PSI - Issue 64

A. Alecci et al. / Procedia Structural Integrity 64 (2024) 1951–1958 Alecci et al. / Structural Integrity Procedia 00 (2019) 000 – 000

1958

8

Acknowledgements This study was carried out within the RETURN Extended Partnership and received funding from the European Union Next-GenerationEU (National Recovery and Resilience Plan – NRRP, Mission 4, Component 2, Investment 1.3 – D.D. 1243 2/8/2022, PE0000005). The financial support of the Italian Ministry of University and Research (MUR) through the PRIN2022 project ‘Unified approach for improving structural and thermal response of masonry buildings with optimized sustainable composite materials — ASThRO- Co’ is gr atefully acknowledged. References Alecci, V. et al., 2023. Stability Assessment of Masonry Arches Reinforced with Fiber-Reinforced Composite Materials Under Large Deformation. In: 2nd Italian Workshop on Shell and Spatial Structures, IWSS 2023. Lecture Notes in Civil Engineering, 437, Springer, https://doi.org/10.1007/978-3-031-44328-2_77 Alecci, V. et al., 2021. Reliability of Different Test Setups and Influence of Mortar Mixture on the Fabric-Reinforced Cementitious Matrix-to Brick Bond Response J. Test. Eval., 49(6): 4476-4495, https://doi.org/10.1520/JTE20200656 Alecci, V. et al., 2019. Estimating elastic modulus of tuff and brick masonry: A comparison between onsite and laboratory tests. Construction and Building Materials, 204, 828-838, https://doi.org/10.1016/j.conbuildmat.2019.01.224 Alecci, V. et al., 2016. Experimental investigation on masonry arches strengthened with PBO-FRCM composite. Composites Part B: Engineering 100, 228-239, https://doi.org/10.1016/j.compositesb.2016.05.063 ASTMD3039/D3039M17, 2017. Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials, (West Conshohocken, PA: ASTM International). Barducci, S. et al., 2020. Experimental and Analytical Investigations on Bond Behavior of Basalt-FRCM Systems. Journal of Composites for Construction 24, 1, https://doi.org/10.1061/(ASCE)CC.1943-5614.0000985 D’Antino, T., Pellegrino, C., Carloni, C., Sneed, L.H., Giacomin, G. 2014. Experimental Analysis of the Bond Behavior of Glas s, Carbon, and Steel FRCM Composites. KEM 624, 371 – 378. https://doi.org/10.4028/ Focacci, F., D'Antino, T., Carloni, C., Sneed, L.H., Pellegrino, C. An indirect method to calibrate the interfacial cohesive material law for FRCM concrete joints, Materials & Design, Volume 128, 2017, Pages 206-217, ISSN 0264-1275, https://doi.org/10.1016/j.matdes.2017.04.038. Mistretta, F., Stochino, F., Sassu, M. Structural and thermal retrofitting of masonry walls: An integrated cost-analysis approach for the Italian context. Build. Environ. 2019, 155, 127 – 136, https://doi.org/10.1016/j.buildenv.2019.03.033 Napolano, L.; Menna, C.; Asprone, D.; Prota, A.; Manfredi, G. LCA-based study on structural retrofit options for masonry buildings. Int. J. Life Cycle Assess. 2015, 20, 23 – 35, Pugliese, D., Alecci, V., Romano, R., Stipo, G., De Stefano, M., Nanni, A. Innovative and Sustainable Composite Material for the Seismic and Energetic Upgrade of Historic Masonry Buildings. Fibers 2023, 11, 76. https://doi.org/10.3390/fib11090076 Raoof S. M., Koutas L. N., Bournas D. A., Bond between textile-reinforced mortar (TRM) and concrete substrates: Experimental investigation, Composites Part B: Engineering, 98, 2016, 350-361, https://doi.org/10.1016/j.compositesb.2016.05.041. Simões, A., Bento, R., Gago, A. & Lopes, M., 2016. Mechanical Characterization of Masonry Walls With Flat-Jack Tests. Experimental Techniques, 40(3), pp. 1163-1178. UNIEN 1015, 2019. Test methods for masonry mortars. Part 11: Determination of flexural and compressive strength of hardened mortar. UNIEN 15026, 2008. Hygrothermal performance of building components and building elements – Assessment of moisture transfer by numerical simulation. Valluzzi, M. R., Binda, L. & Modena, C., 2005. Mechanical behaviour of historic masonry structures strengthened by bed joints structural repointing. Construction and Building Materials, 19(1), 63-73. UNI/TR 11552, 2014. Opaque envelope components of buildings - Thermo-physical parameters. UNIEN998-1, 2016-1. Specification for mortar for masonry – part 1. Rendering and plastering mortar.