PSI - Issue 24

12

Lorenzo Bergonzi et al. / Procedia Structural Integrity 24 (2019) 213–224 Lorenzo Bergonzi et al. / Structural Integrity Procedia 00 (2019) 000–000

224

Karnati, S, I Axelsen, F F Liou, and J W Newkirk. 2016. “Investigation of Tensile Properties of Bulk and SLM Fabricated 304L Stainless Steel Using Various Gage Length Specimens,” 13. Karnati, S, J L Hoerchler, F Liou, and J W Newkirk. 2017. “Influence of Gage Length on Miniature Tensile Characterization of Powder Bed Fabricated 304L Stainless Steel,” 18. Klueh, R. L. 1985. “Miniature Tensile Test Specimens for Fusion Reactor Irradiation Studies.” Nuclear Engineering and Design. Fusion 2 (3): 407–16. https://doi.org/10/ch2nhf. Kumar, Kundan, Arun Pooleery, and K Madhusoodanan. 2014. “Use Of Miniature Tensile Specimen And Video Extensometer For Measurement Of Mechanical Properties,” 20. LaVan, D. A., and W. N. Sharpe. 1999. “Tensile Testing of Microsamples.” Experimental Mechanics 39 (3): 210–16. https://doi.org/10.1007/BF02323554. Li, Xide, Yan Yang, and Cheng Wei. 2003. “In Situ and Real-Time Tensile Testing of Thin Films Using Double-Field-of-View Electronic Speckle Pattern Interferometry.” Measurement Science and Technology 15 (1): 75–83. https://doi.org/10/d7pn65. Liu, Haiting, Yao Shen, Shuang Yang, Pengfei Zheng, and Lei Zhang. 2017. “A Comprehensive Solution to Miniaturized Tensile Testing: Specimen Geometry Optimization and Extraction of Constitutive Behaviors Using Inverse FEM Procedure.” Fusion Engineering and Design 121 (October): 188–97. https://doi.org/10.1016/j.fusengdes.2017.07.016. Lucas, G E. 1990. “Review of Small Specimen Test Techniques for Irradiation Testing.” Metallurgical Transactions A , 15. Lucon, E. 2014. “1.08 - Testing of Small-Sized Specimens.” In Comprehensive Materials Processing , edited by Saleem Hashmi, Gilmar Ferreira Batalha, Chester J. Van Tyne, and Bekir Yilbas, 135–63. Oxford: Elsevier. https://doi.org/10.1016/B978-0-08-096532-1.00110-2. Mahabunphachai, Sasawat, and Muammer Koç. 2008. “Investigation of Size Effects on Material Behavior of Thin Sheet Metals Using Hydraulic Bulge Testing at Micro/Meso-Scales.” International Journal of Machine Tools and Manufacture 48 (9): 1014–1029. https://doi.org/10/fpxz7m. Nicoletto, Gianni. 2017. “A Novel Test Method for the Fatigue Characterization of Metal Powder Bed Fused Alloys.” Procedia Structural Integrity 7: 67–74. https://doi.org/10.1016/j.prostr.2017.11.062. Raulea, L. V., A. M. Goijaerts, L. E. Govaert, and F. P. T. Baaijens. 2001. “Size Effects in the Processing of Thin Metal Sheets.” Journal of Materials Processing Technology 115 (1): 44–48. https://doi.org/10/b8h9r4. Rund, Martin, Radek Procházka, Pavel Konopík, Jan Džugan, and Hugo Folgar. 2015. “Investigation of Sample-Size Influence on Tensile Test Results at Different Strain Rates.” Procedia Engineering 114: 410–15. https://doi.org/10.1016/j.proeng.2015.08.086. Sergueeva, A.V., J. Zhou, B.E. Meacham, and D.J. Branagan. 2009. “Gage Length and Sample Size Effect on Measured Properties during Tensile Testing.” Materials Science and Engineering: A 526 (1–2): 79–83. https://doi.org/10.1016/j.msea.2009.07.046. Sharpe, William N. 2003. “Murray Lecture Tensile Testing at the Micrometer Scale: Opportunities in Experimental Mechanics.” Experimental Mechanics 43 (3): 228–37. https://doi.org/10/dqgfpb. Slotwinski, John, and Shawn Moylan. 2014. “Applicability of Existing Materials Testing Standards for Additive Manufacturing Materials.” NIST IR 8005. National Institute of Standards and Technology. https://doi.org/10.6028/NIST.IR.8005. Wakai, E., S. Nogami, R. Kasada, A. Kimura, H. Kurishita, M. Saito, Y. Ito, et al. 2011. “Small Specimen Test Technology and Methodology of IFMIF/EVEDA and the Further Subjects.” Journal of Nuclear Materials , Proceedings of ICFRM-14, 417 (1): 1325–30. https://doi.org/10/cxff26. Xu, Yuanchao, Guangshen Ning, Changyi Zhang, Qingkai Yu, and Yanping Xu. 2000. “Application of the Miniature Specimen Technique to Material Irradiation Tests and Surveillance for Reactor Components.” International Journal of Pressure Vessels and Piping 77 (12): 715–21. https://doi.org/10.1016/S0308-0161(00)00066-1. Yan, Fuyao, Wei Xiong, and Eric Faierson. 2017. “Grain Structure Control of Additively Manufactured Metallic Materials.” Materials 10 (11): 1260. https://doi.org/10/gf33t8. Zhao, Y.H., Y.Z. Guo, Q. Wei, T.D. Topping, A.M. Dangelewicz, Y.T. Zhu, T.G. Langdon, and E.J. Lavernia. 2009. “Influence of Specimen Dimensions and Strain Measurement Methods on Tensile Stress–Strain Curves.” Materials Science and Engineering: A 525 (1–2): 68–77. https://doi.org/10.1016/j.msea.2009.06.031. Zhou, Bin, Jun Zhou, Hongxin Li, and Feng Lin. 2018. “A Study of the Microstructures and Mechanical Properties of Ti-6Al-4V Fabricated by SLM under Vacuum.” Materials Science and Engineering: A 724 (May): 1–10. https://doi.org/10/gdnxsf. Zyl, I. van, M. Moletsane, P. Krakhmalev, I. Yadroitsava, and I. Yadroitsev. 2016. “Validation of Miniaturised Tensile Testing on DMLS TI-6AL 4V (ELI) Specimens.” South African Journal of Industrial Engineering 27 (3): 192–200. https://doi.org/10/f3t3q8.