PSI - Issue 37

Dimitris Georgoulis et al. / Procedia Structural Integrity 37 (2022) 941–947 Georgoulis et al. / Structural Integrity Procedia 00 (2021) 000 – 000

947

7

References

Abd El-Aty, A., Xu, Y., Guo, X., Zhang, S.-H., Yan, M., Chen, D., 2018. Strengthening mechanisms, deformation behavior, and anisotropic mechanical properties of Al-Li alloys: A review. Journal of Advanced Research.10, 49 – 67. Araullo-Peters, V., Gault, B., Geuser, F., Deschamps, A., Cairney, J.M., 2014. Microstructural evolution during ageing of Al – Cu – Li – x alloys. Acta Materialia 66, 199 – 208. Blanc, C, Lavelle, B, Mankowski, G., 1997. The role of precipitates enriched with copper on the susceptibility to pitting corrosion of the 2024 aluminium alloy. Corrosion Science 39, 495 – 510. Blankenship, C.P., Starke, E.A., 1992. Improved toughness in Al – Li – Cu – Mg – Ag – Zr alloy X2095. Scripta Metallurgica et Materialia 26,1719 1722. Campestrini, P., VanWesting, E.P.M., DeWit, J.H.W. 2001. Influence of surface preparation on performance of chromate conversion coatings on Alclad 2024 aluminium alloy – Part II: EIS investigation. Electrochimica Acta 46, 2631 – 2647. Deschamps, A., De Geuser, F., Decreus, B., et al. 2012. Precipitation in Al-Cu-Li Alloys: from the kinetics of T1 phase precipitation to microstructure development in Friction Stir Welds. 13th International Conference on Aluminium Alloys, 1145 – 1154. de Sousa Araujo, J. V., de Fátima Santos Bugarin, A., Donatus, U., de Souza Carvalho Machado, C., Queiroz, F. M., Terada, M., Astarita A., Costa I., 2019. Thermomechanical treatment and corrosion resistance correlation in the AA2198 Al – Cu – Li alloy. Corrosion Engineering, Science and Technology 54, 575-586. de Sousa Araujo, JV., Donatus, U., Queiroz, FM., et al., 2018. On the severe localized corrosion susceptibility of the AA2198-T851 alloy. Corrosion Science 133,132 – 140. Donatus, U., Terada, M., Ospina, CR., et al., 2018. On the AA2198-T851 alloy microstructure and its correlation with localized corrosion behaviour. Corrosion Science 131, 300 – 309. Dursun, T., Soutis, C., 2014. Recent developments in advanced aircraft aluminium alloys. Materials and Design 56, 862 – 87 Huang, J-L., Li, J-F., Liu, D-Y., et al., 2018. Correlation of intergranular corrosion behaviour with microstructure in Al-Cu-Li alloy. Corrosion Science 139, 215 – 226. Kim, J.-H., Jeun, J.-H., Chun, H.-J., Lee, Y. R., Yoo, J.-T., Yoon, J.-H., Lee, H.-S., 2016. Effect of precipitates on mechanical properties of AA2195. Journal of Alloys and Compounds 669, 187-198. Li, JF., Li, CX., Peng, ZW., et al. 2008. Corrosion mechanism associated with T1 and T2 precipitates of Al-Cu-Li alloys in NaCl solution. Journal of Alloys and Compounds 460, 688 – 693. Li, J., Zhang, Z., Zhang, J., et al. 2003. Review of research on corrosion behavior of Al-Li alloys. Journal of Chinese Society for Corrosion and protection. 23, 319 – 320. Ma, Y., Zhou, X., Liao, Y., Yi, Y., Wu, H., Wang, Z., Huang, W., 2015. Localised corrosion in AA2099-T83 aluminium-lithium alloy: the role of grain orientation. Corrosion Science 107, 41 – 48. Ma, Y., Zhou, X., Huang, W., Liao, Y., Chen, X., Zhang, X., Thompson, G.E., 2015. Crystallographic defects induced localised corrosion in AA2099-T8 aluminium alloy. Corrosion Engineering Science and Technology 50, 420 – 424. Ma Y, Zhou X, Huang W, et al. 2015. Localized corrosion in AA2099- T83 aluminum-lithium alloy: The role of intermetallic particles. Materials Chemistry and Physics 161, 201 – 210. Moreto, J.A., Gamboni, O.C., Marino, C.E.B., Filho, W. B., Fernandes, J.C.S., Rocha, L.A., 2012. Corrosion behaviour of Al and Al-Li alloys used as aircraft materials. Corrosion and Protection of Materials 31, 60-64. Moreto, J.A., Marino, C.E.B., Filho, W.W.B., Rocha, L.A., Fernandes, J.C.S., 2014. SVET, SKP and EIS study of the corrosion behaviour of high strength Al and Al – Li alloys used in aircraft fabrication. Corrosion Science 84, 30. Nie, J.F., Muddle, B.C., Polmear, I.J., 1996. The effect of precipitate shape and orientation on dispersion strengthening in high strength aluminium alloys. Materials Science Forum,1257-1262. Prasad, N.E, Gokhale, A.A., Rao, P.R., 2003. Mechanical behaviour of aluminium-lithium alloys. Sadhana 28, 209 – 246. Proton, V., Alexis, J., Andrieu, E., Delfosse, J., Deschamps, A., De Geuser, F., Lafont, M.-C., Blanc, C., 2014. The influence of artificial ageing on the corrosion behaviour of a 2050 aluminium-copper-lithium alloy. Corrosion Science 80, 494 – 502. Rioja, R.J., Liu J., 2012. The evolution of Al-Li base products for aerospace and space applications, Metallurgical and Material Transactions A 43, 3325 – 3337. Schmutz, P., Frankel, G. S., 2006. Characterization of AA2024-T3 by Scanning Kelvin Probe Force Microscopy. Journal of the Electrochemical Society 145, 2285 – 2295. Zhang, X., Zhou, X., Hashimoto, T., Lindsay, J., Ciuca, O., Luo, C., Sun, Z., Zhang, X., Tang, Z., 2016 The influence of grain structure on the corrosion behaviour of 2A97-T3 Al-Cu-Li alloy. Evaluation and. Program Planning. Zou, Y., Chen, X., Chen, B., 2018. Corrosion behavior of 2198 Al – Cu – Li alloy in different aging stages in 3.5 wt % NaCl aqueous solution. Journal of Materials Research 33, 1011 – 1022. Wang, X.H., Wang, J.H., Yue, X., Gao, Y., 2015. Effect of aging treatment on the exfoliation corrosion and stress corrosion cracking behaviors of 2195 Al – Li alloy. Materials and Design 67, 596.