PSI - Issue 59

6

Ivan Shatskyi et al. / Procedia Structural Integrity 59 (2024) 407–412 Shatskyi et al. / Structural Integrity Procedia 00 (0000) 000 – 000

412

4. Conclusions The developed calculation technique makes it possible to trace in an analytical form the influence of the mechanical and geometric characteristics of the composite layered coating on its stress state and limit equilibrium under local load distributed along a line. It is shown that the limiting state of a layered coating can be achieved not at the place of the maximum equivalent stress, but at the place of the minimum of the safety factor. References Ahmed, W. K., Mourad, A-H. I., 2013. Strengthening of misaligned welded pipes with outer circumferentially crack using FRP bandage finite element analysis. Journal of Mechanical Engineering and Technology 1, 2, 66 – 73, DOI: 10.18005/JMET0102005 Bembenek, M., Makoviichuk, M., Shatskyi, I., Ropyak, L., Pritula, I., Gryn, L., Belyakovskyi, V., 2022. Optical and mechanical properties of layered infrared interference filters. Sensors 22, 8105. DOI: 10.3390/s22218105. Dai, W., Li, C., He, D., Jia, D., Zhang, Y., Tan, Z., 2019. Mechanism of residual stress and surface roughness of substrate on fatigue behavior of micro-arc oxidation coated AA7075-T6 alloy. Surface and Coatings Technology, 380, 125014. DOI: 10.1016/j.surfcoat.2019.125014. Dutkiewicz, M., Dalyak, T., Shatskyi, I., Venhrynyuk, T., Velychkovych, A., 2021. Stress analysis in damaged pipeline with composite coating. Applied Sciences. 11, 22, 10676. DOI: 10.3390/app112210676. Gay, D., 2014. Composite materials: design and applications. 3rd ed. CRC Press, New York, 635 p. DOI: 10.1201/b17106. Klimenko, S. A., Podchernjaeva, I. A., Beresnev, V. M., Panashenko, V. M., Klimenko S. An., Kopeikina, M. Yu., 2014. AlN-(TiCr)B2 ion plasma coating for cutting tools of cBN-based polycrystalline superhard material. Journal of Superhard Materials, 36, 3, 208 – 216. DOI: 10.3103/S1063457614030095. Kopei, V. B., Onysko, O. R., Panchuk, V. G., 2020. Principles of development of product lifecycle management system for threaded connections based on the Python programming language. Journal of Physics: Conf. Series 1426, 1, 012033. DOI: 10.1088/1742-6596/1426/1/012033. Kukhar, V. V., Klimov, E. S., Chernenko, S. M., 2021. Analysis of galvanized steel sheets fabrication in cold rolling shop and identification of local impacts contributing to corrosion of metal-products. Solid State Phenom. 316, 873 – 879. DOI: 10.4028/www.scientific.net/SSP.316.873. Kusyi, Y., Stupnytskyy, V., Onysko, O., Dragašius, E., Baskutis, S., Chatys, R., 2022. Optimization synthesis of technologica l parameters during manufacturing of the parts. Eksploatacja i Niezawodność – Maintenance and Reliability 24, 4, 655 – 667. DOI: 10.17531/ein.2022.4.6. Lavrinenko, V. I., Lubnin, A. G., Tkach, V. M., Fesenko, I. P., Smokvyna, V. V., 2021. Features of the structural organization of a single-layer diamond-galvanic coating for the ruling tool. Journal of Superhard Materials 43, 2, 145 – 150. DOI: 10.3103/S1063457621020088. Liu, T.-J., 2021. Axisymmetric indentation response of functionally graded material coating. IntechOpen. https://doi.org/10.5772/intechopen.89312. Liu, Y., Yu, S.,Shi, Q., Ge, X., Wang, W., 2022. Multilayer coatings for tribology: a mini review. Nanomaterials 12, 9, 1388. DOI: 10.3390/nano12091388. Merlo, A., Léonard, G., 2021. Magnetron sputtering vs. electrodeposi tion for hard chrome coatings: a comparison of environmental and economic performances. Materials 14, 14, 3823. DOI: 10.3390/ma14143823. Milman, Yu. V., Galanov, B. A., Chugunova, S. I., 1993. Plasticity characteristic obtained through hardness. Measurement. Acta Metal. Mater. 41, 9, 2523 – 2532. Mohammadi, S., Yousefi, M., Khazaei, M., 2020. A review on composite patch repairs and the most important parameters affecting its efficiency and durability. Journal of Reinforced Plastics and Composites 40, 3, 3 – 15. DOI: 10.1177/0731684420941602. Protsenko, V. S., Bobrova, L. S., Korniy, S. A., Kityk, A. A., Danilov, F. I., 2018. Corrosion resistance and protective properties of chromium coatings electrodeposited from an electrolyte based on deep eutectic solvent. Func. Mater. 25, 3, 539 – 545. DOI: 10.15407/fm25.03.539. Prysyazhnyuk, P., Lutsak, D., Vasylyk, A., Shihab, T., Burda, M., 2015. Calculation of surface tension and its temperature dependence for liquid Cu-20Ni-20Mn alloy. Metallurgical and Mining Industry 7, 12, 346 – 350. Reddy, J. N., 2004. Mechanics of laminated composite plates and shells: theory and analysis. 2nd Ed. CRC Press, Boca Raton, 854 p. Ropyak, L., Shihab, T., Velychkovych, A., Bilinskyi, V., Malinin, V., Romaniv, M., 2023. Optimization of plasma electrolytic oxidation technological parameters of deformed aluminum alloy D16T in flowing electrolyte. Ceramics 6, 1, 146 – 167. DOI: 10.3390/ceramics6010010. Shatskii, I. P., 1989. Tension of a plate containing a rectilinear cut with hinged rims. J. Appl. Mech. Tech. Phys. 30, 828 – 830. DOI: 10.1007/BF00851435. Shatsky, I. P., 1988. Bending of plate weakened by the cut with contacting edges. Dopovidi Akademii Nauk Ukrainskoi RSR Ser. A – Fiziko matematichni ta technichni nauki 7, 49 – 51. Shatskyi, I. P., Makoviichuk, M. V., Shcherbii, A. B., 2020. Influence of flexible coating on the limit equilibrium of a spherical shell with meridional crack. Mater. Sci. 55, 484 – 491. DOI: 10.1007/s11003-020-00329-w. Shatskyi, I. P., Ropyak, L. Y. Makoviichuk, M. V., 2016. Strength optimization of a two-layer coating for the particular local loading conditions. Strength of Materials 48, 5, 726 – 730. DOI: 10.1007/s11223-016-9817-5. Tarelnyk, V. B., Paustovskii, A. V., Tkachenko, Y. G., Konoplianchenko, E. V., Martsynkovskyi, V. S., Antoszewski, B., 2017. Electrode materials for composite and multilayer electrospark-deposited coatings from Ni – Cr and WC – Co alloys and metals. Powder Metallurgy and Metal Ceramics 55, 9-10, 585 – 595. DOI: 10.1007/s11106-017-9843-2.