PSI - Issue 57

Kaushik Iyer et al. / Procedia Structural Integrity 57 (2024) 469–477 Author name / Structural Integrity Procedia 00 (2019) 000 – 000

477

9

costs of the welded structure. Finally, the results show that the use-phase of the welded structure is the most influential in determining the life-cycle cost, further motivating the use of such PWT to extend the fatigue life of the weld. Acknowledgements The Swedish funding agency VINNOVA is greatly acknowledged for financial support within the MIDWEST project grant number. References Al-Karawi, H., and M. Al-Emrani. 2021. "The efficiency of HFMI treatment and TIG remelting for extending the fatigue life of existing welded structures." Steel Construction 14: 95-106. doi:10.1002/stco.202000053. Al-Karawi, H., R. U. F. von Bock und Polach, and M. Al-Emrani. 2021. "Fatigue life extension of existing welded structures via high frequency mechanical impact (HFMI) treatment." Engineering Structures 239. doi:10.1016/j.engstruct.2021.112234. Bhimani, A. 2001. Management Accounting Manual. Caccese, V., P. A. Blomquist, K. A. Berube, S. R. Webber, and N. J. Orozco. 2006. "Effect of weld geometric profile on fatigue life of cruciform welds made by laser/GMAW processes." Marine Structures 19: 1-22. doi:10.1016/j.marstruc.2006.07.002. Hagnell, M. K., M. Khurshid, M. Åkermo, and Z. Barsoum. 2021. "Design implications and opportunities of considering fatigue strength, manufacturing variations and predictive lcc in welds." Metals 11. doi:10.3390/met11101527. Karlsson Hagnell, Mathilda, and Malin Åkermo. 2015. "A composite cost model for the aeronautical industry : Methodology and case study." Composites Part B: Engineering 79: 254 – 261. doi:10.1016/j.compositesb.2015.04.043. Kuss, A., T. Dietz, F. Spenrath, and A. Verl. 2017. "Automated Planning of Robotic MAG Welding Based on Adaptive Gap Model." 612-617. doi:10.1016/j.procir.2016.07.008. Lippardt, S. 2023. "Influence of the geometry on the fatigue strength of welded joints using the effective notch stress approach." Welding in the World 67: 669-681. doi:10.1007/s40194-022-01409-y. Marquis, G. B., and Z. Barsoum. 2016. "IIW Recommendations on High Frequency Mechanical Impact (HFMI) Treatment for Improving the Fatigue Strength of Welded Joints." IIW Recommendations for the HFMI Treatment 1-34. Sesana, Marta Maria, and Graziano Salvalai. 2013. "Overview on life cycle methodologies and economic feasibility for nZEBs." Building and Environment 67: 211-216. doi:https://doi.org/10.1016/j.buildenv.2013.05.022. Tsutsumi, S., R. Fincato, P. Luo, M. Sano, T. Umeda, T. Kinoshita, and T. Tagawa. 2022. "Effects of weld geometry and HAZ property on low-cycle fatigue behavior of welded joint." International Journal of Fatigue 156. doi:10.1016/j.ijfatigue.2021.106683.