PSI - Issue 47

Rachid Bensaada et al. / Procedia Structural Integrity 47 (2023) 503–512 R. Bensaada et al. / Structural Integrity Procedia 00 (2019) 000 – 000

512 10

References

Alfonso, L., C. Badulescu, and N. Carrere. 2018. “Use of the Modified Arcan Fixture to Study the Strength of Bonded Assemblie s for Automotive Applications.” International Journal of Adhesion and Adhesives 80(November 2017): 104 – 14. Alfonso, L et al. 2015. “Determination of the 3D Failure Envelope of a Composite Based on a Modified Arcan Test Device.” Composite Structures 131: 585 – 93. https://www.sciencedirect.com/science/article/pii/S0263822315004936. Alil, LC, M Arrigoni, L Deleanu, and M Istrate. 2018. “A ssessment of Delamination in Tensylon R Uhmwpe Composites by Laser- Induced Shock.” Materiale Plastice 55(33). Arcan, M, Z Hashin, and A Voloshin. 1978. “A Method to Produce Uniform Plane -Stress States with Applications to Fiber- Reinforced Materials.” Experimental Mechanics 18(4): 141 – 46. https://doi.org/10.1007/BF02324146. ASTM C633. 2013. Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings . ASTM D5528/D5528M- 21. 2022. “Standard Test Method forMode I Interlaminar Fracture Tough ness of Unidirectional Fiber-Reinforced Polymer Matrix Composites.” https://www.astm.org/d5528_d5528m -21.ht ml. ASTM D6671/D6671M- 22. 2022. “Standard Test Method for Mixed Mode I -Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Pol ymer Matrix Composites.” https://www.astm.org/d6671_d6671m -22.ht ml. ASTM D7905/D7905M- 19e1. 2019. “Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness ofUnidirectional Fiber- Reinforced Polymer Matrix Composites.” https:// www.astm.org/d7905_d7905m-19e01.ht ml. Barbero, E J, F A Cosso, R Roman, and T L Weadon. 2013. “Determination of Material Parameters for Abaqus Progressive Damage A nalysis of E- Glass Epoxy Laminates.” Composites Part B: Engineering 46: 211 – 20. https://www.sciencedirect.com/science/article/pii/S1359836812006208. Bensaada, R., M. Almansba, R. Ferhoum, and Z. Sidhoum. 2018. “Ductile Fracture Study of Stainless Steel AISI 304L Thin Sheets Using the EWF Method and Cohesive Zone Modeling.” Journal of Failure Analysis and Prevention 18(5). Bensaada, R et al. 2023. “Towards Hybridization of Ultra -High Molecular Weight Polyethylene Composites by Thermally Sprayed Alumina: Feasibility and Bond Strength Assessment.” Materials & Design 227: 111779. https://www.sciencedirect.com/science/article/pii/S0264127523001946. Cognard, J- Y, P Davies, B Gineste, and L Sohier. 2005. “Development of an Improved Adhesive Test Method for Composite Assembly Design.” Composites Science and Technology 65(3): 359 – 68. https://www.sciencedirect.com/science/article/pii/S0266353804002131. Cognard, J- Y. 2008. “Numerical Analysis of Edge Effects in Adhesively -Bonded Assemblies Application to the Determination of the Adhesive Behaviour.” Computers & Structures 86(17): 1704 – 17. https://www.sciencedirect.com/science/article/pii/S0045794908000333. GOM. 2011. “Aramis(r) Software Version 6.3.1.” Karthikeyan, K et al. 2013. “The Effect of Shear Strength on the Ballistic Response of Laminated Composite Plates.” European Journal of Mechanics - A/Solids 42: 35 – 53. https://www.sciencedirect.com/science/article/pii/S0997753813000454. Liao, Lijuan, Chenguang Huang, and Toshiyuki Sawa. 2013. “Effect of Adhesive Thickness, Adhesive Type and Scarf Angle on the Mechanical Properties of Scarf Adhesive Joints.” International Journal of Solids and Structures 50(25): 4333 – 40. https://www.sciencedirect.com/science/article/pii/S0020768313003521. Oosterom, R., T. J. Ahmed, J. A. Poulis, and H. E.N. Bersee. 2006. “Adhesion Performance of UHMWPE after Different Surface Mo dification Techniques.” Medical Engineering and Physics 28(4): 323 – 30. Russell, B P, K Karthikeyan, V S Deshpande, and N A Fleck. 2013. “The High Strain Rate Response of Ultra High Molecular -Weight Polyethylene: From Fibre to Laminate.” International Journal of Impact Engineering 60: 1 – 9. https://www.sciencedirect.com/science/article/pii/S0734743X13000742. Sapozhnikov, S. B., O. A. Kudryavtsev,and M. V. Zhikharev. 2015. “Fragment Ballistic Performance of Homogenous and Hybrid Th ermoplastic Composites.” International Journal of Impact Engineering 81: 8 – 16. http://dx.doi.org/10.1016/j.ijimpeng.2015.03.004. Sohier, L, J Y Cognard, and P Davies. 2013. “Analysis of the Mechanical Behaviour of Adhesively Bonded Assemblies of Composit es under Tensile – Shear out-of-Plane Loads.” Composites Part A: Applied Science and Manufacturing 53: 65 – 74. https://www.sciencedirect.com/science/article/pii/S1359835X13001425. Thevenet, D, R Créac’hcadec, L Sohier, and J Y Cognard. 2013. “Experimental Analysis of the Behavior of Adhesively Bonded Joi nts under Tensile/Compression –Shear Cyclic Loadings.” International Journal of Adhesion and Adhesives 44: 15 – 25. https://www.sciencedirect.com/science/article/pii/S0143749613000122. Zulkifli, Faiz et al. 2019. “Strategic Positioning of Carbon Fiber Layers in an UHMwPE Ballistic Hybrid Composite Panel.” International Journal of Impact Engineering 129: 119 – 27.