PSI - Issue 42

Saveria Spiller et al. / Procedia Structural Integrity 42 (2022) 1239–1248 Saveria Spiller/ Structural Integrity Procedia 00 (2019) 000 – 000

1247

9

(2019). Fused filament fabrication (FFF) of metal-ceramic components. Journal of Visualized Experiments , 2019 (143). doi: 10.3791/57693 Agarwala, M. K., Weeren, R. Van, Bandyopadhyay, A., Safari, A., Danforth, S. C., & Priedeman, W. R. (1996). Filament Feed Materials for Fused Deposition Processing of Ceramics and Metals. Proceedings Ofthe Solid Freeform Fabrication Symposium , 451 – 458. Retrieved from http://hdl.handle.net/2152/70277 Alkindi, T., Alyammahi, M., Susantyoko, R. A., & Atatreh, S. (2021). The effect of varying specimens’ printing angles to the bed surface on the tensile strength of 3D-printed 17-4PH stainless-steels via metal FFF additive manufacturing. MRS Communications , 11 (3), 310 – 316. doi: 10.1557/s43579-021-00040-0 ASM Material Data Sheet (matweb.com) . (n.d.). Retrieved from https://asm.matweb.com/search/SpecificMaterial.asp?bassnum=mq316q BASF Ultrafuse 316L . (n.d.). Retrieved from https://www.ultrafusefff.com/product-category/metal/ultrafuse-316l/ Bose, A., Schuh, C. A., Tobia, J. C., Tuncer, N., Mykulowycz, N. M., Preston, A., Barbati, A. C., Kernan, B., Gibson, M. A., Krause, D., Brzezinski, T., Schroers, J., Fulop, R., Myerberg, J. S., Sowerbutts, M., Chiang, Y. M., John Hart, A., Sachs, E. M., Lomeli, E. E., & Lund, A. C. (2018). Traditional and additive manufacturing of a new Tungsten heavy alloy alternative. International Journal of Refractory Metals and Hard Materials , 73 (December 2017), 22 – 28. doi: 10.1016/j.ijrmhm.2018.01.019 Caminero, M. Á., Romero, A., Chacón, J. M., Núñez, P. J., García-Plaza, E., & Rodríguez, G. P. (2021). Additive manufacturing of 316L stainless-steel structures using fused filament fabrication technology: mechanical and geometric properties. Rapid Prototyping Journal , 27 (3), 583 – 591. doi: 10.1108/RPJ-06-2020-0120 Cerejo, F., Gatões, D., & Vieira, M. T. (2021). Optimization of metallic powder filaments for additive manufacturing extrusion (MEX). International Journal of Advanced Manufacturing Technology , 115 (7 – 8), 2449 – 2464. doi: 10.1007/s00170-021-07043-0 Damon, J., Dietrich, S., Gorantla, S., Popp, U., Okolo, B., & Schulze, V. (2019). Process porosity and mechanical performance of fused filament fabricated 316L stainless steel. Rapid Prototyping Journal , 25 (7), 1319 – 1327. doi: 10.1108/RPJ-01-2019-0002 Dehdari Ebrahimi, N., & Ju, Y. S. (2018). Thermal conductivity of sintered copper samples prepared using 3D printing-compatible polymer composite filaments. Additive Manufacturing , 24 (August), 479 – 485. doi: 10.1016/j.addma.2018.10.025 Galati, M., & Minetola, P. (2019). Analysis of density, roughness, and accuracy of the atomic diffusion additive manufacturing (ADAM) process for metal parts. Materials , 12 (24). doi: 10.3390/ma1224122 German, R M. (2010a). Thermodynamics of sintering. In Sintering of advanced materials: Fundamentals and processes. Woodhead Publishing Limited. doi: 10.1533/9781845699949.1.110 German, Randall M. (2010b). Coarsening in sintering: Grain shape distribution, grain size distribution, and grain growth kinetics in solid-pore systems. Critical Reviews in Solid State and Materials Sciences , 35 (4), 263 – 305. doi: 10.1080/10408436.2010.525197 Godec, D., Cano, S., Holzer, C., & Gonzalez-Gutierrez, J. (2020). Optimization of the 3D printing parameters for tensile properties of specimens produced by fused filament fabrication of 17-4PH stainless steel. Materials , 13 (3). doi: 10.3390/ma13030774 Gong, H., Snelling, D., Kardel, K., & Carrano, A. (2019). Comparison of Stainless Steel 316L Parts Made by FDM- and SLM-Based Additive Manufacturing Processes. Jom , 71 (3), 880 – 885. doi: 10.1007/s11837-018-3207-3 Gonzalez-Gutierrez, J., Cano, S., Schuschnigg, S., Kukla, C., Sapkota, J., & Holzer, C. (2018). Additive manufacturing of metallic and ceramic components by the material extrusion of highly-filled polymers: A review and future perspectives. Materials , 11 (5). doi: 10.3390/ma11050840 Hassan, W., Farid, M. A., Tosi, A., Rane, K., & Strano, M. (2021). The effect of printing parameters on sintered properties of extrusion-based additively manufactured stainless steel 316L parts. International Journal of Advanced Manufacturing Technology , 114 (9 – 10), 3057 – 3067. doi: 10.1007/s00170-021-07047-w Henry, T. C., Morales, M. A., Cole, D. P., Shumeyko, C. M., & Riddick, J. C. (2021). Mechanical behavior of 17-4 PH stainless steel processed by atomic diffusion additive manufacturing. International Journal of Advanced Manufacturing Technology , 114 (7 – 8), 2103 – 2114. doi: 10.1007/s00170-021-06785-1 Kurose, T., Abe, Y., Santos, M. V. A., Kanaya, Y., Ishigami, A., Tanaka, S., & Ito, H. (2020). Influence of the layer directions on the properties of 316l stainless steel parts fabricated through fused deposition of metals.