PSI - Issue 64

Zohaib Hassan et al. / Procedia Structural Integrity 64 (2024) 1184–1191 Hassan Z. et. al / Structural Integrity Procedia 00 (2024) 000 – 000

1191

8

References

Bi, M., Tran, P., Xia, L., Ma, G., & Xie, Y. M. (2022). Topology optimization for 3D concrete printing with various manufacturing constraints. Additive Manufacturing , 57 . https://doi.org/10.1016/j.addma.2022.102982 Hassan, Z., A. Bernal, S., Saim Raza, Kammer, D., Shafei, B., Mahoutian, M., & Shahverdi, M. (2024). Feasibility Assessment of 3D Printability of Portland Cement-Steel Slag Blended Mortar Submitted for RILEM-Digital Concrete 2024 Munich, Germany Hojati, M., Li, Z., Memari, A. M., Park, K., Zahabi, M., Nazarian, S., Duarte, J. P., & Radlińska, A. (2022). 3D -printable quaternary cementitious materials towards sustainable development: Mixture design and mechanical properties. Results in Engineering , 13 . https://doi.org/10.1016/j.rineng.2022.100341 Kuzmenko, K., Ducoulombier, N., Feraille, A., & Roussel, N. (2022). Environmental impact of extrusion-based additive manufacturing: generic model, power measurements and influence of printing resolution. Cement and Concrete Research , 157 . https://doi.org/10.1016/j.cemconres.2022.106807 Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Law, R., Gibb, A. G. F., & Thorpe, T. (2012). Hardened properties of high-performance printing concrete. Cement and Concrete Research , 42 (3), 558-566. https://doi.org/10.1016/j.cemconres.2011.12.003 Marchment, T., Sanjayan, J., & Xia, M. (2019). Method of enhancing interlayer bond strength in construction scale 3D printing with mortar by effective bond area amplification. Materials & Design , 169 . https://doi.org/10.1016/j.matdes.2019.107684 Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018). Additive manufacturing (3D printing): A review of materials, methods, applications and challenges. Composites Part B: Engineering , 143 , 172-196. https://doi.org/10.1016/j.compositesb.2018.02.012 Yu, Q., Zhu, B., Li, X., Meng, L., Cai, J., Zhang, Y., & Pan, J. (2023). Investigation of the rheological and mechanical properties of 3D printed eco-friendly concrete with steel slag. Journal of Building Engineering , 72 . https://doi.org/10.1016/j.jobe.2023.106621 Zareiyan, B., & Khoshnevis, B. (2017). Effects of interlocking on interlayer adhesion and strength of structures in 3D printing of concrete. Automation in Construction , 83 , 212-221. https://doi.org/10.1016/j.autcon.2017.08.019 Zhang, C., Nerella, V. N., Krishna, A., Wang, S., Zhang, Y., Mechtcherine, V., & Banthia, N. (2021). Mix design concepts for 3D printable concrete: A review. Cement and Concrete Composites , 122 . https://doi.org/10.1016/j.cemconcomp.2021.104155