PSI - Issue 37

Kafayat Eniola Hazzan et al. / Procedia Structural Integrity 37 (2022) 274–281 Hazzan and Pacella/ Structural Integrity Procedia 00 (2019) 000 – 000

280

7

12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49

0.050 0.050 0.050 0.070 0.070 0.070 0.070 0.070 0.070 0.070 0.099 0.099 0.099 0.099 0.099 0.099 0.099 0.135 0.135 0.135 0.135 0.135 0.135 0.135 0.149 0.149 0.149 0.149 0.149 0.149 0.149 0.200 0.200 0.200 0.200 0.200 0.200 0.200

5.0

46

96.5426 96.3275 96.5680 97.2741 96.0939 95.7464 96.8084 96.6971 96.9369 97.7562 97.9961 96.6417 96.9038 96.9993 96.8591 96.4778 97.0465 96.5165 97.1018 97.0614 96.7043 96.7302 96.8263 96.4279 96.3741 97.0955 97.0989 96.6431 96.8194 96.6384 96.4269 96.5754 97.2919 96.9475 96.5529 97.0144 96.7561 96.8121

52.5 75.0 17.5 28.0 40.0 52.5 75.0 17.5 28.0 40.0 52.5 75.0 17.5 28.0 40.0 52.5 75.0 17.5 28.0 40.0 52.5 75.0 17.5 28.0 40.0 52.5 75.0 5.0 5.0 5.0 5.0 5.0

179 143 126 202 229 192 102 104 39

100.0

100.0

59

124

86

102

36

119 139 170

100.0

77 67

132

80

141 147 161

100.0

55 67

138

73

162 119

100.0

77 67 74

150

81

135

99

References

Bergs, T., Holst, C., Gupta, P., Augspurger, T., 2020. Digital image processing with deep learning for automated cutting tool wear detection. Procedia Manuf. 48, 947 – 958. https://doi.org/10.1016/j.promfg.2020.05.134 Calderón Urbina, J.P., Daniel, C., Emmelmann, C., 2013. Experimental and analytical investigation of cemented tungsten carbide ultra-short pulse laser ablation. Phys. Procedia 41, 752 – 758. https://doi.org/10.1016/j.phpro.2013.03.144 Denkena, B., Grove, T., Theuer, M., 2018. Micro crack formation in hardmetal milling tools. Int. J. Refract. Met. Hard Mater. 70, 210 – 214. https://doi.org/10.1016/j.ijrmhm.2017.10.008 Dumitru, G., Romano, V., Weber, H.P., Sentis, M., Marine, W., 2002. Femtosecond ablation of ultrahard materials. Appl. Phys. A Mater. Sci. Process. 74, 729 – 739. https://doi.org/10.1007/s003390101183 Eberle, G., Wegener, K., 2014. Ablation study of WC and PCD composites using 10 picosecond and 1 nanosecond pulse durations at green and infrared wavelengths. Phys. Procedia 56, 951 – 962. https://doi.org/10.1016/j.phpro.2014.08.115 Fang, S., Pérez, V., Salán, N., Baehre, D., Llanes, L., 2020. Surface Patterning of Cemented Carbides by Means of Nanosecond Laser. Mater. Manuf. Process. 35, 123 – 129. https://doi.org/10.1080/10426914.2019.1628268 Harris, C., Stephens, M., 2013. A Combined Corner and Edge Detector 23.1-23.6. https://doi.org/10.5244/c.2.23