Issue 78

A. Zakharov et alii, Fracture and Structural Integrity, 78 (2026) 260-274; DOI: 10.3221/IGF-ESIS.78,16

R EFERENCES

[1] Hutchinson, J.W. (1968). Plastic stress and strain fields at a crack tip, J. Mech. Phys. Solids, 16(5), pp. 337–342, DOI: https://doi.org/10.1016/0022-5096(68)90021-5. [2] Hutchinson, J.W. (1968). Singular behaviour at the end of a tensile crack in a hardening material, J. Mech. Phys. Solids, 16(1), pp. 13–31, DOI: https://doi.org/10.1016/0022-5096(68)90014-8. [3] Rice, J.R., Rosengren, G.F. (1968). Plane strain deformation near a crack tip in a power-law hardening material, J. Mech. Phys. Solids, 16(1), pp. 1–12, DOI: https://doi.org/10.1016/0022-5096(68)90013-6. [4] Aoki, S., Kishimoto, K., Yoshida, T., Sakata, M. (1987). A finite element study of the near crack tip deformation of a ductile material under mixed mode loading, J. Mech. Phys. Solids, 35(4), pp. 431–455, DOI: https://doi.org/10.1016/0022-5096(87)90046-9. [5] Rice, J. (1968). A path independent integral and the approximate analysis of strain concentration y notches and cracks, J. Appl. Mech., 35, pp. 379–386, DOI: https://doi.org/10.1115/1.3601206. [6] Shih, C.F. (1974). Small-scale yielding analysis of mixed mode plane-strain crack problems, ASTM Spec. Tech. Publ., 560, pp. 187–210. [7] Shlyannikov, V.N., Tumanov, A. V. (2014). Characterization of crack tip stress fields in test specimens using mode mixity parameters, Int. J. Fract., 185(1–2), pp. 49–76, DOI: https://doi.org/10.1007/s10704-013-9898-0. [8] Fleck N.A., Hutchinson, J.W. (1993). A phenomenological theory for strain gradient effects in plasticity, J. Mech. Phys. Solids, 41, pp. 1825–1857. [9] Fleck N.A., Hutchinson J.W. (1997). Strain gradient plasticity, Adv. Appl. Mech., 33, pp. 295–361, DOI: https://doi.org/10.1016/S0065-2156(08)70388-0. [10] Fleck N.A., Hutchinson, J.W. (2001). A reformulation of strain gradient plasticity, J. Mech. Phys. Solids, 49, pp. 2245– 71, DOI: https://doi.org/10.1016/S0022-5096 (01)00049-7. [11] Shlyannikov, V.N., Martínez-Pañeda, E., Tumanov, A.V., Tartygasheva, A.M. (2021). Crack tip fields and fracture resistance parameters based on strain gradient plasticity, Int. J. Solids Struct., 208–209, pp. 63–82, DOI: https://doi.org/10.1016/j.ijsolstr.2020.10.015. [12] Shlyannikov, V., Martínez-Pañeda, E., Tumanov, A., Khamidullin, R. (2021). Mode I and mode II stress intensity factors and dislocation density behaviour in strain gradient plasticity, Theor. Appl. Fract. Mech., 116, pp. 1–15, DOI: https://doi.org/10.1016/j.tafmec.2021.103128. [13] Martínez-Pañeda, E., Natarajan, S., Bordas, S. (2017). Gradient plasticity crack tip characterization by means of the extended finite element method, Comput. Mech., 59, pp. 831–842, DOI: https://doi.org/10.1007/s00466-017-1375-6. [14] Martínez-Pañeda, E., Fuentes-Alonso, S., Betegón, C. (2019). Gradient-enhanced statistical analysis of cleavage fracture, Eur. J. Mech. - A/Solids, 77, DOI: https://doi.org/10.1016/j.euromechsol.2019.05.002. [15] Martínez-Pañeda, E., Fleck N.A. (2019). Strain gradient plasticity theory versus J2 flow theory, Eur. J. Mech. - A/Solids, 75, pp. 381–388, DOI: https://doi.org/10.1016/j.euromechsol.2019.02.009. [16] Hilton, P.D., Hutchinson, J.W. (1971). Plastic intensity factors for cracked plates, Eng. Fract. Mech., 3, pp. 435–451, DOI: https://doi.org/10.1016/0013-7944(71)90057-9. [17] Hilton, P.D., Sih, G.C. (1973).Applications of the finite element method to the calculations of stress intensity factors. Methods of analysis and solutions of crack problems, pp. 426–483. [18] Hilton, P.D. (1973). Plastic intensity factors for cracked plates subjected to biaxial loading, Int. J. Fract., 9, pp. 149–56. [19] Goldman, N.L., Hutchinson, J.W. (1975). Fully plastic crack problems: the center cracked strip under plane strain, Int. J. Solids Struct., 11, pp. 575–591. [20] Lee, J.D., Liebowitz, H. (1977). The nonlinear and biaxial effects on energy release rate, J-integral and stress intensity factor, Eng. Fract. Mech., 9, pp. 765–779, DOI: https://doi.org/10.1016/0013-7944(77)90002-9. [21] Shlyannikov, V.N., Tumanov, A.V., Zakharov, A.P., Gerasimenko, A.A. (2016). Surface flaws behavior under tension, bending and biaxial cyclic loading, Int. J. Fatigue, 92, pp. 557–576, DOI: https://doi.org/10.1016/j.ijfatigue.2016.05.003. [22] Shlyannikov, V.N., Zakharov, A.P. (2017). Generalization of mixed mode crack behaviour by the plastic stress intensity factor, Theor. Appl. Fract. Mech., 91, pp. 52–65, DOI: https://doi.org/10.1016/j.tafmec.2017.03.014. [23] Shlyannikov, V.N., Boychenko, N. V., Tumanov, A.V., Fernandes-Canteli, A. (2014). The Elastic and Plastic Constraint Parameters for Three-Dimensional Problems, Eng. Fract. Mech., 127, pp. 83–96, DOI: https://doi.org/ 10.1016/j.engfracmech.2014.05.015. [24] Brown, M.W., Miller, K.J. (1979). Initiation and growth of cracks in biaxial fatigue, Fatigue Fract. Eng. Mater. Struct., 1, pp. 231–246, DOI: https://doi.org/10.1111/j.1460-2695.1979.tb00380.x.

273