PSI - Issue 7

Sho Hashimoto et al. / Procedia Structural Integrity 7 (2017) 453–459 Sho Hashimoto / Structural Integrity Procedia 00 (2017) 000–000

459

7

4. Conclusions According to fracture mechanics principles, in order to quantify the results of the RCF testing of rolling bearings with small drilled holes, Mode II SIF range of ring-shaped cracks emanating around the edge of drilled holes due to the passage of rolling elements was analyzed via FEM. Based on the results, an approximation formula for the SIF evaluation of the ring-shaped crack was proposed. The results derived will be used for the quantification of the RCF test results, as detailed in Part 2 of this paper. References Fujimatsu, T., Nakamizo, T., Nakasaki, M., Tsunekage, N., 2015. Crack Initiation and Propagation Behavior around the Defect in Steel under Rolling Contact Fatigue. ASTM international STP1580 Bearing steel technologies: 10th volume, advances in steel technologies for rolling bearing, 147–172. Ishida, M., 1976. Kiretsu no Danseikaiseki to Ouryokukakudaikeisuu. Second printing, Baifukan. Kassir, M.K., Sih, G.C., 1966. Three-Dimensional Stress Distribution around an Elliptical Crack under Arbitrary Loadings. Journal of Applied Mechanics 33, 601–611. Kida, K., Yamazaki, T., Shibata, M., Oguma, N., Harada, H., 2004. Crack Initiation from Micro Surface Holes in Bearings under Rolling Contact Fatigue. Fatigue & Fracture of Engineering Materials & Structures 27, 481–493. Kida, K., Yoshidome, K., Yamakawa, K., Harada, H., Oguma, N., 2006. Flaking Failures Originating from Microholes of Bearings under Rolling Contact Fatigue. Fatigue & Fracture of Engineering Materials & Structures 29, 1021–1030. Komata, H., Yamabe, J., Fukushima, Y., Matsuoka, S., 2012. Proposal of Rolling Contact Fatigue Crack Growth Test using a Specimen with a Small Artificial Hole. Transactions of the Japan Society of Mechanical Engineers A 78, 1250–1265. Komata, H., Yamabe, J., Matsunaga, H., Fukushima, Y., Matsuoka, S., 2013. Effect of Size and Depth of Small Defect on the Rolling Contact Fatigue Strength of a Bearing Steel SUJ2. Transactions of the Japan Society of Mechanical Engineers A 79, 961–975. Lundberg, G., Palmgren, A., 1947. Dynamic Capacity of Rolling Bearings. Acta Polytechnica Scandinavica-Mechanical Engineering Series 1, 5– 50. Matsunaga, H., Muramoto, S., Shomura, N., Endo, M., 2009. Shear Mode Growth and Threshold of Small Fatigue Cracks in SUJ2 Bearing Steel. Journal of the Society of Materials Science, Japan 58, 773–780. Matsunaga, H., Shomura, N., Muramoto, S., Endo, M., 2011. Shear Mode Threshold for a Small Fatigue Crack in a Bearing Steel. Fatigue & Fracture of Engineering Materials & Structures 34, 72–82. Mitamura, N., 2008. Rolling Contact Fatigue of Rolling Bearings and the Research Trend. Journal of Japanese Society of Tribologists 53, 641– 646. Murakami, Y., Hamada, S., Sugino, K., Takao, K., 1994. New Measurement Method of Mode II Threshold Stress Intensity Factor Range ∆ K τ th and its Application. Journal of the Society of Materials Science, Japan 43, 1264–1270. Murakami, Y., Fukuhara, T., Hamada, S., 2002. Measurement of Mode II Threshold Stress Intensity Factor Range Δ K II . Journal of the Society of Materials Science, Japan 51, 918–925. Murakami, Y., Takahashi, K., Kusumoto, R., 2003. Threshold and Growth Mechanism of Fatigue Cracks under Mode II and III Loadings. Fatigue & Fracture of Engineering Materials & Structures 26, 523–531. Murakami, Y., Fukushima, Y., Toyama, K., Matsuoka, S., 2008. Fatigue Crack Path and Threshold in Mode II and Mode III Loadings. Engineering Fracture Mechanics 75, 306–318. Okazaki, S., Matsunaga, H., Ueda, T., Komata, H., Endo, M., 2014. A Practical Expression for Evaluating the Small Shear-Mode Fatigue Crack Threshold in Bearing Steel. Theoretical and Applied Fracture Mechanics 73, 161–169. Okazaki, S., Wada, K., Matsunaga, H., Endo, M., 2017. The Influence of Static Crack-Opening Stress on the Threshold Level for Shear-Mode Fatigue Crack Growth in Bearing Steels. Engineering Fracture Mechanics 174, 127–138. Otsuka, A., Sugawara, H., Shomura, M., Aoyama, M., Yoo, S.K., Shibata, M., 1994. Mechanism of Rolling Contact Fatigue and Mode II Fatigue Crack Growth–A Proposal on a Mode II Fatigue Crack Growth Test Method. Journal of the Society of Materials Science, Japan 43, 55–61. Endo, M., Okazaki, S., Matsunaga, H., Moriyama, S., Munaoka, K., Yanase, K., 2015. A New Fatigue Testing Machine for Investigating the Behavior of Small Shear-Mode Fatigue Cracks. Experimental Techniques 40, 1065–1073.