PSI - Issue 64

Salvatore Verre et al. / Procedia Structural Integrity 64 (2024) 1508–1515 Salvatore Verre / Structural Integrity Procedia 00 (2019) 000 – 000

1515

8

Acknowledgements The authors acknowledge the support of the DPC-ReLUIS 2024 – 2026 project (WP 14). References

ACI. 549.6R-20, 2020. Guide to Design and Construction of Externally Bonded Fabric-Reinforced Cementitious Matrix (FRCM) and Steel Reinforced Grout (SRG). Systems for Repair and Strengthening Masonry Structures. Ascione, F., Lamberti, M., Napoli A., Realfonzo R., 2020. Experimental bond behavior of Steel Reinforced Grout systems for strengthening concrete elements. Construction and Building Materials 232, 117105. ASTM D 8337, 2021. Standard Test Method for Evaluation of Bond Properties of FRP Composite Applied to Concrete Substrate using Single-Lap Shear Test. Bencardino, F., Condello, A., Ashour, A.F., 2017. Single-lap shear bond tests on Steel Reinforced Geopolymeric Matrix-concrete joints. Composites Part B: Engineering, 110, 62-71. Bencardino, F., Carloni, C., Condello, A., Focacci, F., Napoli, A., Realfonzo, R., 2018. Flexural behaviour of RC members strengthened with FRCM: State-of-the-art and predictive formulas. Composites Part B 148,132–148. Carloni, C., Verre, S., Sneed, L.H., Ombres, L., 2017. Loading rate effect on the debonding phenomenon in fiber reinforced cementitious matrix concrete joints. Composites Part B 108, 301-314. Carloni, C., Verre, S., Sneed, L.H., Ombres, L., 2020. Open issues on the investigation of PBO FRCM-Concrete debonding. Composite Structures 299, 116062. D’Antino, T., Carloni, C., Sneed, L. H., Pellegrino, C., 2014. Matrix–fiber bond behavior in PBO FRCM composites: A fracture mechanics approach. Engineering Fracture Mechanics, 117, 94-111. D’Antino, T., Focacci, F., Sneed, L. H., Pellegrino, C., 2020. Shear strength model for RC beams with U-wrapped FRCM composites. Journal of Composites for Construction, 24(1), 04019057. Dai, J., Ueda, T., Sato, Y., 2006. Unified analytical approaches for determining shear bond characteristics of FRP-concrete interfaces through pullout tests, J. Adv. Concr. Technol. 4, 133–145. Focacci, F., D'Antino, T., Carloni, C., Sneed, L.H., Pellegrino, C., 2017. An indirect method to calibrate the interfacial cohesive material law for, Mater. Des. 128, 206–217. Focacci, F., D'Antino, T., Carloni, C., 2020. The role of the fiber–matrix interfacial properties on the tensile behavior of FRCM coupons. Construction and Building Materials, 265. Focacci, F., D’Antino, T., Carloni, C., 2022. Tensile testing of FRCM coupons for material characterization: Discussion of critical aspects. Journal of Composites for Construction, 26(4), 04022039. Focacci, F., M. M. Rahman, T. D’Antino, Carloni C., 2024. FRP Strips Externally Bonded to Quasibrittle Substrates: Discussion and Advances of Open Research Topics. Accepted for publication J. Compos. Constr. https://doi.org/10.1061/JCCOF2/CCENG-4603. Napoli, A., Realfonzo, R., 2015. Reinforced concrete beams strengthened with SRP/SRG systems: experimental investigation. Construction and Building Materials 93,654–677. National Research Council, 2018. Guide for the Design and Construction of Externally Bonded Fibre Reinforced Inorganic Matrix Systems for Strengthening Existing Structures, CNR-DT 215. Ombres, L., 2011. Flexural analysis of reinforced concrete beams strengthened with a cement based high strength composite material. Composite Structures 94, 143-155. Ombres, L., Verre, S., 2020. Experimental and numerical investigation on the Steel Reinforced Grout (SRG) composite-to-concrete bond, Journal of Composites Science 4, 182. Ombres, L., Verre, S., 2020. Influence of the Strengthening Configuration on the Shear Capacity of Reinforced Concrete Beams Strengthened with SRG (Steel-Reinforced Grout) Fibers, 10, 57. Santandrea, M., Focacci, F., Mazzotti, C., Ubertini, F., Carloni, C., 2020. Determination of the interfacial cohesive law for SRG composites bonded to a masonry substrate. Engineering Failure Analysis. Santandrea, M., Imohamed, I. A. O., Jahangir, H., Carloni, C., Mazzotti, C., De Miranda, S., ... Casadei, P., 2016. An investigation of the debonding mechanism in steel FRP-and FRCM-concrete joints. In 4th Workshop on the new boundaries of structural concrete (pp. 289-298). Sneed, L.H., Verre, S., Carloni, C., Ombres, L., 2016. Flexural behavior of RC beams strengthened with steel-FRCM composite. Engineering Structures 127,686–699. Thermou, G.E., De Santis, S., de Felice, G., Alotaibi, S., Roscini, F., Hajirasouliha, I., Guadagnini, M., 2021. Bond behaviour of multi-ply steel reinforced grout composites. Construction and Building Materials, 305. Ueda, T., Dai, J., 2005. Interface bond between FRP sheets and concrete substrates: properties, numerical modeling and roles in member behaviour, Prog. Struct. Engng Mater. 7, 27–43. UNI EN 206-1:2006. Concrete - Part 1: Specification, performance, production and conformity. UNI EN 1015-11:2007. Methods of Test for Masonry Units—Part 11: Determination of Flexural and Compressive Strength of Hardened Mortar. UNI EN 2561:1995. Materie plastiche rinforzate con fibre di carbonio. Laminati unidirezionali. Prova di trazione parallelamente alla direzione delle fibre.