PSI - Issue 64

First page Table of contents Previous page 1605 Next page Last page

ScienceDirect Structural Integrity Procedia 00 (2023) 000–000 Structural Integrity Procedia 00 (2023) 000–000 Available online at www.sciencedirect.com Available online at www.sciencedirect.com ScienceDirect Available online at www.sciencedirect.com ScienceDirect

www.elsevier.com/locate/procedia www.elsevier.com/locate/procedia

Procedia Structural Integrity 64 (2024) 951–958

SMAR 2024 – 7th International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures Open issues on the use of carbon composite tendons as prestressed reinforcement of concrete members A. Cagnoni a* , P. Colombi a , M.A. Pisani a , T. D’Antino a a Politecnico di Milano, Piazza Leonardo da Vinci 32, Milano 20133, Italy Abstract In the last decades, fiber-reinforced polymer (FRP) composites gained popularity in the field of structural engineering thanks to their high mechanical properties and limited corrosion in harsh environments. These composites are used as reinforcement of new concrete members as well as for strengthening of existing structures. For existing reinforced concrete (RC) structures, different techniques are available to increase the strength and stiffness of the existing elements. Among them, a promising technology consists in inducing to the element a bending moment opposite to that induced by the applied load by using external prestressed FRP tendons. This technique increases the load carrying capacity of the beams and induces concrete crack closure, thus reducing the exposure of steel bars to the environment. In this paper, a literature review is carried out to investigate the open issues that hinder the diffusion of prestressing made with composite carbon fiber tendons. According to the literature, the main issue is represented by the anchor system that should guarantee high stress level into the composite material avoiding local ruptures. Another open issue is the definition of the maximum stress applied to the composite with respect to its tensile strength. In fact, high levels of stress may induce premature composite failure. Finally, the exposure of CFRP bars to some harsh environmental conditions and high temperatures may negatively affect the reinforcement effectiveness. © 2024 The Authors. Published by ELSEVIER B.V. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0) SMAR 2024 – 7th International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures Open issues on the use of carbon composite tendons as prestressed reinforcement of concrete members A. Cagnoni a* , P. Colombi a , M.A. Pisani a , T. D’Antino a a Politecnico di Milano, Piazza Leonardo da Vinci 32, Milano 20133, Italy Abstract In the last decades, fiber-reinforced polymer (FRP) composites gained popularity in the field of structural engineering thanks to their high mechanical properties and limited corrosion in harsh environments. These composites are used as reinforcement of new concrete members as well as for strengthening of existing structures. For existing reinforced concrete (RC) structures, different techniques are available to increase the strength and stiffness of the existing elements. Among them, a promising technology consists in inducing to the element a bending moment opposite to that induced by the applied load by using external prestressed FRP tendons. This technique increases the load carrying capacity of the beams and induces concrete crack closure, thus reducing the exposure of steel bars to the environment. In this paper, a literature review is carried out to investigate the open issues that hinder the diffusion of prestressing made with composite carbon fiber tendons. According to the literature, the main issue is represented by the anchor system that should guarantee high stress level into the composite material avoiding local ruptures. Another open issue is the definition of the maximum stress applied to the composite with respect to its tensile strength. In fact, high levels of stress may induce premature composite failure. Finally, the exposure of CFRP bars to some harsh environmental conditions and high temperatures may negatively affect the reinforcement effectiveness. © 2024 The Authors. Published by ELSEVIER B.V. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0) Peer-review under responsibility of SMAR 2024 Organizers Keywords: FRP bars, Prestressing, Anchor, Strengthening, SOTA © 2024 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0) Peer-review under responsibility of SMAR 2024 Organizers Peer-review under responsibility of SMAR 2024 Organizers Keywords: FRP bars, Prestressing, Anchor, Strengthening, SOTA

* Corresponding author. Tel.: +39 0223995109. E-mail address: alessandro.cagnoni@polimi.it * Corresponding author. Tel.: +39 0223995109. E-mail address: alessandro.cagnoni@polimi.it

2452-3216 © 2024 The Authors. Published by ELSEVIER B.V. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0) Peer-review under responsibility of SMAR 2024 Organizers 2452-3216 © 2024 The Authors. Published by ELSEVIER B.V. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0) Peer-review under responsibility of SMAR 2024 Organizers

Made with FlippingBook Digital Proposal Maker