PSI - Issue 37

Aleksandar Sedmak et al. / Procedia Structural Integrity 37 (2022) 263–268 Author name / Structural Integrity Procedia 00 (2019) 000 – 000

268 6

References

[1] Arsić, M., Karić , R., Sedmak, A., Burzić, M., Vistać, B., Methodological approach to integrity assessment and service life of rotating equipment at hydropower plant-turbine shaft, Structural integrity and life, Vol. 13, No 2 (2013), pp. 177-124. [2] Sedmak, A., Bosnjak, S., Arsic, M., Savic, Z., Integrity and life estimation of turbine runner cover in a hydro power plant, Frattura ed Integrita Strutturale 10(36):63-68 · April 2016. [3] Dojčinović, M. , Arsić, M., Bošnjak, S., Murariu, A., Malešević, Z., Cavitation Resistance of Turbine Runner Blades at the Hydro Power Plant ‘Djerdap 1’, Structural integrity and life, Vol. 17, No 1 (2017), pp. 55-60. [4] Sedmak, S., Arsić, M., Bajić, D., Mladenović, M., Savić, Z., Koprivica, S., Analysis of Causes of Degradation of Parent Material and Weld Metal of Breeches Pipe at Hydroelectric Power Plant ‘Perućica’ , Structural integrity and life, Vol. 15, No 3 (2015), pp. 147-151. [5] Momčilović D, Odanović Z, Mitrović R, Atanasovska I, Vuherer T. Failure analysis of hydraulic turbi ne shaft. Eng Fail Anal 2012; 20: 54 - 66. [6] Yongyao L, Zhengwei W, Jidi Z, Jiayang L. Fatigue of piston rod caused by unsteady, unbalanced, unsynchronized blade torques in a Kaplan turbine. Eng Fail Anal 2010; 17: 192 - 199. [7] Egusquiza E, Valero C, Huang X, Jou E, Guardo A, Rodriguez C. Failure investigation of a large pump-turbine runner. Eng Fail Anal 2012; doi: 10.1016/j.engfailanal. 2012.01.012. [8] Azevedo C.R.F, Magarotto D, Araújo J.A, Ferreira J.L.A. Bending fatigue of stainless steel shear pins belonging to a hydroelectric plant. Eng Fail Anal 2009; 16: 1126 - 1140. [9] Casanova F. Failure analysis of the draft tube connecting bolts of a Francis-type hydroelectric power plant. Eng Fail Anal 2009; 16: 2202 - 2208. [10 ] Arsić, M., Bošnj ak, S., Sedmak, A., Šarkoćević, Z. , Savić, Z., Radu, D., Determination of Damage and Repair Methodology for the Runner Man hole of Kaplan Turbine at the Hydro Power Plant ‘Djerdap 1’, Structural integrity and life, Vol. 16, No 3 (2016), pp. 1 49-153. [11] Medjo, B., Arsić, M. , Rakin, M., Sedmak, A., Malešević, Z. , Savić, Z., Integrity Assessment of Regulation System Pipeline Elements in Hydroelectric Generating Set A6 of Hydro Power Plant ‘Djerdap 1’ , Structural integrity and life, Vol. 16, No 2 (2016), pp. 71-78. [12] Arsić, M. , Burzić, M. , Karić, R., Vistać, B., Savić, Z., Methodology for Repairing Defects on Internal Surfaces of Cranks of Guide Vane Apparatus in Hydroelectric Generating Set at Hydropower Plant Djerdap 1, Structural Integrity and Life, Vol. 14, No 2 (2014), pp. 177-124. [13] Arsić, M., Karić, R., Sedmak, A., Burzić, M., Vistać, B., Methodological Approach to Integrity Assessment and Service Life of Rotating Equipment at Hydropower Plant – Turbine Shaft, Structural Integrity and Life, Vol. 14, No 2 (2014), pp. 141-146. [14] Sedmak A., Computational fracture mechanics: An overview from early efforts to recent achievements. Fatigue Fract Eng Mater Struct. Vol. 41, p. 2438 – 2474, 2018 [15] Mijatović, T. et al, Structural Integrity Assesment from the Aspect of Fracture Mechanics, Structural Integrity and Life, Vol.19, No.2, 2019, pp.121 – 124 [16] Jeremić, L., Sedmak, A., Milovanović, N., Milošević, N., Sedmak, S., Assessment of integrity of pressure vessels for com pressed air, Structural Integrity and Life, Vol. 21, No. 1, 2021, 3-6 [17] Olanrewaju Busari, Y., Prasada Manurung, Y., Welded high strength low alloy steel influence on fatigue crack propagation of using LEFM: A practical and thematic review, Structural integrity and life, Vol. 20, No 3 (2020), p. 147-151. [18] GOST 380-94, Structural carbon steel. Types, International standard, Interstate Council for Standardization, Metroloqy and Certification, 1994. [19] GOST 14637-89, Rolled sheets made of structural carbon steels. Technical conditions. Russion national Standards, 1989. [20] EN 10002-1, Metallic materials - Tensile testing - Part 1: Method of test (at ambient temperature), European Committee for Standardization, 2001.. [21] EN 10164, Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions, European Committee for Standardization, 2014.

[22] ASTM E647 - 15e1 Standard Test Method for Measurement of Fatigue Crack Growth Rates, 2015 [23] Test report, No. 421116-168/1pr, (in Serbian) Institut za ispitivanje materijala, Beograd, Srbija, 2011