Issue 78

N. Mohan et alii, Frattura ed Integrità Strutturale, 78 (2026) 129-145; DOI: 10.3221/IGF-ESIS.78.08

A CKNOWLEDGEMENTS

T

he author’s express their sincere gratitude to BMS College of Engineering - Bangalore, QIP program of AICTE & IIT-Roorkee and Sri Siddhartha Academy of Higher Education, Tumkur, Karnataka, India, for their continuous support in completing this research work.

R EFERENCES

[1] Kishor, B., Chaudhari, G. P. and Nath, S. K. (2018). Slurry erosion behaviour of thermo-mechanically treated 16Cr5Ni stainless steel, Tribology International, 119, pp. 411-418, DOI: https://doi.org/10.1016/j.triboint.2017.11.025 [2] Muñoz-Cubillos, J., Zambrano, O.A., Coronado, J. J. and Rodríguez, S. A. (2024). Comparing the Cavitation and Slurry Erosion Wear Resistance of 16Cr5Ni Stainless Steel With 13Cr4Ni CA6NM Stainless Steel, Journal of Tribology, 147, DOI: https://doi.org/10.1115/1.4066321. [3] Kishor, B., Chaudhari, G. P. and Nath, S. K. (2016). Slurry erosion of thermo-mechanically processed 13Cr4Ni stainless steel, Tribology International, 93, pp. 50-57. DOI: https://doi.org/10.1016/j.triboint.2015.08.048. [4] Moreno, D. A., Ibars, J. R., Polo, J. L., and Bastidas J. M. (2014), EIS monitoring study of the early microbiologically influenced corrosion of AISI 304L stainless steel condenser tubes in freshwater, J Solid State Electrochem., 18, pp. 377-388. DOI: https://doi.org/10.1007/s10008-014-2390-6. [5] Alkan, S., Gunen, A., Gulen, M. and Gok, M.S. (2024). Effect of boriding on tribocorrosion behaviour of HSLA offshore mooring chain steel, Surface and Coatings Technology 476 (2024) 130276. DOI: https://doi.org/10.1016/j.surfcoat.2023.130276. [6] Mohan, N. and Chaudhari, G. P. (2022). Microstructural evolution and mechanical behaviour of boronized martensitic stainless steels, Surface Engineering, 38, pp. 552-561. DOI: https://doi.org/10.1080/02670844.2022.2113612. [7] Gunen, A., Gurol, U., Kocak, M., and Çam, G. (2023). A new approach to improve some properties of wire arc additively manufactured stainless steel components: Simultaneous homogenization and boriding, Surface and Coatings Technology, 460, DOI: https://doi.org/10.1016/j.surfcoat.2023.129395. [8] Keddam, M., and Jurci, P. (2021). Simulating the Growth of Dual-Phase Boride Layer on AISI M2 Steel by Two Kinetic Approaches, Coatings, 11(433), DOI: https://doi.org/10.3390/coatings11040433. [9] Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, S. Dal, S. and Erdogan, A. (2022). Powder pack boronizing of CoCrFeNiAl0.5Nb0.5 HEA: Modeling of kinetics, microstructural, mechanical, and tribological characterizations, Journal of Alloys and Compounds, 929, 167310. DOI: https://doi.org/10.3390/coatings11040433. [10] Cetin, M., Gunen, A., Kalkandelen, M., and Karakas, M. S. (2021). Microstructural, wear and corrosion characteristics of boronized AISI 904L superaustenitic stainless steel, Vacuum, 187, 110145, DOI: https://doi.org/10.1016/j.vacuum.2021.110145. [11] Campos-Silva, I., Palomar-Pardave, M., Perez Pasten-Borja, R., Kahvecioglu Feridun, O., Bravo-Barcenas, D., Lopez-García, C., and Reyes-Helguera, R. (2018). Tribocorrosion and cytotoxicity of FeB-Fe2B layers on AISI 316 L steel, Surface and Coatings Technology, 349, pp. 986-997. DOI: https://doi.org/10.1016/j.surfcoat.2018.05.085 [12] Costa Aichholz, S. A., Sostag Meruvia, M., Soares Júnior, P. C., and Torres, R. D. (2018). Tribocorrosion behavior of boronized AISI 4140 steel, Surface and Coatings Technology, 352, pp. 265-272. DOI: https://doi.org/10.1016/j.surfcoat.2018.07.101. [13] García-Leon, R.A., Martínez-Trinidad, J., Palomar-Pardave, M., Lartundo-Rojas, L., Guevara-Morales, A., Martínez Gutierrez, H. (2024). Tribochemical products on borided AISI 316L steel exposed to Hank’s solution, Wear, pp. 538-539, DOI: https://doi.org/10.1016/j.wear.2023.205209. [14] Arteaga-Hernandez, L. A., Cuao-Moreu, C. A., Gonzalez-Rivera, C. E., Alvarez-Vera, M., Ortega-Saenz, J. A., and Hernandez-Rodriguez, M. A. L. (2021). Study of boriding surface treatment in the tribological behavior of an AISI 316L stainless steel, Wear, 477, DOI: https://doi.org/10.1016/j.wear.2021.203825. [15] Mohan., Kumar. and Chaudhari. (2024). Effect of Boronizing on the Corrosion Resistance of Martensitic Stainless Steels, J. of Material Engg and Perform, DOI: https://doi.org/10.1007/s11665-024-10188-0.

144