PSI - Issue 57

Francis Blanc et al. / Procedia Structural Integrity 57 (2024) 343–354 Francis BLANC / Structural Integrity Procedia 00 (2019) 000 – 000

354 12

testing processes on ropes synthetics... This work can only be done with industrialists who are strongly involved in CETIM's Working Groups. Thanks to them. 10. References [1 ] D. Drucker and H. Tachau, “A New Design Criterion for Wire Rope,” J. Appl. Mech., Vol. 67 A -337, 1945. [2 ] G. Foster, “Advantages of Fiber Rope Over Wire Rope”, J. Indus. Text., v. 32, no. 1, 2002, pp. 67 -75. [3 ] F. Sloan, “Synthetics: The Future for Offshore Platform Moorings,” Sea Technology, April 1999, pp. 49 -53. [4 ] I. Corbetta and F. Sloan, “HMPE Mooring Line Trial for Scarabeo III,” OTC 13272, May 2001. [5] Riewald, P.G., "Performance Analysis of an Aramid Mooring Line", OTC 5187, 1986 Offshore Technology Conference Proc., Houston, pp 305-316, 1986. [6] Koralek, A. and J.K. Barden, "Performance of a Lightweight Aramid Mooring Line", OTC 5381, Offshore Technology Conference Proc., Houston, May 1981, pp 221-231, 1987. [7] Atsushi Horigome, Gen Endo, "Investigation of Repetitive Bending Durability of Synthetic Fiber Ropes", IEEE Robotics and Automation Letters, vol.3, no.3, 2018. [8] Leech, C. (2002) The modelling of friction in polymer fibre ropes. International Journal of Mechanical Sciences, 621‐642 [9 ] John F. Flory, ” Mechanics of a Bent Rope”, Global Oceans Singapore - U.S. Gulf Coast, 2020. [10 ] Davies P, Reaud Y, Dussud L, Woerther P, “Mechanical behaviour of HMPE and aramid fibre ropes for deep sea handling operations”. Ocean Engineering 38, 2208‐2214, 2011. [11 ] Davies P, Lacotte N et al, “Durability of Fibre ropes for deep sea handling operations”, Proc OMAE 2013‐ 11332, 2013. [12] F. Sloan, S. Bull, R. Longerich , “Design modifications to increase fatigue life of fiber ropes”, Proceedings of OCEANS 2005 MTS/IEEE, 2005. [13] Nabijou S, Hobbs RE, (1995) “Frictional performance of wire and fibre ropes bent over sheaves”, Journal of strain analysis for engineering design, vol. 30, 1, pp. 45‐57 [14 ] Thomas R, Gilmore J, “Deepwater synthetic lowering and lifting lines with enhanced cyclic bend fatigue resistance”, (2009), Proc. DOT, New Orleans [15] P. Utvik, "Lifetime of Ropes over Sheaves," internal report, PGS Exploration AS, Lysaker, Norway, 1999. [16] M. Meuwissen, D. Glasbergen, M. Kösters , R. Bosman, P. Smeets, and H. Schneiders, “On the origin of lifetime extension for HMPE ropes in bending operations,” San Diego, Oceans MTS/IEEE, 2013. [17 ] P. Gibson, “Bending Fatigue Tests on HBL Rope”, contract report, Tension Member Technology, Huntington Beach, CA, May 1977. [18 ] Ridge, I.M.L., Chaplin, C.R. & Zheng, J. “Effect of degradation and impaired quality on wire rope bending over sheave fatigue endurance.” Engineering Failure Analysis 8 (2001): 173 - 187. [19] F. Sloan, R. Nye, and T. Liggett, "Improving Bend-over-Sheave Fatigue in Fiber Ropes," Oceans 2003, Marine Technology Society, pp. 1234-1237, Sept. 2003. [20 ] Davies Peter, Francois M., Lacotte Nicolas, Vu Thanh Do, Durville Damien, “An empirical model to predict the lifetime of braided HMPE handling ropes under cyclic bend over sheave (CBOS) loading”, Ocean Engineering, Volume 97, Pages 74-81, 2015. [21] J. L. Cooper and H. Sakai, “Aramid Fiber Kevlar and its applications,” (in Japanese) Sen’i Gakkaishi, vol. 43, no. 4, 1987, pp. 125 – 129. [22 ] J. H. Van Leeuwen and A. J. Van der Burg, “Bending Fatigue Behavior of Twaron Aramid Ropes,” Proc.0 Oceans ’90, Marine Techn. Soc., pp. 670 -676, 1990. [23] Juliano Picanço Duartea, Carlos Eduardo Marcos Guilherme, Antonio Henrique, Adriano Câmara Mendonça, Felipe Stumpf “Lifetime prediction of aramid yarns applied to offshore mooring due to purely hydrolytic degradation”, 2018. [24] Davies, P., Reaud, Y., Dussud, L. & Woerther, P. “Mechanical behavior of HMPE and aramid fibre ropes for deepsea handling operations.” Ocean Engineering 38(17 -18) (2011): 2208-2214.