Issue 57

J. R. Chandrashekar et alii, Frattura ed Integrità Strutturale, 57 (2021) 127-137; DOI: 10.3221/IGF-ESIS.57.11

[11] Hu, Q., Zhao, H. and Li, F. (2016). Effects of Manufacturing Processes on Microstructure and Properties of Al/A356– B4C Composites, Materials and Manufacturing Processes, 31(10), pp. 1292-1300. DOI: 10.1080/10426914.2016.1151049. [12] Nirala. A., Soren, S., Kumar, N.and Kaushal, D.R. (2019). A comprehensive review on mechanical properties of Al- B4C stir casting fabricated, composite Materials Today proceedings, 21(3), pp. 1432-1435. DOI: 10.1016/j.matpr.2019.09.172. [13] Sukesha, V., Ranjan, R., Nagesh, G. and Sekar, K. (2014). Fabrication and study on mechanical and tribological properties of NanoAl 2 O 3 and Micro B 4 C Particles reinforced A356 Hybrid composites, (AIMTDR). [14] Rajmohan, T., Palanikumar, K. and Ranganathan, S. (2013). Evaluation of mechanical and wear properties of hybrid aluminum matrix composites, Transactions of Nonferrous Metals Society of China, 23(9), pp. 2509-2517. DOI: 10.1016/S1003-6326(13)62762-4. [15] Nanda Kumar, N. and Muthukumaran, N. (2019). Experimental Investigation on Microstructural and Wear Behaviour of Dual Reinforced Particles (DRP) Aluminium Alloy Composites, Advanced Materials Research, 1159(1), pp. 42-53. DOI: 10.4028/www.scientific.net/AMR.1159.42. [16] Bindumadhavan, P.N., Keng Wah, H. and Prabhakar, O. (2001). Dual particle size (DPS) composites: effect on wear and mechanical properties of particulate metal matrix composites, wear, 248(1), pp.112-120. DOI: 10.1016/S0043-1648(00)00546-9. [17] Stojanovic, B. and Ivanovic, L. (2015). Application of aluminium hybrid composites in automotive industry, Research gate, Article in Tehnicki Vjesnik, 22(1), pp. 247-251. DOI: 10.17559/TV-20130905094303. [18] Islam, S. K., Das, T.,Das. P. (2015). Deformation behaviour of Rheocast A356 Al alloy at microlevel considering approximated RVEs, Metals and Materials International, 21(2), pp.311-323. DOI: 10.1007/s12540-015-4234 [19] Kumar, S., Sharma, V., Panwar, R.S. (2012). Wear Behavior of Dual Particle Size (DPS) Zircon Sand Reinforced Aluminum alloy. Tribol Lett, 47(3), pp.231–251. DOI: 10.1007/s11249-012-9983. [20] Montoya-Davilaa, M., Pech-Canul, M.A, Pech-Canul, M.I. (2007). Effect of bimodal and tri-size distribution on thesuperficial hardness of Al/SiCp composites prepared by pressure less infiltration. Powder Technology, 176(2), pp. 66-71. DOI: 10.1016/j.powtec.2007.02.008. [21] Lakshmikanthan, A., Bontha, S., Krishna, M., Praveennath, G. and Koppad Ramprabhu., T. (2019). Microstructure, mechanical and wear properties of the A357 composites reinforced with dual sized SiC particles, Journal of Alloys and Compounds, 786(8), pp. 570-580. DOI: 10.1016/j.jallcom.2019.01.382. [22] Beigi Khosroshahi, N., Taherzadeh Mousavian, R., Azari Khorsoshahi, R. and Brabazon, D. (2015). Mechanical properties of rolled A356 based composites reinforced by Cu coated bimodal ceramic particles, Material &Design, 83(5), pp.678-688. DOI: 10.1016/j.matdes.2015.06.027. [23] Venkat Kishore, N. and Venkata Rao, K. (2016). Mechanical Properties in MMC of Aluminum Alloy (A356/LM25) Matrix and Boron Carbide (B4C) Reinforcement, International Journal of Engineering Research & Technology (IJERT), 5(2), pp.683-689. [24] Fu, S.-Y., Feng, X.-Q., Lauke, B. and Mai, Y. W. (2008). Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate, polymer composites Composites Part B, 39(6), pp.933–961. DOI: 10.1016/j. compositesb.2008.01.002 . [25] Kanta Das, D., Chandra Mishra, P., Singh, S. and Kumar Thakur, R. (2014). Properties of ceramic-Reinforced aluminium matrix composites - a review, International Journal of Mechanical and Materials Engineering, 9(12), pp.1- 16. DOI:10.1186/s40712-014-0012-9. [26] Kori, S.A. and Chandrashekharaiah, T.M. (2007). Studies on the dry sliding wear behavior of hypoeutectic and eutectic Al-SiC alloys, wear, 263(1), pp. 745-755. DOI: 10.1016/j.wear.2006,11,026. [27] Karabulut, S., Karakoc, H. and C ı tak, R. (2016). Influence of B4C particle reinforcement on mechanical and machining properties of Al6061/B4C composites, Composites Part B, 101(15), pp. 87-98. DOI: 10.1016/j.compositesb.2016.07.006. [28] Chen, Z., Hao, X., Wang, Y.and Zhao, K. (2014). In-situ observation of tensile fracture in A357 casting alloys, J. Mater. Sci.Technol, 30(6), pp. 139-145. DOI: 10.1016/j.jmst.2013.04.014. [29] Jiang, W., Fan, Z., Dai, Y. and Li, C. (2014). Effects of rare earth elements addition on microstructures, tensile properties and fractography of A357 alloy, Mater. Sci.Eng, A 597(12), pp.237-244. DOI: 10.1016/j.msea.2014.01.009.

137