Issue 78

G. Palomba et alii, Fracture and Structural Integrity, 78 (2026) 233-247; DOI: 10.3221/IGF-ESIS.78.14

[3] Kim, J.J., Pham, T.H., Kim, S.E. (2015). Instrumented indentation testing and FE analysis for investigation of mechanical properties in structural steel weld zone, Int. J. Mech. Sci., 103, pp. 265–274. DOI: https://doi.org/10.1016/J.IJMECSCI.2015.09.015. [4] D’Andrea, D., Risitano, G., Corigliano, P., D’Andrea, D. (2025). Fatigue Strength Determination of AISI 316L Steel and Welded Specimens Using Energy Methods., AIAS 2024, Basel Switzerland, MDPI, p. 31. [5] Susmel, L., Taylor, D. (2012). Estimating macro-, micro-, and nano-hardness of metallic materials from elasto-plastic finite element results, Frattura Ed Integrita Strutturale, 19, pp. 37–50. DOI: https://doi.org/10.3221/IGF-ESIS.19.04. [6] Corigliano, P., Crupi, V., Guglielmino, E., Fricke, W. (2014). FE analysis of cruciform welded joints considering different mechanical properties for base material, Heat affected zone and weld metal, Frattura Ed Integrita Strutturale, 30. DOI: https://doi.org/10.3221/IGF-ESIS.30.37. [7] Corigliano, P. (2022). On the Compression Instability during Static and Low-Cycle Fatigue Loadings of AA 5083 Welded Joints: Full-Field and Numerical Analyses, Journal of Marine Science and Engineering, 10, p. 212. DOI: https://doi.org/10.3390/JMSE10020212. [8] Dong, Y., Ai, Z., Garbatov, Y. (2025). Fatigue life assessment of fillet welded joint using the local strain approach accounting for microscale notch effect, Ocean Engineering, 326, p. 120808. DOI: https://doi.org/10.1016/J.OCEANENG.2025.120808. [9] Lopez, Z., Fatemi, A. (2012). A method of predicting cyclic stress-strain curve from tensile properties for steels, Materials Science and Engineering A, 556, pp. 540–550. DOI: https://doi.org/10.1016/j.msea.2012.07.024. [10] Kamaya, M. (2016). Ramberg–Osgood type stress–strain curve estimation using yield and ultimate strengths for failure assessments, International Journal of Pressure Vessels and Piping, 137, pp. 1–12. DOI: https://doi.org/10.1016/j.ijpvp.2015.04.001. [11] Xue, H., Wang, Z., Wang, S., He, J., Yang, H. (2021). Characterization of Mechanical Heterogeneity in Dissimilar Metal Welded Joints, Materials, 14(15), p. 4145. DOI: https://doi.org/10.3390/MA14154145. [12] Wang, S., Zhang, H., Ju, Z., Li, B., Chen, F., Han, F. (2023). Effect of Inhomogeneous Mechanical Properties on the Stress-Strain Field at the Crack Tip and Crack Growth Direction in Dissimilar Metal Welded Joints. DOI: https://doi.org/10.1155/2023/6408667. [13] Miller, J.R., Mckeown, P.J., Qiu, H., Clyne, T.W. (2025). Profilometry-Based Indentation Plastometry Testing of Tungsten at High Temperature. DOI: https://doi.org/10.1002/adem.202500292. [14] Takakuwa, O., Kawaragi, Y., Soyama, H., Takakuwa, O., Kawaragi, Y., Soyama, H. (2013). Estimation of the Yield Stress of Stainless Steel from the Vickers Hardness Taking Account of the Residual Stress, J. Surf. Eng. Mater. Adv. Technol., 3(4), pp. 262–268. DOI: https://doi.org/10.4236/JSEMAT.2013.34035. [15] Mazánová, V., Polák, J., Škorík, V., Kruml, T. (2017). Multiaxial elastoplastic cyclic loading of austenitic 316L steel, Frattura Ed Integrita Strutturale, 11(40), pp. 162–169. DOI: https://doi.org/10.3221/IGF-ESIS.40.14. [16] Pan, B., Qian, K., Xie, H., Asundi, A. (2009). Two-dimensional digital image correlation for in-plane displacement and strain measurement: A review, Meas. Sci. Technol., 20(6). DOI: https://doi.org/10.1088/0957-0233/20/6/062001. [17] Sutton, M.A., Orteu, J.J., Schreier, H. (2009). Image correlation for shape, motion and deformation measurements: basic concepts, theory and applications, Springer Science & Business Media. [18] Fricke, W. (2003). Fatigue analysis of welded joints: state of development, 16. [19] Dao, M., Chollacoop, N., Van Vliet, K.J., Venkatesh, T.A., Suresh, S. (2001). Computational Modeling Of The Forward And Reverse Problems In Instrumented Sharp Indentation, 49. [20] Hertelé, S., De Waele, W., Denys, R. (2011). A generic stress-strain model for metallic materials with two-stage strain hardening behaviour, Int. J. Non. Linear. Mech., 46(3), pp. 519–531. DOI: https://doi.org/10.1016/j.ijnonlinmec.2010.12.004. [21] Olufsen, S.N., Andersen, M.E., Fagerholt, E. (2020). μ DIC: An open-source toolkit for digital image correlation, SoftwareX, 11. DOI: https://doi.org/10.1016/j.softx.2019.100391. [22] Remes, H., Varsta, P., Romanoff, J. (2012). Continuum approach to fatigue crack initiation and propagation in welded steel joints, Int. J. Fatigue, 40, pp. 16–26. DOI: https://doi.org/10.1016/j.ijfatigue.2012.01.007.

247