PSI - Issue 79

Déborah de Oliveira et al. / Procedia Structural Integrity 79 (2026) 248–258

258

Novelino, A.L.B., Carvalho, G.C., Ziberov, M., 2022. Influence of WAAM-CMT deposition parameters on wall geometry. Advances in Industrial and Manufacturing Engineering 5. https://doi.org/10.1016/j.aime.2022.100105 Prado-Cerqueira, J.L., Diéguez, J.L., Camacho, A.M., 2017. Preliminary development of a Wire and Arc Additive Manufacturing system (WAAM). Procedia Manuf 13, 895–902. https://doi.org/10.1016/j.promfg.2017.09.154 Sales, A., Kotousov, A., Yin, L., 2021. Design against fatigue of super duplex stainless steel structures fabricated by wire arc additive manufacturing process. Metals (Basel) 11. https://doi.org/10.3390/met11121965 Tomilin, M., Meyer, J., 2011. Topology optimization of an additive layer manufactured (alm) aerospace part, in: Proceeding of the 7th Altair CAE Technology Conference. pp. 1–9. Vieira, R.D.A. de M., Liskevych, O., de Oliveira, D., Ziberov, M., 2024. Influence of parameter variation and interlayer temperature control in wall angle, curvature and measurement methodology of ER70S-6 parts obtained by WAAM. Manuf Lett 42, 40–45. https://doi.org/10.1016/j.mfglet.2024.10.006 Wang, X., Zhao, Y., Wei, L., Guan, X., 2021. In-Situ SEM Investigation of the Fatigue Behavior of Additive Manufactured Titanium Alloys. pp. 612–621. https://doi.org/10.1007/978-3-030-64908-1_57 Williams, S.W., Martina, F., Addison, A.C., Ding, J., Pardal, G., Colegrove, P., 2016. Wire + Arc Additive Manufacturing. Materials Science and Technology 32, 641–647. https://doi.org/10.1179/1743284715Y.0000000073 Xiong, J., Zhang, G., 2014. Adaptive control of deposited height in GMAW-based layer additive manufacturing. J Mater Process Technol 214, 962– 968. https://doi.org/10.1016/j.jmatprotec.2013.11.014 Xiong, J., Zhang, G., Zhang, W., 2015. Forming appearance analysis in multi-layer single-pass GMAW-based additive manufacturing. The International Journal of Advanced Manufacturing Technology 80, 1767–1776. https://doi.org/10.1007/s00170-015-7112-4 Zhai, W., Wu, N., Zhou, W., 2022. Effect of Interpass Temperature on Wire Arc Additive Manufacturing Using High-Strength Metal-Cored Wire. Metals (Basel) 12. https://doi.org/10.3390/met12020212 Zhang, C., Li, Y., Gao, M., Zeng, X., 2018. Wire arc additive manufacturing of Al-6Mg alloy using variable polarity cold metal transfer arc as power source. Materials Science and Engineering: A 711, 415–423. https://doi.org/10.1016/j.msea.2017.11.084