Issue 78

C. S. Karadumpa et alii, Fracture and Structural Integrity, 78 (2026) 146-167; DOI: 10.3221/IGF-ESIS.78.09

[13] Qian, J., Zhou, L.Q., Wang, X., Yang, J.P. (2023). Degradation of mechanical properties of graphene oxide concrete under sulfate attack and freeze–thaw cycle. Materials 16(21), 6949. DOI: https://doi.org/10.3390/ma16216949. [14] Danoglidis, P.A., Konsta-Gdoutos, M.S., Gdoutos, E.E. (2019). Improved post-crack energy absorption capability of cementitious composites reinforced with CNTs and PPs. In: Proceedings of ICTAEM 2019. Springer, Cham, pp. 54– 58. DOI: https://doi.org/10.1007/978-3-030-21894-2_11. [15] Zhang, P., Han, S., Golewski, G.L., Wang, X. (2020). Nanoparticle-reinforced building materials with applications in civil engineering. Advances in Mechanical Engineering 12(10), pp. 1–4. DOI: https://doi.org/10.1177/1687814020965438. [16] Ahmed, A. (2024). Assessing the effects of supplementary cementitious materials on concrete properties: a review. Discover Civil Engineering. DOI: https://doi.org/10.1007/s44290-024-00154-z. [17] Singh, R. B., Debbarma, S., Kumar, N., & Singh, S. (2021). Hardened state behaviour of self-compacting concrete pavement mixes containing alternative aggregates and secondary binders. Construction and Building Materials , 266 , 120624. [18] Bhojaraju, C., Mousavi, S.S., Brial, V., (2021). Fresh and hardened properties of GGBS-contained cementitious composites using graphene and graphene oxide. Construction and Building Materials 300, 123902. DOI: https://doi.org/10.1016/j.conbuildmat.2021.123902. [19] Li, X., Liu, Y.M., Li, W.G. (2017). Effects of graphene oxide agglomerates on workability, hydration, microstructure and compressive strength of cement paste. Construction and Building Materials 145, pp. 402–410. DOI: https://doi.org/10.1016/j.conbuildmat.2017.04.058. [20] Huang, J., Rodrigue, D., Guo, P. (2021). Effect of multi-wall carbon nanotubes on the flexural performance of cement based composites. Archives of Civil and Mechanical Engineering 21, 80. DOI: https://doi.org/10.1007/s43452-021-00229-z. [21] Ladeira, L.O. (2020). Early-age behavior of blast-furnace slag cement pastes produced with carbon nanotubes grown directly on clinker. Revista IBRACON de Estruturas e Materiais. DOI: https://doi.org/10.1590/S1983-41952020000300010. [22] Du, Y., Yang, J., Thomas, B.S. (2020). Hybrid graphene oxide/carbon nanotubes reinforced cement paste: An investigation on hybrid ratio. Construction and Building Materials 261, 119815. DOI: https://doi.org/10.1016/j.conbuildmat.2020.119815.. [23] Fan, J., Deng, S., Li, G., Li, J., Zhang, J. (2024). Synergistic effect of carbon nanotubes and polyvinyl alcohol on the mechanical performance and microstructure of cement mortar. Nanotechnology Reviews 13(1). DOI: https://doi.org/10.1515/ntrev-2024-0028. [24] Torres, A., Brandt, J., Lear, K., Liu, J. (2017). A looming tragedy of the sand commons. Science 357(6355), pp. 970– 971. DOI: https://doi.org/10.1126/science.aao0503. [25] Bureau of Indian Standards. (2015). IS 16415: 2015, Composite cement — Specification. New Delhi: BIS. [26] Bureau of Indian Standards. (2019). IS 10262:2019, Concrete mix proportioning — Guidelines. New Delhi: BIS. [27] Bureau of Indian Standards. (2018). IS 1199 (Part 1):2018, Fresh Concrete — Methods of Sampling, Testing and Analysis. New Delhi: BIS. [28] Bureau of Indian Standards. (2021). IS 516 (Part 1):2021, Hardened Concrete — Methods of Test. New Delhi: BIS. [29] Mehta, P.K., Monteiro, P.J.M. (2014). Concrete: Microstructure, Properties, and Materials, 4th ed. McGraw-Hill Education.

167