.V., Linul E., Marșavina L., 2022. Numerical and experimental study for FDM printed specimens from PLA under IZOD impact tests, Materials Today: Proceedings, Volume 78, Part 2, Pages 326-330, ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2022.11.501. Rijckaert, S., Daelemans, L., Cardon, L., Boone, M., Van Paepegem, W., & De Clerck, K. 2022. Continuous Fiber-Reinforced Aramid/PETG 3D Printed Composites with High Fiber Loading through Fused Filament Fabrication. Polymers, 14(2), 298. Schneevogt, H., Stelzner, K., Yilmaz, B., Abali, B. E., Klunker, A., & Völlmecke, C. 2021. Sustainability in additive manufacturing: Exploring the mechanical potential of recycled PET filaments. Composites and Advanced Materials, 30. Thompson, N., & Weaver, J. 2022. Closed Loop Recycling of Low Friction Polymers in Fused Granule Fabrication Additive Manufacturing Processes. Solid Freeform Fabrication Symposium. Vidakis, N., Petousis, M., Tzounis, L., Grammatikos, S. A., Porfyrakis, E., Maniadi, A., & Mountakis, N. 2021. Sustainable additive manufacturing: Mechanical response of polyethylene terephthalate glycol over multiple recycling processes. Materials, 14(5), 1162. Vashi Y, Anand R, Jayakrishna K, Rajyalakshmi G, Raj SA, 2021. Design andanalysis of 3D printed UAV wheel. Materials Today: Proceedings 2021; 46: 8307 – 8312. Zhu C, Li T, Mohideen MM, Hu P, Gupta R, Ramakrishna S, Liu Y, 2021. Realization of Circular Economy of 3D Printed Plastics: A Review. Polymers. 2021; 13(5):744.