Issue 78

A. Sancak et alii, Fracture and Structural Integrity, 78 (2026) 186-206; DOI: 10.3221/IGF-ESIS.78.11

[19] Liu, D., Liu, J., Wu, S. and Huang, F. (2022). Corrosion fatigue-cracking behaviors of low alloy steels in seawater for offshore engineering structures, Metallurgical and Materials Transactions A, 53, pp. 2369–2382. DOI: https://doi.org/10.1007/s11661-022-06693-3 [20] Han, Z.-Y. and Huang, X.-G. (2019). Stress corrosion behavior of X80 pipeline steel in natural seawater with different dissolved oxygen contents, Fracture and Structural Integrity, 50, pp. 20–28. DOI: https://doi.org/10.3221/IGF ESIS.50.03 [21] Baragetti, S. and Villa, F. (2014). SCC and corrosion fatigue characterization of a Ti-6Al-4V alloy in a corrosive environment – experiments and numerical models, Fracture and Structural Integrity, 8(30), pp. 84–94. DOI: https://doi.org/10.3221/IGF-ESIS.30.12 [22] Jorge, J.C., Faragasso, S.M., Guimarães de Souza, L.F. and de Souza Bott, I. (2015). Effect of post-welding heat treatment on the mechanical and microstructural properties of extra-high-strength steel weld metals, for application on mooring equipment, Welding International, 29(7), pp. 521–529. DOI: https://doi.org/10.1080/09507116.2014.932984 [23] Monteiro, J.L.D., Junior, A.L.S., Jorge, J.C.F., de Souza, L.F.G. and Bott, I.S. (2015). Influence of preheat and post welding heat treatment on the microstructure and mechanical properties of high strength steel weld metal for application in mooring components, 23rd ABCM International Congress of Mechanical Engineering. DOI: https://doi.org/10.20906/cps/cob-2015-0289 [24] Jorge, J.C.F., Souza, L.F.G., Couto, J.L.S. and Bott, I.S. (2016). Influence of chemical composition on the mechanical properties of high strength steel weld metals for application in mooring components, International Journal of Engineering and Technical Research, 4(2). [25] Jorge, J.C.F., Santos Filho, A.M.F., Diniz, J.L.C., Souza, L.F.G. and Mendes, M.C. (2022). Evaluation of high strength cast steel welded joints suitable to mooring components, Soldagem & Inspeção, 27, e2720. DOI: https://doi.org/10.1590/0104-9224/SI27.20 [26] Buzzatti, D.T., Chludzinki, M., Santos, R.E., Buzzatti, J.T., Lemos, G.V., Mattei, F., Marinho, R.R., Paes, M.T. and Reguly, A. (2019). Toughness properties of a friction hydro pillar processed offshore mooring chain steel, Journal of Materials Research and Technology, 8(3), pp. 2625–2637. DOI: https://doi.org/10.1016/j.jmrt.2019.04.002 [27] Oikonomidis, F., Bastid, P. and dos Santos, M.F. (2019). Effect of seawater environment on the fracture toughness of mooring chain link material under cathodic protection, Procedia Structural Integrity, 18, pp. 142–162. DOI: https://doi.org/10.1016/j.prostr.2019.08.149 [28] Vargas-Arista, B., Hallen, J.M., Albiter, A. and Ángeles-Chávez, C. (2010). Degradation of impact fracture during accelerated ageing of weld metal on microalloyed steel, Welding International, 24(4), pp. 315–320. DOI: https://doi.org/10.1080/09507110903568760 [29] Srdan, B., Vujadic, A., Ljubica, M. and Bojana, Z. (2021). An analysis of impact testing of high strength low-alloy steels used in ship construction, Brodogradnja, 72(3). DOI: https://doi.org/10.21278/brod72301 [30] Al Khazali, M.S., Seitl, S., Malíková, L., K ř ivý, V. and Vacek, M. (2026). Effect of corrosion damage on the fatigue behavior of S460NL high-strength steel under cyclic loading, Fracture and Structural Integrity, 20(77), pp. 56–70. DOI: https://doi.org/10.3221/IGF-ESIS.77.05 [31] ASTM International. (2021). ASTM E415-21: Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry, ASTM International, West Conshohocken, PA. [32] International Organization for Standardization. (2016). ISO 148-1:2016 Metallic materials — Charpy pendulum impact test — Part 1: Test method, International Organization for Standardization, Geneva, Switzerland. [33] ASTM International. (2021). ASTM D1141-98(2021): Standard Practice for the Preparation of Substitute Ocean Water, ASTM International, West Conshohocken, PA. [34] ASTM International. (2021). ASTM G31-21: Standard Guide for Laboratory Immersion Corrosion Testing of Metals, ASTM International, West Conshohocken, PA.

206