Issue 62

S.Bouhiyadi et alii, Frattura ed Integrità Strutturale, 62 (2022) 634-659; DOI: 10.3221/IGF-ESIS.62.44

[2] Kulshreshtha, Y., Mota, N., Jagadish, K., Breadboard, J., Vardon, P., van Loosdrecht, M. and Jonkers, H. (2020). The potential and current status of earthen material for low-cost housing in rural India, J. Construction and Building Materials, 247. DOI: 10.1016/j.conbuildmat.2020.118615. Pacheco-Torgal, F. and Jalali, S. (2012). Earth construction: Lessons from the past for future eco-efficient construction, J. Construction and Building Materials, 29, pp. 512-519. DOI: 10.1016/j.conbuildmat.2011.10.054. [3] Schroeder, H. (2016). Chapter 3: Earth Building Materials – Production, Requirements, and Testing, Sustainable Building with Earth, pp. 11-154, Springer International Publishing. [4] Egenti, C., Khatib, J.M. and Oloke, D. (2014), Conceptualisation and pilot study of shelled compressed earth block for sustainable housing in Nigeria, J. International Journal of Sustainable Built Environment, 3(1), pp 72–86. DOI: 10.1016/j.ijsbe.2014.05.002. [5] Giuffrida, G., Caponetto, R. and Cuomo1, M. (2019). An overview on contemporary rammed earth buildings: technological advances in production, construction, and material characterization. IOP Conference Series: Earth and Environmental Science, 296, SBE19 - Resilient Built Environment for Sustainable Mediterranean Countries, Milan, Italy. DOI: 10.1088/1755-1315/296/1/012018. [6] Winterkorn, H.F. and Pamukcu, S. (1991). Soil Stabilization and Grouting. In: Fang HY. (eds) Foundation Engineering Handbook. Springer, Boston, MA. DOI: 10.1007/978-1-4757-5271-7_9. [7] Uzoegbo, H. C. (2016). Dry-stack and compressed stabilised earth-block construction. J. Nonconventional and Vernacular Construction Materials, pp. 205–249. DOI: 10.1016/B978-0-08-100038-0.00008-1. [8] Islam, M. S., Elahi, T. E., Shahriar, A. R. and Mumtaz, N. (2020). Effectiveness of fly ash and cement for compressed stabilized earth block construction, J. Construction and Building Materials, 255. DOI: 10.1016/j.conbuildmat.2020.119392. [9] Ruiz, G., Zhang, X., Edris, W., Cañas, I. and Garijo, L. (2018). A comprehensive study of mechanical properties of compressed earth blocks, J. Construction and Building Materials, 176, pp. 566-572. DOI: 10.1016/j.conbuildmat.2018.05.077. [10] Guillaud, H., Joffry, T. oudul, P. and CRAterre-EAG. (1995). Manuel de conception et de construction « Blocs de terre comprimée », Deutsches Zentrum für Entwicklungstechnologien – GATE, ISBN 3-528-02082-2. [11] Guanqi, L., Yihong, W., Guiyuan, Z. and Jianxiong, Z. (2020), Compressive strength of earth block masonry: Estimation based on neural networks and adaptive network-based fuzzy inference system, J. Composite Structures, 235. DOI: 10.1016/j.compstruct.2019.111731. [12] Illampas, R., Ioannou, I. and Charmpis, D. C. (2011). A study of the mechanical behaviour of adobe masonry, J. Structural Repairs and Maintenance of Heritage Architecture XII, 118, pp 485 – 496. DOI: 10.2495/STR110401. [13] DS SIMULIA. (2022). ABAQUS, Version 6.6. [14] Venkatarama Reddy, B.V. (2012). 13 - Stabilised soil blocks for structural masonry in earth construction, J. Modern Earth Buildings, pp. 324-363. DOI: 10.1533/9780857096166.3.324. [15] Ben Mansour, M., Jelidi, A., Cherif, A. and Jabrallah, S. B. (2016). Optimizing thermal and mechanical performance of compressed earth blocks (CEB), J. Construction and Building Materials, 104, pp. 44-51. DOI: 10.1016/j.conbuildmat.2015.12.024. [16] Hashim, D.T., Hejazi F. and Lei, V.Y. (2020). Simplified Constitutive and Damage Plasticity Models for UHPFRC with Different Types of Fiber, J. International Journal of Concrete Structures and Materials. DOI: 10.1186/s40069-020-00418-9. [17] Grassl, P., Xenos, D., Nyström, U., Rempling, R. and Gylltoft, K.2013, CDPM2: A damage-plasticity approach to modelling the failure of concrete, J. International Journal of Solids and Structures, 50(24), pp. 3805-3816. DOI: 10.1016/j.ijsolstr.2013.07.008. [18] Birtel, V. and Mark P. (2006). Parameterised Finite Element Modelling of RC Beam Shear Rupture, ABAQUS Users’ Conference at Ruhr-University Bochum, Universitätsstr. 150, 44780 Bochum, Germany Institute for Reinforced and Prestressed Concrete Structures. [19] Terzaghi, K., Peck, R. B. and Mesri, G. (1996). Soil Mechanics in Engineering Practice, 3rd Edition ,John Wiley & Sons, INC. ISBN: 978-0-471-08658-1. [20] Hong, W. (2020). Chapter 3 - The investigation of the structural performance of the hybrid composite precast frames with mechanical joints based on nonlinear finite element analysis, Woodhead Publishing Series in Civil and Structural Engineering - Hybrid Composite Precast Systems, pp. 89-177. DOI: 10.1016/B978-0-08-102721-9.00003-0. [21] Dano, C., Hicher, P., Tailliez S. and Varjabédian, M. (2002). Identification des paramètres de comportement des sols injectés par analyse inverse d'essais pressiométriques, J. Revue Française de Génie Civil, pp. 631-660. DOI: 10.1080/12795119.2002.9692392.

658