PSI - Issue 42

Saveria Spiller et al. / Procedia Structural Integrity 42 (2022) 1239–1248 Saveria Spiller/ Structural Integrity Procedia 00 (2019) 000 – 000

1248 10

Materials , 13 (11). doi: 10.3390/ma13112493 Lengauer, W., Duretek, I., Fürst, M., Schwarz, V., Gonzalez-Gutierrez, J., Schuschnigg, S., Kukla, C., Kitzmantel, M., Neubauer, E., Lieberwirth, C., & Morrison, V. (2019). Fabrication and properties of extrusion-based 3D printed hardmetal and cermet components. International Journal of Refractory Metals and Hard Materials , 82 (February), 141 – 149. doi: 10.1016/j.ijrmhm.2019.04.011 Liu, B., Wang, Y., Lin, Z., & Zhang, T. (2020). Creating metal parts by Fused Deposition Modeling and Sintering. Materials Letters , 263 , 127252. doi: 10.1016/j.matlet.2019.127252 Loh, G. H., Pei, E., Gonzalez-Gutierrez, J., & Monzón, M. (2020). An overview of material extrusion troubleshooting. Applied Sciences (Switzerland) , 10 (14). doi: 10.3390/app10144776 Nurhudan, A. I., Supriadi, S., Whulanza, Y., & Saragih, A. S. (2021). Additive manufacturing of metallic based on extrusion process: A review. Journal of Manufacturing Processes , 66 (December 2020), 228 – 237. doi: 10.1016/j.jmapro.2021.04.018 Ramazani, H., & Kami, A. (2022). Metal FDM, a new extrusion-based additive manufacturing technology for manufacturing of metallic parts: a review. Progress in Additive Manufacturing , 0123456789 . doi: 10.1007/s40964-021-00250-x Rosnitschek, T., Tremmel, S., Seefeldt, A., Alber-Laukant, B., Neumeyer, T., & Altstädt, V. (2021). Correlations of geometry and infill degree of extrusion additively manufactured 316l stainless steel components. Materials , 14 (18). doi: 10.3390/ma14185173 Sadaf, M., Bragaglia, M., & Nanni, F. (2021). A simple route for additive manufacturing of 316L stainless steel via Fused Filament Fabrication. Journal of Manufacturing Processes , 67 (May), 141 – 150. doi: 10.1016/j.jmapro.2021.04.055 Shaikh, M. Q., Graziosi, S., & Atre, S. V. (2021). Supportless printing of lattice structures by metal fused filament fabrication (MF3) of Ti-6Al-4V: design and analysis. Rapid Prototyping Journal , 27 (7), 1408 – 1422. doi: 10.1108/RPJ-01-2021-0015 Singh, P., Balla, V. K., Gokce, A., Atre, S. V., & Kate, K. H. (2021). Additive manufacturing of Ti-6Al-4V alloy by metal fused filament fabrication (MF3): producing parts comparable to that of metal injection molding. Progress in Additive Manufacturing , 0123456789 . doi: 10.1007/s40964-021-00167-5 Singh, P., Balla, V. K., Tofangchi, A., Atre, S. V., & Kate, K. H. (2020). Printability studies of Ti-6Al-4V by metal fused filament fabrication (MF3). International Journal of Refractory Metals and Hard Materials , 91 (December 2019), 105249. doi: 10.1016/j.ijrmhm.2020.105249 Spiller, S., Berto, F., & Javad Razavi, S. M. (2022). Mechanical behavior of Material Extrusion Additive Manufactured components: an overview. Procedia Structural Integrity , 41 , 158 – 174. doi: 10.1016/j.prostr.2022.05.018 Suwanpreecha, C., Seensattayawong, P., Vadhanakovint, V., & Manonukul, A. (2021). Influence of Specimen Layout on 17-4PH (AISI 630) Alloys Fabricated by Low-Cost Additive Manufacturing. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science , 52 (5), 1999 – 2009. doi: 10.1007/s11661-021-06211-x Thompson, Y., Gonzalez-Gutierrez, J., Kukla, C., & Felfer, P. (2019). Fused filament fabrication, debinding and sintering as a low cost additive manufacturing method of 316L stainless steel. Additive Manufacturing , 30 (May), 100861. doi: 10.1016/j.addma.2019.100861 Thompson, Y., Polzer, M., Gonzalez-Gutierrez, J., Kasian, O., Heckl, J. P., Dalbauer, V., Kukla, C., & Felfer, P. J. (2021). Fused Filament Fabrication-Based Additive Manufacturing of Commercially Pure Titanium. Advanced Engineering Materials , 2100380 , 1 – 12. doi: 10.1002/adem.202100380 Tosto, C., Tirillò, J., Sarasini, F., & Cicala, G. (2021). Hybrid metal/polymer filaments for fused filament fabrication (FFF) to print metal parts. Applied Sciences (Switzerland) , 11 (4), 1. doi: 10.3390/app11041444 Wu, G., Langrana, N. A., Sadanji, R., & Danforth, S. (2002). Solid freeform fabrication of metal components using fused deposition of metals. Materials and Design , 23 (1), 97 – 105. doi: 10.1016/s0261-3069(01)00079-6