PSI - Issue 64

Mohamed Elkafrawy et al. / Procedia Structural Integrity 64 (2024) 436–444 Author name / Structural Integrity Procedia 00 (2024) 000–000

443

8

Design , 40, pp. 90–102. Available at: https://doi.org/10.1016/j.matdes.2012.03.001. Alhamaydeh, M., Choudhary, I. and Assaleh, K. (2013) ‘Virtual testing of buckling-restrained braces via nonlinear autoregressive exogenous neural networks’, Journal of Computing in Civil Engineering , 27(6), pp. 755–768. Available at: https://doi.org/10.1061/(ASCE)CP.1943-5487.0000247. Alhamaydeh, M. and Ghazal Aswad, N. (2022) ‘Structural Health Monitoring Techniques and Technologies for Large-Scale Structures: Challenges, Limitations, and Recommendations’, Practice Periodical on Structural Design and Construction , 27(3), p. 03122004. Available at: https://doi.org/10.1061/(ASCE)SC.1943-5576.0000703. Alhamaydeh, M.H., Barakat, S.A. and Abed, F.H. (2013) ‘Multiple regression modeling of natural rubber seismic isolation systems with supplemental viscous damping for near-field ground motion’, Journal of Civil Engineering and Management , 19(5), pp. 665–682. Available at: https://doi.org/10.3846/13923730.2013.799089. El Ame, F., Mwero, J.N. and Kabubo, C.K. (2020) Openings Effect on the Performance of Reinforced Concrete Beams Loaded in Bending and Shear , Technology & Applied Science Research . Available at: www.etasr.com. Assaleh, K., AlHamaydeh, M. and Choudhary, I. (2015) ‘Modeling nonlinear behavior of Buckling-Restrained Braces via different artificial intelligence methods’, Applied Soft Computing Journal , 37, pp. 923–938. Available at: https://doi.org/10.1016/j.asoc.2015.09.014. Chen, T., Gu, X. and Li, H. (2011) ‘Behavior of steel-concrete composite cantilever beams with web openings under negative moment’, International Journal of Steel Structures , 11(1), pp. 39–49. Available at: https://doi.org/10.1007/S13296-011-1004-8. Cladera, A. et al. (2022) ‘Shear Strengthening of Reinforced Concrete Beams Through the Use of Iron-Based Shape Memory Alloys: From the Proof-of-Concept to the Real Scale’, Hormigon y Acero , 73(296), pp. 7–15. Available at: https://doi.org/10.33586/hya.2020.2685. Elkafrawy, M. et al. (2022) ‘FEA Investigation of Elastic Buckling for Functionally Graded Material (FGM) Thin Plates with Different Hole Shapes under Uniaxial Loading’, Buildings , 12(6). Available at: https://doi.org/10.3390/buildings12060802. Elkafrawy, M. et al. (2023) ‘Enhancing the Shear Capacity of RC Beams with Web Openings in Shear Zones Using Pre-Stressed Fe-SMA Bars: Numerical Study’, Buildings , 13(6). Available at: https://doi.org/10.3390/buildings13061505. Elkafrawy, M.E. et al. (2022) ‘Nonlinear Finite Element Analysis (NLFEA) of Pre-stressed RC Beams Reinforced with Iron-Based Shape Memory Alloy (Fe-SMA)’, in 2022 Advances in Science and Engineering Technology International Conferences (ASET) . IEEE, pp. 1–7. Available at: https://doi.org/10.1109/ASET53988.2022.9735110. Izadi, M.R. et al. (2018) ‘Development of an iron-based shape memory alloy (Fe-SMA) strengthening system for steel plates’, Engineering Structures , 174, pp. 433–446. Available at: https://doi.org/10.1016/j.engstruct.2018.07.073. Khalil, A. et al. (2023) ‘Numerical Investigation of Flexural Behavior of Reinforced Concrete (RC) T-Beams Strengthened with Pre-Stressed Iron-Based (FeMnSiCrNi) Shape Memory Alloy Bars’, Journal of Composites Science , 7(6), p. 258. Available at: https://doi.org/10.3390/jcs7060258. El Maaddawy, T. and Sherif, S. (2009) ‘FRP composites for shear strengthening of reinforced concrete deep beams with openings’, Composite Structures , 89(1), pp. 60–69. Available at: https://doi.org/10.1016/j.compstruct.2008.06.022. Michael, S. (2009) ‘ABAQUS/Standard User’s Manual’. USA: Dassault Systèmes Simulia Corp: Johnston. Nie, X.F. et al. (2020a) ‘Strengthening of RC beams with rectangular web openings using externally bonded FRP: Numerical simulation’, Composite Structures , 248. Available at: https://doi.org/10.1016/j.compstruct.2020.112552. Nie, X.F. et al. (2020b) ‘Strengthening of RC beams with rectangular web openings using externally bonded FRP: Numerical simulation’, Composite Structures , 248. Available at: https://doi.org/10.1016/j.compstruct.2020.112552. Nie, X.F., Zhang, S.S. and Yu, T. (2021) ‘On the FE modelling of RC beams with a fibre-reinforced polymer (FRP)- strengthened web opening’, Composite Structures , 271. Available at: https://doi.org/10.1016/j.compstruct.2021.114161. Osman, B.H. et al. (2017) ‘Shear behavior of Reinforced Concrete (RC) beams with circular web openings without additional shear reinforcement’, KSCE Journal of Civil Engineering , 21(1), pp. 296–306. Available at: https://doi.org/10.1007/s12205-016-0387-7. Qiang, X. et al. (2023) ‘Research Progress and Applications of Fe-Mn-Si-Based Shape Memory Alloys on Reinforcing Steel and Concrete Brdiges’, Applied Sciences (Switzerland) . MDPI. Available at: https://doi.org/10.3390/app13063404.