PSI - Issue 57

Kimmo Kärkkäinen et al. / Procedia Structural Integrity 57 (2024) 271–279 K. Ka¨rkka¨inen et al. / Structural Integrity Procedia 00 (2023) 000–000

279

9

de Matos, P., Nowell, D., 2007. On the accurate assessment of crack opening and closing stresses in plasticity-induced fatigue crack closure problems. Engineering Fracture Mechanics 74, 1579–1601. doi: 10.1016/j.engfracmech.2006.09.007 . Elber, W., 1970. Fatigue crack closure under cyclic tension. Engineering Fracture Mechanics 2, 37–45. doi: 10.1016/0013-7944(70)90028-7 . Ellyin, F., Wu, J., 1999. A numerical investigation on the e ff ect of an overload on fatigue crack opening and closure behaviour. Fatigue & Fracture of Engineering Materials & Structures 22, 835–847. doi: 10.1046/j.1460-2695.1999.00223.x . Fang, X., Wang, H., Li, W., Liu, G., Cai, B., 2022. Fatigue crack growth prediction method for o ff shore platform based on digital twin. Ocean Engineering 244, 110320. doi: 10.1016/j.oceaneng.2021.110320 . Ka¨rkka¨inen, K., Vaara, J., Va¨nta¨nen, M., Niskanen, I., Frondelius, T., 2023. The role of plasticity-induced crack closure in the non-propagation prediction of surface defect-initiated cracks near fatigue limit. International Journal of Fatigue 168, 107462. doi: 10.1016/j.ijfatigue. 2022.107462 . Liang, H., Wang, D., Deng, C., Zhan, R., 2022a. Fatigue crack growth acceleration in s355 steel under a single and periodic underload. International Journal of Fatigue 158, 106744. doi: 10.1016/j.ijfatigue.2022.106744 . Liang, H., Zhan, R., Wang, D., Deng, C., Xu, X., Guo, B., 2022b. E ff ect of crack-tip deformation on fatigue crack growth: A comparative study under overload / underload conditions. Theoretical and Applied Fracture Mechanics 118, 103268. doi: 10.1016/j.tafmec.2022.103268 . Maierhofer, J., Pippan, R., Ga¨nser, H.P., 2014. Modified NASGRO equation for physically short cracks. International Journal of fatigue 59, 200–207. doi: 10.1016/j.ijfatigue.2013.08.019 . Makabe, C., Purnowidodo, A., McEvily, A., 2004. E ff ects of surface deformation and crack closure on fatigue crack propagation after overloading and underloading. International Journal of fatigue 26, 1341–1348. doi: 10.1016/j.ijfatigue.2004.03.017 . McClung, R., Sehitoglu, H., 1989. On the finite element analysis of fatigue crack closure—1. Basic modeling issues. Engineering Fracture Mechanics 33, 237–252. doi: 10.1016/0013-7944(89)90027-1 . McClung, R.C., Thacker, B.H., Roy, S., 1991. Finite element visualization of fatigue crack closure in plane stress and plane strain. International Journal of Fracture 50, 27–49. doi: 10.1007/BF00035167 . Mlikota, M., Schmauder, S., Bozˇicˇ, v., Hummel, M., 2017. Modelling of overload e ff ects on fatigue crack initiation in case of carbon steel. Fatigue & Fracture of Engineering Materials & Structures 40, 1182–1190. doi: 10.1111/ffe.12598 . Murakami, Y., 2019. 6 – E ff ects of nonmetallic inclusions on fatigue strength, in: Murakami, Y. (Ed.), Metal Fatigue (Second Edition). Academic Press, pp. 95–150. doi: 10.1016/B978-0-12-813876-2.00006-6 . Murakami, Y., Beretta, S., 1999. Small defects and inhomogeneities in fatigue strength: experiments, models and statistical implications. Extremes 2, 123–147. doi: 10.1023/A:1009976418553 . Murakami, Y., Endo, M., 1994. E ff ects of defects, inclusions and inhomogeneities on fatigue strength. International Journal of Fatigue 16, 163–182. doi: 10.1016/0142-1123(94)90001-9 . Newman, J.C., 1984. A crack opening stress equation for fatigue crack growth. International Journal of Fracture 24, R131–R135. doi: 10.1007/ BF00020751 . Oplt, T., Sˇ eb´ık, M., Berto, F., Na´hl´ık, L., Pokorny´, P., Hutaˇr, P., 2019. Strategy of plasticity induced crack closure numerical evaluation. Theoretical and Applied Fracture Mechanics 102, 59–69. doi: 10.1016/j.tafmec.2019.04.004 . Paris, P.C., Tada, H., Donald, J., 1999. Service load fatigue damage — a historical perspective. International Journal of Fatigue 21, S35–S46. doi: 10.1016/S0142-1123(99)00054-7 . Pavlina, E., Vantyne, C., 2008. Correlation of yield strength and tensile strength with hardness for steels. Journal of Materials Engineering and Performance 17, 888–893. doi: 10.1007/s11665-008-9225-5 . Pippan, R., Hohenwarter, A., 2017. Fatigue crack closure: a review of the physical phenomena. Fatigue & Fracture of Engineering Materials & Structures 40, 471–495. doi: 10.1111/ffe.12578 . Pommier, Bompard, 2000. Bauschinger e ff ect of alloys and plasticity-induced crack closure: a finite element analysis. Fatigue & Fracture of Engineering Materials & Structures 23, 129–139. doi: 10.1046/j.1460-2695.2000.00259.x . Rice, J., 1967. Mechanics of crack tip deformation and extension by fatigue. ASTM STP 415, 247–311. doi: 10.1520/STP47234S . Roychowdhury, S., Dodds, R.H., 2003. A numerical investigation of 3-D small-scale yielding fatigue crack growth. Engineering Fracture Mechanics 70, 2363–2383. doi: 10.1016/S0013-7944(03)00003-1 . Scho¨nbauer, B.M., Ghosh, S., Ko¨mi, J., Frondelius, T., Mayer, H., 2021. Influence of small defects and nonmetallic inclusions on the high and very high cycle fatigue strength of an ultrahigh-strength steel. Fatigue & Fracture of Engineering Materials & Structures 44, 2990–3007. doi: 10.1111/ffe.13534 . Singh, K.D., Parry, M.R., Sinclair, I., 2008. Some issues on finite element modelling of plasticity induced crack closure due to constant amplitude loading. International Journal of Fatigue 30, 1898–1920. doi: 10.1016/j.ijfatigue.2008.01.013 . Solanki, K., Daniewicz, S., Newman, J., 2003. Finite element modeling of plasticity-induced crack closure with emphasis on geometry and mesh refinement e ff ects. Engineering Fracture Mechanics 70, 1475–1489. doi: 10.1016/S0013-7944(02)00168-6 . Song, S.H., Lee, K.R., Kim, A., 2001. Analysis on short crack growth rate after single overload under cyclic bending moment. International Journal of Precision Engineering and Manufacturing 2, 19–26. Sta¨cker, C., Sander, M., 2017. Experimental, analytical and numerical analyses of constant and variable amplitude loadings in the very high cycle fatigue regime. Theoretical and Applied Fracture Mechanics 92, 394–409. doi: 10.1016/j.tafmec.2017.07.021 . Suresh, S., Ritchie, R., 1984. Propagation of short fatigue cracks. International metals reviews 29, 445–475. doi: 10.1179/imtr.1984.29.1.445 . Vosikovsky, O., Rivard, A., 1981. Growth of surface fatigue cracks in a steel plate. International Journal of Fatigue 3, 111–115. doi: 10.1016/ 0142-1123(81)90058-X . Wheeler, O.E., 1972. Spectrum Loading and Crack Growth. Journal of Basic Engineering 94, 181–186. doi: 10.1115/1.3425362 . Zhao, T., Zhang, J., Jiang, Y., 2008. A study of fatigue crack growth of 7075-t651 aluminum alloy. International Journal of Fatigue 30, 1169–1180. doi: 10.1016/j.ijfatigue.2007.09.006 .