| Cover | 1 |
| TOC | 3 |
| Editorial Team | 6 |
| Sister Associations | 9 |
| Editorial | 11 |
| H. S. Patil, D. C. Patel - The effect of surface texturing in the sliding surface on tribological characteristics of alloy steel under wet condition | 13 |
| V. Bharath, V Auradi, M. Nagaral - Fractographic characterization of Al2O3p Particulates Reinforced Al2014 Alloy Composites subjected to Tensile loading | 26 |
| F. Boursas, D. Boutagouga - Parametric study of I-shaped shear connectors with different orientations in push-out test | 36 |
| T. Salem, H. Maaly, A. Abdelbaset - Analysis of above-ground steel storage tanks resting over piles or stone columns | 52 |
| T. Boudina, D. Benamara, R. Zaitri - Optimization of High-Performance-Concrete properties containing fine recycled aggregates using mixture design modeling | 62 |
| M. Moreira, J. C. Ramos, A. Messias, M. A. Neto, A. Amaro, P.N.B. Reis - Impact response of different materials for sports mouthguards | 75 |
| A. Sobhy, L. A. Nour, H. Hassan, A. El-Sisi - Behavior of structural concrete frames with hybrid reinforcement under cyclic loading | 82 |
| R. N. da Cunha, K. M. Oliveira, A. G. L. R. Brito, C. S. Vieira, D. L. N. F. Amorim - Evaluation of the behaviour of reinforced concrete beams repaired with glass fibre reinforced polymer (GFRP) using a damage variable | 94 |
| A. Aliche, H. Hammoum, K. Bouzelha, Y. Aoues, O. Amiri, Y. Mehani - Fragility analysis of concrete elevated water tanks under seismic loads | 105 |
| R. Fincato, S. Tsutsumi, A. Zilio, G. Mazzucco, V. Salomoni - Fully implicit numerical integration of the Yoshida-Uemori two-surface plasticity model with isotropic hardening stagnation | 126 |
| J. R. Chandrashekar, M. H. Annaiah, R. Chandrashekar - Microstructure and mechanical properties of aluminum cast alloy A356 reinforced with dual-size B4C particles | 139 |
| Abbasali Sadeghi, Hamid Kazemi, Mayasam Samadi - Reliability and reliability-based sensitivity analyses of steel moment-resisting frame structure subjected to extreme actions | 150 |
| I.Boudjemaa, A. Sahli, A. Benkhettou, S.Benbarek - Preliminary results on the effects of orthopedic implant stiffness fixed to the cut end of the femur on the stress at the stump-prosthetic interface | 172 |
| M. Chaib, A. Slimane, S. A. Slimane, A. Ziadi, B. Bouchouicha - Optimization of Ultimate Tensile Strength with DOE approach for application FSW process in the aluminum alloys AA6061-T651 and AA7075 -T651 | 181 |
| M. Bentahar, H. Benzaama, M. Noureddin - Numerical modeling of the contact effect on the parameters of cracking in a 2D Fatigue Fretting Model | 194 |
| K. Benyahi, M. S. Kachi, Y. Bouafia, S. Barboura, J. Li - Reliability assessment of the behavior of reinforced and/or prestressed concrete beams sections in shear failure | 207 |
| R. Andreotti, S. Abate, A. Casaroli, M. Quercia, R. Fossati, M.V. Boniardi - A simplified ALE model for finite element simulation of ballistic impacts with bullet splash – development and experimental validation | 235 |
| C. Lupi, F. Felli, E. Ciro, C. Paris, C. Vendittozzi - Railway overhead contact wire monitoring system by means of FBG sensors | 258 |
| M. T. Nawar, K. A. El-Awady, H. K. Shehab, A. S. Eisa - Enhancement of blast resistance of R.C beams using micro/nano silica in the presence of steel fibers | 271 |
| F. Allaoua, H. Lebbal, A. Belarbi - Finite Element analysis of stress state in the cement of total hip prosthesis with elastomeric stress barrier | 293 |
| B. Wang, D.-C. Chen - Dynamic strength analysis of the key components of the beam-type pumping unit with dynamic tracking balance | 303 |
| E. Sgambitterra, F. Niccoli - Inverse problems with the digital image correlation: approach and applications | 312 |
| M. Słowik - Analysis of fracture processes in reinforced concrete beams without stirrups | 333 |
| A. Kusch, S. Salamina, D. Crivelli, F. Berto - Strain energy density criterion as failure assessment for quasi-static uni-axial tensile load | 343 |
| H. S. Patil, D. C. Patel - Age-hardening heat treatment behavior of as-cast Mg–Zn–Al alloys | 362 |
| S. Derouiche, S. Bouziane, H. Bouzerd - Mixed Finite Element Computation of Energy Release Rate in Anisotropic Materials Based on Virtual Crack Closure-Integral Method | 371 |
| A. Basiri, A. Dadashi, M. Azadi, G. Winter, B. Seisenbacher, F. Grün - Effect of nano-clay addition and heat treatment on tensile and stress-controlled low-cycle fatigue behaviors of aluminum-silicon alloy | 385 |