PSI - Issue 78

Francesco Ascione et al. / Procedia Structural Integrity 78 (2026) 1334–1341

1341

Caso, F. J. De, Matta, F., & Nanni, A. (2012). Fiber reinforced cement-based composite system for concrete confinement. Construction and Building Materials , 32 , 55 – 65. CEN (European Committee for Standardization). (1996). EN 1996-1-1 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structuresr . CEN (European Committee for Standardization). (2000). EN 12190 - Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar . Cholostiakow, S., Koutas, L. N., & Papakonstantinou, C. G. (2023). Geopolymer versus cement-based textile-reinforced mortar: Diagonal compression tests on masonry walls representative of infills in RC frames. Construction and Building Materials , 373 (March), 130836. Constâncio Trindade, A. C., Alcamand, H. A., Ribeiro Borges, P. H., & De Andrade Silva, F. (2017). Influence of elevated temperatures on the mechanical behavior of jute-textile-reinforced geopolymers. Journal of Ceramic Science and Technology , 8 (3), 389 – 398. D’Antino, T., & Papanicolaou, C. (2017). Mechanical characterization of textile reinforced inorganic -matrix composites. Composites Part B , 127 , 78 – 91. Donnini, J., Mobili, A., Maracchini, G., Chiappini, G., Tittarelli, F., & Corinaldesi, V. (2024). A multi-performance comparison between lime, cementitious and alkali-activated TRM systems: Mechanical, environmental and energy perspectives. Construction and Building Materials , 440 (June), 137396. Gkournelos, P. D., Azdejković, L. D., & Triantafillou, T. C. (2022). Innovative and Eco -friendly Solutions for the Seismic Retrofitting of Natural Stone Masonry Walls with Textile Reinforced Mortar: In- and Out-of-Plane Behavior. Journal of Composites for Construction , 26 (1), 1 – 13. Libre, R. G. D., Leaño, J. L., Lopez, L. F., Cacanando, C. J. D., Promentilla, M. A. B., Guades, E. J., Garciano, L. E. O., & Ongpeng, J. M. C. (2023). In-Plane Shear Behavior of Unreinforced Masonry Wall Strengthened with Bamboo Fiber Textile-Reinforced Geopolymer Mortar. Buildings , 13 (2). Longo, F., Cascardi, A., Lassandro, P., & Aiello, M. A. (2020). A new Fabric Reinforced Geopolymer Mortar (FRGM) with mechanical and energy benefits. Fibers , 8 (8), 49. Nanni, A. (2012). FRCM strengthening - A new tool in the concrete and masonry repair toolbox. Concrete International , April , 2 – 9. NCR (National Research Council). (2018). CNR-DT 215 – Guide for the Design and Construction of Externally Bonded Fibre Reinforced Inorganic Matrix Systems for Strengthening Existing Structures. Provis, J. L. (2018). Alkali-activated materials. Cement and Concrete Research , 114 , 40 – 48. Tamburini, S., Natali, M., Garbin, E., Panizza, M., Favaro, M., & Valluzzi, M. R. (2017). Geopolymer matrix for fibre reinforced composites aimed at strengthening masonry structures. Construction and Building Materials , 141 , 542 – 552.