Issue 78

T. Nasri et alii, Frattura ed Integrità Strutturale, 78 (2026) 275-297; DOI: 10.3221/IGF-ESIS.78.17

R EFERENCES

[1] Ritchie, R.O. (1999). Mechanisms of fatigue-crack propagation in ductile and brittle solids. Int. J. Fracture, 100, pp. 55– 83. DOI: https://doi.org/10.1023/A:1018655917051. [2] Schijve, J. (2009). Fatigue of Structures and Materials. 2nd ed. Springer, Dordrecht. [3] Hatch, J.E. (1984). Aluminum: Properties and Physical Metallurgy. ASM International, Metals Park. [4] Starke, E.A. and Staley, J.T. (1996). Application of modern aluminum alloys to aircraft. Prog. Aerosp. Sci., 32, pp. 131– 172. DOI: https://doi.org/10.1016/0376-0421(95)00004-6. [5] Miller, K.J. (1987). The behaviour of short fatigue cracks and their initiation. Fatigue Fract. Eng. Mater. Struct., 10, pp. 75–113. DOI: https://doi.org/10.1111/j.1460-2695.1987.tb01149.x. [6] Suresh, S. and Ritchie, R.O. (1984). Propagation of short fatigue cracks. Int. Met. Rev., 29, pp. 445–476. DOI: https://doi.org/10.1179/imtr.1984.29.1.445. [7] Paris, P.C. and Erdogan, F. (1963). A critical analysis of crack propagation laws. J. Basic Eng., 85, pp. 528–534. DOI: https://doi.org/10.1115/1.3656900. [8] ASTM E647-23. Standard Test Method for Measurement of Fatigue Crack Growth Rates. ASTM International, 2023. [9] Pearson, S. (1975). Initiation of fatigue cracks in commercial aluminium alloys and the subsequent propagation of very short cracks. Eng. Fract. Mech., 7, pp. 235–247. DOI: https://doi.org/10.1016/0013-7944(75)90004-1. [10] Lankford, J. (1982). The growth of small fatigue cracks in 7075-T6 aluminum. Fatigue Fract. Eng. Mater. Struct., 5, pp. 233–248. DOI: https://doi.org/10.1111/j.1460-2695.1982.tb01250.x. [11] Taylor, D. and Knott, J.F. (1981). Fatigue crack propagation behaviour of short cracks; the effect of microstructure. Fatigue Fract. Eng. Mater. Struct., 4, pp. 147–155. DOI: https://doi.org/10.1111/j.1460-2695.1981.tb01116.x. [12] Ravichandran, K.S. and Dwarakadasa, E.S. (1991). Fatigue crack growth transitions in steels. Scripta Metall. Mater., 25, pp. 2115–2120. DOI: https://doi.org/10.1016/0956-716X(91)90290-4. [13] Zhai, T., Wilkinson, A.J. and Martin, J.W. (2000). A crystallographic mechanism for fatigue crack propagation through grain boundaries. Acta Mater., 48, pp. 4917–4927. DOI: https://doi.org/10.1016/S1359-6454(00)00214-7. [14] Chen, H., Liu, S., Wang, P., Wang, X., Liu, Z. and Aldakheel, F. (2024). Effect of grain structure on fatigue crack propagation behavior of 2024 aluminum alloy under different stress ratios. Mater. Des., 244, p. 113117. DOI: https://doi.org/10.1016/j.matdes.2024.113117. [15] Chen, Y.Q., Pan, S.P., Zhou, M.Z., Yi, D.Q., Xu, D.Z. and Xu, Y.F. (2013). Effects of inclusions, grain boundaries and grain orientations on the fatigue crack initiation and propagation behavior of 2524-T3 Al alloy. Mater. Sci. Eng. A, 580, pp. 150–158. DOI: https://doi.org/10.1016/j.msea.2013.05.053. [16] Jin, J.W., Hou, J.P., Gong, B.S., Wang, H.W., Zhou, X.H., Purcek, G., Sheinerman, A.G., Zhang, Z.F. (2025). Effects of microstructure on the fatigue crack initiation and propagation behavior of 7075 aluminum allo y. Materials Characterization, 220, 114682. DOI: https://doi.org/10.1016/j.matchar.2024.114682 [17] Shang, H., Guo, F., Cui, M., Li, Y., Xu, C., Zhai, T. (2026). The Anisotropy of Fatigue Crack Initiation and Propagation in an AA2024-T7 Al Alloy Plate . Journal of Materials Engineering and Performance. DOI: https://doi.org/10.1007/s11665-026-13481-2 [18] Borges, M.F., Lopez-Crespo, P., Antunes, F.V., Moreno, B., Prates, P., Camas, D. and Neto, D.M. (2021). Fatigue crack propagation analysis in 2024-T351 aluminium alloy using nonlinear parameters. Int. J. Fatigue, 153, p. 106478. DOI: https://doi.org/10.1016/j.ijfatigue.2021.106478. [19] Forman, R.G., Kearney, V.E. and Engle, R.M. (1967). Numerical analysis of crack propagation in cyclic-loaded structures. J. Basic Eng., 89, pp. 459–464. DOI: https://doi.org/10.1115/1.3609637. [20] Walker, K. (1970). The effect of stress ratio during crack propagation and fatigue for 2024-T3 and 7075-T6 aluminum. In: Effects of Environment and Complex Load History on Fatigue Life. ASTM STP 462, pp. 1–14. [21] Forman, R.G. and Mettu, S.R. (1992). Behavior of surface and corner cracks subjected to tensile and bending loads in Ti-6Al-4V alloy. In: Fracture Mechanics: 22nd Symposium. ASTM STP 1131, pp. 519–546. [22] Navarro, A. and de los Rios, E.R. (1988). A microstructurally-short fatigue crack growth equation. Fatigue Fract. Eng. Mater. Struct., 11, pp. 383–396. DOI: https://doi.org/10.1111/j.1460-2695.1988.tb01211.x. [23] McDowell, D.L. and Dunne, F.P.E. (2010). Microstructure-sensitive computational modeling of fatigue crack formation. Int. J. Fatigue, 32, pp. 1521–1542. DOI: https://doi.org/10.1016/j.ijfatigue.2010.01.003. [24] MacLachlan, D.W., Karamitros, V., Dunne, F.P.E. (2023). Mechanistic modelling of fatigue nucleation and short crack growth in polycrystalline alloys. Journal of the Mechanics and Physics of Solids, 105314. DOI: https://doi.org/10.1016/j.jmps.2023.105314

295