Issue 57

B. Wang, et alii, Frattura ed Integrità Strutturale, 57 (2021) 291-299; DOI: 10.3221/IGF-ESIS.57.21

[5] Long, Q. Z., Gui, J. C., Zhang, X., Fu, H.L. (2016). Study on mechanical performance simulation method of key components in double horse head pumping unit. IEEE International Conference on Ubiquitous Robots & Ambient Intelligence, pp.152 – 156. DOI: 10.1109/URAI.2016.7734044. [6] Wu, W., Xu, T., He, P.F. (2019). Development of analysis and optimization software for dual horse head pumping unit with single arc back horse head based on GUI editor. IOP Conference Series: Earth and Environmental Science 242, pp.022052. DOI: 10.1088/1755-1315/242/2/022052. [7] Feng, Z.M, Zhang, J.D., Gu, H.B., Luan, Y.W. (2013). Research on energy-saving technology of crank balanced pumping unit. Research Journal of Applied Sciences Engineering and Technology, 6(22), pp.4152 – 4157. DOI: 10.19026/rjaset. 6.3525. [8] Elmer, W.G., Elmer, J.B. (2018). Pump-stroke optimization: case study of twenty-well pilot. SPE Production & Operations, 33, pp.419 – 436. DOI: 10.2118/181228-MS. [9] Leng, X.M., Liu, H. T. (2007). Design on the high-efficiency PM synchronous motor with high start torque in purpose of drawing out oil. Electrical Machinery Technology, 3, pp. 5 – 7. (in Chinese) [10] Feng, Z., Ma, Q.Y., Liu, X.L., Cui, W., Tan, C.D., Liu, Y. (2020). Dynamic coupling modelling and application case analysis of high-slip motors and pumping units. PLoS One, 15(1), pp. e0227827. DOI: 10.1371/journal.pone.0227827. [11] Luo, Y. L., Cui, X. S., Zhao, H. S. (2011). A multifunction energy-saving device with a novel power-off control strategy for beam pumping motors. IEEE Industry Applications Society 56th Annual Petroleum and Chemical Industry Conference, Anaheim, CA, USA, pp. 1606 – 1611. DOI: 10.1109/PCICON.2009.5297164. [12] Gogolyuk, P., Lysiak, V., Grinberg, I. (2008). Influence of a frequency control strategies on induction motor-centrifugal pump unit and its modes. IEEE International Symposium on Industrial Electronics, pp. 656 – 661. DOI: 10.1109/ISIE. 2008.4676893. [13] He, J.P., Ji, K., Xu, M., Mei, G.Z., Lin, D.R., Xia, H.J. (2018). Analysis of variable frequency energy-saving operation of beam pumping unit. IOP Conference Series: Materials Science and Engineering, 452, 4, pp.042185. DOI: 10.1088/1757-899X/452/4/042185. [14] Lv, H.Q., Liu, J., Han, J.Q., An, J. (2016). An energy saving system for a beam pumping unit. Sensors, 16(5), pp.685. DOI: 10.3390/s16050685. [15] Abdullah, A., Luis, V.R., Antonio, A.M., Angus, M., Haytham, R., Khalid, S., Dimas, L.P., Amur, H., Khadija, S., Shehu, A. Kevin, D.A. (2017). Self optimizing thermal field using beam pumps with variable speed drive. SPE-188137-MS. SPE Kingdom of Saudi Arabia Annual Technical Symposium and Exhibition, pp. 1 – 11. DOI: 10.2118/188137-MS. [16] Napoles, J., Leon, J.I., Portillo, R., Franquelo, L.G., Aguirre, M.A. (2010). Selective harmonic mitigation technique for high-power converters. IEEE Transactions on Industrial Electronics, 57(7), pp.2315 – 2323. DOI: 10.1109/TIE.2009. 2026759. [17] Liu, L.H. (2019). Calculation and study of balance performance of oil pumping unit with dynamic balance. Machinery, 11(45), pp.27 – 30. (in Chinese) [18] Chang, Z.Y., Yu, Y.Q., Qi, Y.G. (2017). Study on dynamic characteristics of hydraulic pumping unit on offshore platform. China Ocean Engineering, 31(006), pp.693 – 699. DOI:10.1007/s13344-017-0079-1. [19] Larrainzar, C., Korin, I., Ipiña, J. P. (2010). Analysis of fatigue crack growth and estimation of residual life of the walking beam of an oilfield pumping unit. Engineering Failure Analysis, 17(5), pp.1038 – 1050. DOI:10.1016/j.engfailanal. 2009.12.003. [20] Carpenter, C. (2015). Reliability improvement in beam pumps by use of a unique methodology. Journal of Petroleum Technology, 67, pp.96 – 98. DOI: 10.2118/0715-0096-JPT. [21] Bhagavatula, R., Fashesan, O. A., Heinze, L. R., Lea, J.F. A computational method for planar kinematic analysis of beam pumping units. Journal of Energy Resources Technology, 2007, 129(4), pp.300. DOI: 10.1115/1.2790981. [22] Ding, H., Xie, J.F., Bai, Z.Q., Li, Y., Li, H.B. (2019). Fracture analysis of a connecting rod for oil pumping unit in china western oilfield. Engineering Failure Analysis, 105, pp.313-320. DOI:10.1016/j.engfailanal.2019.07.021. [23] Hansen, B., Tolbert, B., Vernon, C., Hedengren, J.D. (2019). Model predictive automatic control of sucker rod pump system with simulation case study. Computers & Chemical Engineering, 121, pp.265 – 284. DOI: 10.1016/j.compchemeng. 2018.08.018. [24] Gibbs, S.G. (1975). Computing gearbox torque and motor loading for beam pumping units with consideration of inertia effects. Journal of Petroleum Technology, 27 (9), pp.1153 – 1159. DOI: 10.2118/5149-PA.

299