PSI - Issue 38

Hugo Roirand et al. / Procedia Structural Integrity 38 (2022) 149–158 Author name / Structural Integrity Procedia 00 (2021) 000 – 000

158 10

zones on the high cycle fatigue behaviour of a 316L stainless steel: Analyzed using X-ray computed tomography. Materials Science and Engineering: A 757, 146 – 159. https://doi.org/10.1016/j.msea.2019.04.101 Bertoli, U.S., Wolfer, A.J., Matthews, M.J., Delplanque, J.-P.R., Schoenung, J.M., 2017. On the limitations of Volumetric Energy Density as a design parameter for Selective Laser Melting. Materials and Design 10. Brika, S.E., Letenneur, M., Dion, C.A., Brailovski, V., 2020. Influence of particle morphology and size distribution on the powder flowability and laser powder bed fusion manufacturability of Ti-6Al-4V alloy. Additive Manufacturing 31, 100929. https://doi.org/10.1016/j.addma.2019.100929 Castelluccio, G.M., Musinski, W.D., McDowell, D.L., 2014. Recent developments in assessing microstructure-sensitive early stage fatigue of polycrystals. Current Opinion in Solid State and Materials Science 18, 180 – 187. https://doi.org/10.1016/j.cossms.2014.03.001 Colombié, M., 1991. Aciers inoxydables. a v 67. Cruz, V., Chao, Q., Birbilis, N., Fabijanic, D., Hodgson, P.D., Thomas, S., 2020. Electrochemical studies on the effect of residual stress on the corrosion of 316L manufactured by selective laser melting. Corrosion Science 164, 108314. https://doi.org/10.1016/j.corsci.2019.108314 DebRoy, T., Wei, H.L., Zuback, J.S., Mukherjee, T., Elmer, J.W., Milewski, J.O., Beese, A.M., Wilson-Heid, A., De, A., Zhang, W., 2018. Additive manufacturing of metallic components – Process, structure and properties. Progress in Materials Science 92, 112 – 224. https://doi.org/10.1016/j.pmatsci.2017.10.001 Garlea, E., Choo, H., Sluss, C.C., Koehler, M.R., Bridges, R.L., Xiao, X., Ren, Y., Jared, B.H., 2019. Variation of elastic mechanical properties with texture, porosity, and defect characteristics in laser powder bed fusion 316L stainless steel. Materials Science and Engineering: A 763, 138032. https://doi.org/10.1016/j.msea.2019.138032 Guerchais, R., Morel, F., Saintier, N., Robert, C., 2015. Influence of the microstructure and voids on the high-cycle fatigue strength of 316L stainless steel under multiaxial loading: MICROSTRUCTURE AND VOIDS ON THE HCF STRENGTH OF 316L STAINLESS STEEL. Fatigue Fract Engng Mater Struct 38, 1087 – 1104. https://doi.org/10.1111/ffe.12304 Gunenthiram, V., 2018. Compréhension de la formation de porosités en fab rication additive (LBM). Analyse expérimentale de l’interaction laser – lit de poudre – bain liquide. de la thèse. l’École Nationale Supérieure d’Arts et Métiers, PIMM. Khoukhi, D.E., 2021. Probabilistic modeling of the size effect and scatter in High Cycle Fatigue using a Monte-Carlo approach: Role of the defect population in cast aluminum alloys. International Journal of Fatigue 21. Laverne, F., Segonds, F., Dubois, P., 2016. Fabrication additive - Principes généraux. ADDITIVE MANUFACTURING 19. Li, Z., Voisin, T., McKeown, J.T., Ye, J., Braun, T., Kamath, C., King, W.E., Wang, Y.M., 2019. Tensile properties, strain rate sensitivity, and activation volume of additively manufactured 316L stainless steels. International Journal of Plasticity 120, 395 – 410. https://doi.org/10.1016/j.ijplas.2019.05.009 Liang, X., Robert, C., Hor, A., Morel, F., 2020. A numerical investigation of the high cycle fatigue sensitivity to microstructure and defect. International Journal of Fatigue 136, 105541. https://doi.org/10.1016/j.ijfatigue.2020.105541 Liverani, E., Toschi, S., Ceschini, L., Fortunato, A., 2017. Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel. Journal of Materials Processing Technology 249, 255 – 263. https://doi.org/10.1016/j.jmatprotec.2017.05.042 Mazzucato, F., Aversa, A., Doglione, R., Biamino, S., Valente, A., Lombardi, M., 2019. Influence of Process Parameters and Deposition Strategy on Laser Metal Deposition of 316L Powder. Metals 9, 1160. https://doi.org/10.3390/met9111160 McDowell, D.L., Dunne, F.P.E., 2010. Microstructure-sensitive computational modeling of fatigue crack formation. International Journal of Fatigue 32, 1521 – 1542. https://doi.org/10.1016/j.ijfatigue.2010.01.003 Mercelis, P., Kruth, J., 2006. Residual stresses in selective laser sintering and selective laser melting. Rapid Prototyping Journal 12, 254 – 265. https://doi.org/10.1108/13552540610707013 Morel, F., Guerchais, R., Saintier, N., 2015. Competition between microstructure and defect in multiaxial high cycle fatigue. Frattura ed Integrità Strutturale 9, 404 – 414. https://doi.org/10.3221/IGF-ESIS.33.45 Pineau, A., McDowell, D.L., Busso, E.P., Antolovich, S.D., 2016. Failure of metals II: Fatigue. Acta Materialia 107, 484 – 507. https://doi.org/10.1016/j.actamat.2015.05.050 Ronneberg, T., Davies, C.M., Hooper, P.A., 2020. Revealing relationships between porosity, microstructure and mechanical properties of laser powder bed fusion 316L stainless steel through heat treatment. Materials & Design 189, 108481. https://doi.org/10.1016/j.matdes.2020.108481 Salman, O.O., Brenne, F., Niendorf, T., Eckert, J., Prashanth, K.G., He, T., Scudino, S., 2019. Impact of the scanning strategy on the mechanical behavior of 316L steel synthesized by selective laser melting. Journal of Manufacturing Processes 45, 255 – 261. https://doi.org/10.1016/j.jmapro.2019.07.010 Schijve, J., 2009. Fatigue of structures and materials, Second edition. ed. Springer, Dordrecht. Sun, S., Brandt, M., Easton, M., 2017. 2 - Powder bed fusion processes: An overview, in: Brandt, Milan (Ed.), Laser Additive Manufacturing, Woodhead Publishing Series in Electronic and Optical Materials. Woodhead Publishing, pp. 55 – 77. https://doi.org/10.1016/B978-0 08-100433-3.00002-6 Sun, S.-H., Ishimoto, T., Hagihara, K., Tsutsumi, Y., Hanawa, T., Nakano, T., 2019. Excellent mechanical and corrosion properties of austenitic stainless steel with a unique crystallographic lamellar microstructure via selective laser melting. Scripta Materialia 159, 89 – 93. https://doi.org/10.1016/j.scriptamat.2018.09.017 Sun, Z., Tan, X., Tor, S.B., Chua, C.K., 2018. Simultaneously enhanced strength and ductility for 3D-printed stainless steel 316L by selective laser melting. NPG Asia Mater 10, 127 – 136. https://doi.org/10.1038/s41427-018-0018-5 Tucho, W.M., Lysne, V.H., Austbø, H., Sjolyst-Kverneland, A., Hansen, V., 2018. Investigation of effects of process parameters on microstructure and hardness of SLM manufactured SS316L. Journal of Alloys and Compounds 740, 910 – 925. https://doi.org/10.1016/j.jallcom.2018.01.098 Vayssette, B., 2019. Thèse de doctorat, I2M - ENSAM, Bordeaux