PSI - Issue 24

11

Lorenzo Bergonzi et al. / Structural Integrity Procedia 00 (2019) 000–000

Lorenzo Bergonzi et al. / Procedia Structural Integrity 24 (2019) 213–224

223

L 0 [mm] W [mm] L c [mm] T [mm]

15.00

3.50

20.00

2.00 7.00 5.65

2 ]

S 0 [mm

k s

Figure 9. M-Size MaCh3D miniaturized specimen.

L 0 [mm] W [mm] L c [mm] T [mm]

20

4.20

24.00

3.00

2 ]

S 0 [mm

12.60

5.65

k s

Figure 10. L-Size MaCh3D miniaturized specimen.

References

ASTM E8 / E8M-16a. 2016. Standard Test Methods for Tension Testing of Metallic Materials . West Conshohocken, PA: ASTM International. https://doi.org/10.1520/E0008_E0008M-13A. Bergonzi, Lorenzo, Matteo Vettori, Alessandro Pirondi, Fabrizio Moroni, and Francesco Musiari. 2018. “Numerical and Experimental Validation of a Non-Standard Specimen for Uniaxial Tensile Test.” Procedia Structural Integrity 12: 392–403. https://doi.org/10.1016/j.prostr.2018.11.078. Dongare, Sujitkumar. 2012. “Development of a Technique for Testing of Tensile Properties with Miniature Size Specimens for Metal Additive Manufacturing.” Master Theses, Missouri University if Science and Technology. http://scholarsmine.mst.edu/masters_theses/7532. Dyson, C. C., W. Sun, C. J. Hyde, S. J. Brett, and T. H. Hyde. 2016. “Use of Small Specimen Creep Data in Component Life Management: A Review.” Materials Science and Technology 32 (15): 1567–81. https://doi.org/10/gf8pm3. EN ISO 6892-1:2016. 2016. Metallic Materials - Tensile Testing - Part 1 Method of Test at Room Temperature . International Organization for Standardization. Frey, Michael, Mike Shellabear, and Lena Thorsson. 2009. “Mechanical Testing of DMLS Parts.” EOS GmbH. Gu, D. D., W. Meiners, K. Wissenbach, and R. Poprawe. 2012. “Laser Additive Manufacturing of Metallic Components: Materials, Processes and Mechanisms.” International Materials Reviews 57 (3): 133–64. https://doi.org/10/fzsbgn. Hamid, Fabler. 2016. “Design Miniaturized Tensile Testing Machine.” In . Bánki. Husain, Asif, D.K. Sehgal, and R.K. Pandey. 2004. “An Inverse Finite Element Procedure for the Determination of Constitutive Tensile Behavior of Materials Using Miniature Specimen.” Computational Materials Science 31 (1–2): 84–92. https://doi.org/10.1016/j.commatsci.2004.01.039. Isono, Yoshitada, Takahiro Namazu, and Nobuyuki Terayama. 2006. “Development of AFM Tensile Test Technique for Evaluating Mechanical Properties of Sub-Micron Thick DLC Films.” Journal of Microelectromechanical Systems 15 (1): 169–180. https://doi.org/10/b6gvxq. Jung, P., A. Hishinuma, G. E. Lucas, and H. Ullmaier. 1996. “Recommendation of Miniaturized Techniques for Mechanical Testing of Fusion Materials in an Intense Neutron Source.” Journal of Nuclear Materials 232 (2): 186–205. https://doi.org/10/dh4ds9. Kals, T. A., and Ralf Eckstein. 2000. “Miniaturization in Sheet Metal Working.” Journal of Materials Processing Technology 103 (1): 95–101. https://doi.org/10/fn4grf.