PSI - Issue 53

João Soeiro et al. / Procedia Structural Integrity 53 (2024) 367–375 Soeiro et al. / Structural Integrity Procedia 00 (2023) 000–000

375

9

References

Agarski, B., Budak, I., Micunovic, M. I., Vukelic, D. (2023). Life cycle assessment of injection moulding tools and multicomponent plastic cap production. Journal of Cleaner Production, 413, 137450. Geminger, T., Jarka, S. (2016). Injection molding of multimaterial systems. In Specialized injection molding techniques (pp. 165-210). William Andrew Publishing. Giusti, R. and Lucchetta, G. (2020). Modeling the adhesion bonding strength in injection overmolding of polypropylene parts. Polymers, 12(9), 2063. Gomes, M., Viana, J. C., Pontes, A. J. (2010). Hybrid injection moulding: Overmoulding of metal inserts with pp. Semana de Engenharia, 2010, 8. Goodship, V. (2017). Practical Guide to Injection Moulding 2nd Edition. Islam, A., Hansen, H. N., Bondo, M. (2010). Experimental investigation of the factors influencing the polymer–polymer bond strength during two-component injection moulding. The International Journal of Advanced Manufacturing Technology, 50, 101-111. Lall, P., Zhang, Y. (2022). Damage Progression in Electronic Molding Compounds under Sustained High Temperature for up to 1-year in Automotive Underhood Environments. In 2022 21st IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (iTherm) (pp. 1-8). IEEE. Lucchetta, G., Marinello, F., Bariani, P. F. (2011). Aluminum sheet surface roughness correlation with adhesion in polymer metal hybrid overmolding. CIRP annals, 60(1), 559-562. Szucha´cs, A., Ageyeva, T., Boros, R., Kova´cs, J. G. (2022). Bonding strength calculation in multicomponent plastic processing technologies. Materials and Manufacturing Processes, 37(2), 151-159. Rossa-Sierra, A., Sa´nchez-Soto, M., Illescas, S., Maspoch, M. L. (2009). Study of the interface behaviour between MABS / TPU bi-layer structures obtained through over moulding. Materials & Design, 30(10), 3979-3988. Vasconcelos, R. L., Oliveira, G. H., Amancio-Filho, S. T., Canto, L. B. (2023). Injection overmolding of polymer-metal hybrid structures: A review. Polymer Engineering & Science, 63(3), 691-722.