PSI - Issue 37

Kafayat Eniola Hazzan et al. / Procedia Structural Integrity 37 (2022) 274–281 Hazzan and Pacella/ Structural Integrity Procedia 00 (2019) 000 – 000

281

8

Hasan, M., Zhao, J., Jiang, Z., 2019. Micromanufacturing of composite materials: a review. Int. J. Extrem. Manuf. 1, 012004. https://doi.org/10.1088/2631-7990/ab0f74 Hazzan, K.E., Pacella, M., See, T.L., 2021. Laser Processing of Hard and Ultra-Hard Materials for Micro-Machining and Surface Engineering Applications. Micromachines 12, 895. https://doi.org/10.3390/mi12080895 Jin, H., Lv, Z., Yuan, Z., Wei, Z., Wang, Cheng, Wang, Cong, Tu, Y., Li, F., Chen, T., Xiao, P., 2021. Micro-Cracks Identification and Characterization on the Sheds of Composite Insulators by Fractal Dimension. IEEE Trans. Smart Grid 12, 1821 – 1824. https://doi.org/10.1109/TSG.2020.3029444 Kim, H., Ahn, E., Shin, M., Sim, S.H., 2019. Crack and Noncrack Classification from Concrete Surface Images Using Machine Learning. Struct. Heal. Monit. 18, 725 – 738. https://doi.org/10.1177/1475921718768747 Koulali, R., Zaidani, H., Zaim, M., 2021. Image Classification Approach Using Machine Learning and an Industrial Hadoop Based Data Pipeline. Big Data Res. 24, 100184. https://doi.org/10.1016/j.bdr.2021.100184 Liang, L., Yuan, J., Li, X., Yang, F., Jiang, L., 2018. Wear behavior of the micro-grooved texture on WC-Ni3Al cermet prepared by laser surface texturing. Int. J. Refract. Met. Hard Mater. 72, 211 – 222. https://doi.org/10.1016/j.ijrmhm.2017.12.023 Marimuthu, S., Dunleavey, J., Smith, B., 2020. Picosecond laser machining of tungsten carbide. Int. J. Refract. Met. Hard Mater. 92, 105338. https://doi.org/10.1016/j.ijrmhm.2020.105338 Mohan, A., Poobal, S., 2018. Crack detection using image processing: A critical review and analysis. Alexandria Eng. J. 57, 787 – 798. https://doi.org/10.1016/j.aej.2017.01.020 Pacella, M., 2019. A new low-feed chip breaking tool and its effect on chip morphology. Int. J. Adv. Manuf. Technol. 104, 1145 – 1157. https://doi.org/10.1007/s00170-019-03961-2 Petrich, L., Westhoff, D., Feinauer, J., Finegan, D.P., Daemi, S.R., Shearing, P.R., Schmidt, V., 2017. Crack detection in lithium-ion cells using machine learning. Comput. Mater. Sci. 136, 297 – 305. https://doi.org/10.1016/j.commatsci.2017.05.012 Ranjan, R., Khan, A.R., Parikh, C., Jain, R., Mahto, R.P., Pal, S., Pal, S.K., Chakravarty, D., 2016. Classification and identification of surface defects in friction stir welding: An image processing approach. J. Manuf. Process. 22, 237 – 253. https://doi.org/10.1016/j.jmapro.2016.03.009 Ranjbar, S., Nejad, F.M., Zakeri, H., 2021. An image-based system for pavement crack evaluation using transfer learning and wavelet transform. Int. J. Pavement Res. Technol. 14, 437 – 449. https://doi.org/10.1007/s42947-020-0098-9 Schöttl, L., Kolb, P., Liebig, W. V., Weidenmann, K.A., Inal, K., Elsner, P., 2020. Crack characterization of discontinuous fiber-reinforced composites by using micro-computed tomography: Cyclic in-situ testing, crack segmentation and crack volume fraction. Compos. Commun. 21. https://doi.org/10.1016/j.coco.2020.100384 See, T.L., Chantzis, D., Royer, R., Metsios, I., Antar, M., Marimuthu, S., 2017. A comparison of the DPSS UV laser ablation characteristic of 1024 and H10F WC-Co. Opt. Laser Technol. 92, 101 – 108. https://doi.org/10.1016/j.optlastec.2017.01.018 Smith, G.T., 2008. Cutting Tool Technology. Springer London, London. https://doi.org/10.1007/978-1-84800-205-0 Vidal, M., Ostra, M., Imaz, N., García-Lecina, E., Ubide, C., 2016. Analysis of SEM digital images to quantify crack network pattern area in chromium electrodeposits. Surf. Coatings Technol. 285, 289 – 297. https://doi.org/10.1016/j.surfcoat.2015.11.049 Wang, B., Tao, F., Fang, X., Liu, C., Liu, Y., Freiheit, T., 2020. Smart Manufacturing and Intelligent Manufacturing: A Comparative Review. Engineering. https://doi.org/10.1016/j.eng.2020.07.017 Wu, X., Liu, X., 2021. Building crack identification and total quality management method based on deep learning. Pattern Recognit. Lett. 145, 225 – 231. https://doi.org/10.1016/j.patrec.2021.01.034 Yang, Z.J., Qsymah, A., Peng, Y.Z., Margetts, L., Sharma, R., 2020. 4D characterisation of damage and fracture mechanisms of ultra high performance fibre reinforced concrete by in-situ micro X-Ray computed tomography tests. Cem. Concr. Compos. 106, 103473. https://doi.org/10.1016/j.cemconcomp.2019.103473 Zou, Q., Cao, Y., Li, Q., Mao, Q., Wang, S., 2012. CrackTree: Automatic crack detection from pavement images. Pattern Recognit. Lett. 33, 227 – 238. https://doi.org/10.1016/j.patrec.2011.11.004