PSI - Issue 38

D. Rigon et al. / Procedia Structural Integrity 38 (2022) 70–76 D. Rigon and G. Meneghetti / Structural Integrity Procedia 00 (2021) 000 – 000

76

7

Masuo H, Tanaka Y, Morokoshi S, et al (2018) Influence of defects, surface roughness and HIP on the fatigue strength of Ti-6Al-4V manufactured by additive manufacturing. Int J Fatigue 117:163 – 179. https://doi.org/10.1016/j.ijfatigue.2018.07.020 Meneghetti G, Rigon D, Cozzi D, et al (2017) Influence of build orientation on static and axial fatigue properties of maraging steel specimens produced by additive manufacturing. Procedia Struct Integr 7:149 – 157. https://doi.org/10.1016/j.prostr.2017.11.072 Mooney B, Kourousis KI, Raghavendra R (2019) Plastic anisotropy of additively manufactured maraging steel: Influence of the build orientation and heat treatments. Addit Manuf 25:19 – 31. https://doi.org/10.1016/j.addma.2018.10.032 Morettini G, Javad Razavi SM, Zucca G (2019) Effects of build orientation on fatigue behavior of Ti-6Al-4V as-built specimens produced by direct metal laser sintering. Procedia Struct Integr 24:349 – 359. https://doi.org/10.1016/j.prostr.2020.02.032 Murakami Y (2019) Metal fatigue : effects of small defects and nonmetallic inclusions, II edition. Elsevier Murakami Y, Takagi T, Wada K, Matsunaga H (2021) Essential structure of S-N curve: Prediction of fatigue life and fatigue limit of defective materials and nature of scatter. Int J Fatigue 146:106138. https://doi.org/10.1016/j.ijfatigue.2020.106138 Pellizzari M, AlMangour B, Benedetti M, et al (2020) Effects of building direction and defect sensitivity on the fatigue behavior of additively manufactured H13 tool steel. Theor Appl Fract Mech 108:102634. https://doi.org/10.1016/j.tafmec.2020.102634 Qian G, Li Y, Paolino DS, et al (2020) Very-high-cycle fatigue behavior of Ti-6Al-4V manufactured by selective laser melting: Effect of build orientation. Int J Fatigue 136:105628. https://doi.org/10.1016/j.ijfatigue.2020.105628 Razavi SMJ, Van Hooreweder B, Berto F (2020) Effect of build thickness and geometry on quasi-static and fatigue behavior of Ti-6Al-4V produced by Electron Beam Melting. Addit Manuf 36:101426. https://doi.org/10.1016/j.addma.2020.101426 Rigon D, Meneghetti G (2020) An engineering estimation of fatigue thresholds from a microstructural size and Vickers hardness: application to wrought and additively manufactured metals. Int J Fatigue 139:105796. https://doi.org/10.1016/j.ijfatigue.2020.105796 Rigon D, Meneghetti G (2021) Engineering estimation of the fatigue limit of wrought and defective additively manufactured metals for different load ratios. Int J Fatigue Rigon D, Meneghetti G, Görtler M, et al (2018) Influence of defects on axial fatigue strength of maraging steel specimens produced by additive manufacturing. MATEC Web Conf 165:02005. https://doi.org/10.1051/matecconf/201816502005 Romano S, Nezhadfar PD, Shamsaei N, et al (2020) High cycle fatigue behavior and life prediction for additively manufactured 17-4 PH stainless steel: Effect of sub-surface porosity and surface roughness. Theor Appl Fract Mech 106:102477. https://doi.org/10.1016/j.tafmec.2020.102477 Sadananda K, Nani Babu M, Vasudevan AK (2019) The unified approach to subcritical crack growth and fracture. Eng Fract Mech 212:238 – 257. https://doi.org/10.1016/J.ENGFRACMECH.2019.03.010 Solberg K, Berto F (2019) Notch-defect interaction in additively manufactured Inconel 718. Int J Fatigue 122:35 – 45. https://doi.org/10.1016/J.IJFATIGUE.2018.12.021 Wang Z, Palmer TA, Beese AM (2016) Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing. Acta Mater 110:226 – 235. https://doi.org/10.1016/j.actamat.2016.03.019 Wycisk E, Solbach A, Siddique S, et al (2014) Effects of defects in laser additive manufactured Ti-6Al-4V on fatigue properties. Phys Procedia 56:371 – 378. https://doi.org/10.1016/j.phpro.2014.08.120 Xu W, Brandt M, Sun S, et al (2015) Additive manufacturing of strong and ductile Ti-6Al-4V by selective laser melting via in situ martensite decomposition. Acta Mater 85:74 – 84. https://doi.org/10.1016/j.actamat.2014.11.028 Yoder G, Cooley L, Crooker T (1983) A Critical Analysis of Grain-Size and Yield-Strength Dependence of Near-Threshold Fatigue Crack Growth in Steels. In: Fracture Mechanics: Fourteenth Symposium — Volume I: Theory and Analysis. ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, pp I-348-I-348 – 18 Zerbst U, Bruno G, Buffiere J-Y, et al (2021) Damage tolerant design of additively manufactured metallic components subjected to cyclic loading: State of the art and challenges. Prog Mater Sci 100786. https://doi.org/10.1016/j.pmatsci.2021.100786