Issue 78

A. P. Soldatenkov et alii, Fracture and Structural Integrity, 78 (2026) 248-259; DOI: 10.3221/IGF-ESIS.78.15

A CKNOWLEDGEMENTS

T

he work was performed according to the Government research assignment for the ISPMS SB RAS (Project FWRW 2026-0005 and Project FWRW-2026-0008).

R EFERENCES

[1] Ilyin, A.A., Kolachev, B.A., Polkin, I.S. (2009). Titanium alloys. Composition, structure, properties: Handbook. – Moscow, VILS-MATI. (in Russian) [2] Moiseyev, V. (2005). Titanium Alloys. Russian Aircraft and Aerospace Applications. New York, CRC Press. [3] Boyer, R.R. (1996). An overview on the use of titanium in the aerospace industry. Mat Sci Eng A.; 213 (1-2), pp. 103– 114. DOI: https://doi.org/10.1016/0921-5093(96)10233-1. [4] Williams, J.C., Starke, Jr. E.A. (2003). Progress in Structural Materials for Aerospace Systems. Acta Mater., 51, pp. 5775– 5799. DOI: https://doi.org/10.1016/j.actamat.2003.08.023. [5] Boyer, R.R., Briggs, R.D. (2005). The Use of β Titanium Alloys in the Aerospace Industry. J Mat Eng Perf., 14, pp. 681– 685. DOI: https://doi.org/10.1361/105994905x75448. [6] Mouritz, A.P. (2012). Introduction to Aerospace Materials, Woodhead, Publishing in Materials, DOI: https://doi.org/10.1533/9780857095152 [7] Peters, M., Leyens, C. (2003). Titanium and Titanium Alloys: Fundamentals and Applications. Wiley-VCH, Weinkeim, Germany. [8] Ivasishin, O.M., Markovsky, P.E., Semiatin, S.L., Ward, C.H., (2005). Aging response of coarse- and fine-grained β titanium alloys. Mater. Sci. Eng. A, 405, pp. 296–305. DOI: https://doi.org/10.1016/j.msea.2005.06.027. [9] Teixeira, J.D.-C., Appolaire, B., Aeby-Gautier, E., Denis, S., Bruneseaux, F., (2006). Modeling of the effect of the β phase deformation on the α phase precipitation in near- β titanium alloys. Acta Mat., 54, pp. 4261–4271. DOI: https://doi.org/10.1016/j.actamat.2006.05.019. [10] Shanyavskiy, A.A., Soldatenkov, A.P. (2022). Metallic materials fatigue behavior: Scale levels and ranges of transition between them. Int J Fat., 158, p. 106773. DOI: https://doi.org/10.1016/j.ijfatigue.2022.106773. [11] Wu, G.Q., Shi, C.L., Sha, W., Sha, A.X., Jiang, H.R. (2013). Microstructure and high cycle fatigue fracture surface of a Ti–5Al–5Mo–5V–1Cr–1Fe titanium alloy. Mat Sci Eng A., 575, pp. 111–118. DOI: https://doi.org/10.1016/j.msea.2013.03.047. [12] Shi, X., Zeng, W., Xue, S., Jia, Z. (2015). The crack initiation behavior and the fatigue limit of Ti–5Al–5Mo–5V–1Cr– 1Fe titanium alloy with basket-weave microstructure. J Al Com., 631, pp. 340–349. DOI: https://doi.org/10.1016/j.jallcom.2015.01.077. [13] Naydenkin, E.V., Mishin, I.P., Ratochka, I.V., Oborin, V.A., Bannikov, M.V., Bilalov, D.A., Naydenkin, K.E. (2021). Fatigue and fracture behavior of ultrafine-grained near β titanium alloy produced by radial shear rolling and subsequent aging. Mat Sci Eng A., 810, p. 40968. DOI: https://doi.org/10.1016/j.msea.2021.140968. [14] Sheremetyev, V., Kudryashova, A., Dubinskiy, S., Galkin, S., Prokoshkin, S., Brailovski, V. (2018). Structure and functional properties of metastable beta Ti-18Zr-14Nb (at.%) alloy for biomedical applications subjected to radial shear rolling and thermomechanical treatment. J. All. Com., 737, pp. 678-683. DOI: https://doi.org/10.1016/j.jallcom.2017.12.119. [15] Soldatenkov, A.P., Naydenkin, E.V., Shanyavsky, A.A., Mishin, I.P., Eremin, A.V., Bogdanov, A.A., Panin, S.V. (2022). A Mesoscale Study of Fatigue Fracture of Near β Titanium Alloy VT22 after Radial Shear Rolling with Subsequent Aging. Phys Mesom., 25(6), pp. 537–548. DOI: https://doi.org/10.1134/S1029959922060066. [16] Naydenkin, E.V., Mishin, I.P., Oborin, V.A., Manisheva, A.I. (2025). The alpha-case formation effect on very high cycle fatigue and fracture of ultrafine-grained near β titanium alloy. Fat Fra Eng Mat Struc., 48(8), pp. 3465-3474. DOI: https://doi.org/10.1111/ffe.14681. [17] Gaddam, R. Antti, M.L., Pederson R. (2014). Influence of alpha-case layer on the low cycle fatigue properties of Ti– 6Al–2Sn–4Zr–2Mo alloy, Mater. Sci. Eng. A. 599, pp. 51–56. DOI: https://doi.org/10.1016/j.msea.2014.01.059. [18] Kalienko, M., Zhelnina, A., Popov, A., Volkov, A. (2026). Influence of the TiO 2 oxide layer phase composition on the fatigue behavior of heat-resistant titanium alloys. Fat Fra Eng Mat Struc, p. 70287. DOI: https://doi.org/10.1111/ffe.70287.

258