PSI - Issue 38

Available online at www.sciencedirect.com Available online at www.sciencedirect.com ScienceDirect Structural Integrity Procedia 00 (2021) 000 – 000

www.elsevier.com/locate/procedia

ScienceDirect

Procedia Structural Integrity 38 (2022) 271–282

© 2021 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0) Peer-review under responsibility of the scientific committee of the Fatigue Design 2021 Organizers Abstract Fatigue crack growth life assessment enables manufacturers to quantify damage tolerance capability of high-risk components. Reduced order models that are based on simple geometries (i.e. surface crack in a plate, corner crack at a bolt hole) and on the assumption that cracks maintain an elliptical shape during propagation, are commonly employed in the damage assessment. A more comprehensive modeling process should consider the component geometry, service loading conditions and, eliminate assumptions related to crack front shape or planarity of the crack growth path. A 3D finite element-based approach is evaluated in this study as a more accurate alternative to reduced order models. For verification purposes, an analytical solution-based model was developed and implemented in MATLAB to predict fatigue crack growth life and crack front evolution for three different crack types: surface, corner and internal. The analytical model solutions are compared against 3D finite element (FE) based approach implemented in SimModeler Crack. The 3D FE modelling approach has been further tested and validated against experimental fatigue crack growth measurements from two Al 2024-T3 specimens containing multiple cracks. The verification and validation data presented herein show that the 3D FE-based modelling approach provides an accurate and effective modelling tool for crack propagation life assessment of structural components. © 2021 The Authors. Published by ELSEVIER B.V. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0) Peer-review under responsibility of the scientific committee of the Fatigue Design 2021 Organizers Keywords: fatigue; crack growth; three dimensional, finite element; s. This is FATIGUE DESIGN 2021, 9th Edition of the International Conference on Fatigue Design Assessment of fatigue crack growth based on 3D finite element modeling approach Paul Catalin Ilie a , Ayhan Ince a *, Adrian Loghin b a Department of Mechanical, Industrial & Aerospace Engineering, Concordia University, Montreal, Quebec, Canada b Simmetrix Inc., Clifton Park, NY, USA i a a b

* Corresponding author. Tel.: + 1 (514) 848 2424 E-mail address: ayhan.ince@concordia.ca

2452-3216 © 2021 The Authors. Published by ELSEVIER B.V. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0) Peer-review under responsibility of the scientific committee of the Fatigue Design 2021 Organizers

2452-3216 © 2021 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0) Peer-review under responsibility of the scientific committee of the Fatigue Design 2021 Organizers 10.1016/j.prostr.2022.03.028