PSI - Issue 79

Déborah de Oliveira et al. / Procedia Structural Integrity 79 (2026) 248–258

257

References Araujo, L.C., de Almeida Ferreira, J.L., Ziberov, M., Araújo, J.A., 2023. Assessing Fatigue in Materials with Small Defects: A New Multiaxial Model Based on Principal Stress Amplitudes, in: Procedia Structural Integrity. Elsevier B.V., pp. 144–151. https://doi.org/10.1016/j.prostr.2024.03.017 Araujo, L.C., Malcher, L., de Oliveira, D., Araújo, J.A., 2024. A new multiaxial fatigue endurance model for high strength steels taking into account the presence of small defects. Int J Fatigue 178. https://doi.org/10.1016/j.ijfatigue.2023.107981 ASTM, 2014. Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials. Ayan, Y., Kahraman, N., 2022. Bending fatigue properties of structural steel fabricated through wire arc additive manufacturing (WAAM). Engineering Science and Technology, an International Journal 35. https://doi.org/10.1016/j.jestch.2022.101247 Barroqueiro, B., Andrade-Campos, A., Valente, R.A.F., Neto, V., 2019. Metal additive manufacturing cycle in aerospace industry: A comprehensive review. Journal of Manufacturing and Materials Processing. https://doi.org/10.3390/jmmp3030052 Bhavar, V., Kattire, P., Khot, S., 2014. A review on powder bed fusion technology of metal additive manufacturing. Biswal, R., Zhang, X., Syed, A.K., Awd, M., Ding, J., Walther, F., Williams, S., 2019. Criticality of porosity defects on the fatigue performance of wire+arc additive manufactured titanium alloy. Int J Fatigue 122, 208–217. https://doi.org/10.1016/j.ijfatigue.2019.01.017 Böhler, 2022. Solid Wire, mild steel [WWW Document]. Da Costa, A.L.S., Lima De Paiva, R., De Oliveira, D., Ziberov, M., 2025. Influence of Interlayer Temperature and Deposition Method on the Wall Geometry and Vickers Microhardness Profile of ER70S-6 Parts Manufactured by Additive Manufacturing Using CMT. https://doi.org/10.3390/jmmp9030093 da Silva, C.P., Silva, G.P., Santos, M.C., Ziberov, M., Malcher, L., 2024. Hybrid search methodology for mechanical characterization of material produced via WAAM assuming Gurson porous material. Journal of the Brazilian Society of Mechanical Sciences and Engineering 46. https://doi.org/10.1007/s40430-024-04828-8 Dawn, W., 2003. Ultrasonic object consolidation. 6519500B1. de Araújo Soares, M.A., Novelino, A.L.B., Ziberov, M., 2024. Geometry Study on 410NiMo Alloy Parts Printed by WAAM-CMT. pp. 114–125. https://doi.org/10.1007/978-3-031-43555-3_11 DebRoy, T., Wei, H.L., Zuback, J.S., Mukherjee, T., Elmer, J.W., Milewski, J.O., Beese, A.M., Wilson-Heid, A., De, A., Zhang, W., 2018. Additive manufacturing of metallic components – Process, structure and properties. Prog Mater Sci. https://doi.org/10.1016/j.pmatsci.2017.10.001 Dilip, J.J.S., Janaki Ram, G.D., 2013. Microstructures and Properties of Friction Freeform Fabricated Borated Stainless Steel. J Mater Eng Perform 22, 3034–3042. https://doi.org/10.1007/s11665-013-0605-0 Dirisu, P., Supriyo, G., Martina, F., Xu, X., Williams, S., 2020. Wire plus arc additive manufactured functional steel surfaces enhanced by rolling. Int J Fatigue 130. https://doi.org/10.1016/j.ijfatigue.2019.105237 Ermakova, A., Ganguly, S., Razavi, N., Berto, F., Mehmanparast, A., 2022. Experimental investigation of the fatigue crack growth behavior in wire arc additively manufactured ER100S-1 steel specimens. Fatigue Fract Eng Mater Struct 45, 371–385. https://doi.org/10.1111/ffe.13598 Ermakova, A., Razavi, N., Berto, F., Mehmanparast, A., 2023. Uniaxial and multiaxial fatigue behaviour of wire arc additively manufactured ER70S-6 low carbon steel components. Int J Fatigue 166. https://doi.org/10.1016/j.ijfatigue.2022.107283 Fang, X., Zhang, L., Chen, G., Dang, X., Huang, K., Wang, L., Lu, B., 2018. Correlations between Microstructure Characteristics and Mechanical Properties in 5183 Aluminium Alloy Fabricated by Wire-Arc Additive Manufacturing with Different Arc Modes. Materials 11, 2075. https://doi.org/10.3390/ma11112075 Furukawa, K., 2006. New CMT arc welding process – welding of steel to aluminium dissimilar metals and welding of super-thin aluminium sheets. Welding International 20, 440–445. https://doi.org/10.1533/wint.2006.3598 Gisario, A., Kazarian, M., Martina, F., Mehrpouya, M., 2019. Metal additive manufacturing in the commercial aviation industry: A review. J Manuf Syst 53, 124–149. https://doi.org/10.1016/j.jmsy.2019.08.005 Hehr, A., Norfolk, M., 2019. A comprehensive review of ultrasonic additive manufacturing. Rapid Prototyp J 26, 445–458. https://doi.org/10.1108/RPJ-03-2019-0056 Kumar, V., Mandal, A., Das, A.K., Kumar, S., n.d. Parametric study and characterization of wire arc additive manufactured steel structures. https://doi.org/10.1007/s00170-021-07261-6/Published Li, X., Han, Q., Zhang, G., 2021. Large-size sprocket repairing based on robotic GMAW additive manufacturing. Welding in the World 65, 793– 805. https://doi.org/10.1007/s40194-021-01080-9 MTS, 2021. Landmark Testing Solutions: Versatile, high-performance servohydraulic systems for static and dynamic material and component testing. MTS, 2016. Side-Loading Hydraulic Wedge Grips: Precision, easy-to-load grips for a wide range of tensile and fatigue applications.