PSI - Issue 37

A. Kostina et al. / Procedia Structural Integrity 37 (2022) 431–438 A.Kostina/ Structural Integrity Procedia 00 (2019) 000 – 000

438

8

Acknowledgements This research was supported by Russian Science Foundation (Grant No. 19-77-30008). References

Shafiei, A., Dusseault, M. B., 2013. Geomechanics of Thermal Viscous Oil Production in Sandstones. Journal of Petroleum Science and Engineering 103, 121 – 139. Mozaffari, S., Nikookar, M., Ehsani, M.R., Sahranavard, L., Roayaie, E., Mohammadi, A.H., 2013. Numerical Modeling of Steam Injection in Heavy Oil Reservoirs. Fuel 112, 185 – 192. Dianatnasab, F., Nikookar, M., Hosseini, S., Sabeti, M., 2016. Study of Reservoir Properties and Operational Parameters Influencing in The Steam Assisted Gravity Drainage Process in Heavy Oil Reservoirs by Numerical Simulation. Petroleum 2, 236-251. Huang, S., Xia, Y., Xiong, H., Liu, H., Chen, X., 2018 A Three-Dimensional Approach to Model Steam Chamber Expansion and Production Performance of SAGD Process. International Journal of Heat and Mass Transfer 127, 29 – 38. Liu, H., Cheng, L., Huang, S., Jia, P., Chen, M., 2018. Evolution Characteristics of SAGD Steam Chamber and its Impacts on Heavy Oil Production and Heat Consumption. International Journal of Heat and Mass Transfer 121, 579 – 59. Zhang, Q., Liu, H., Dong, X., Liu, Y., Li, G., Wang, Y., 2020. A New Comprehensive Model to Estimate the Steam Chamber Expansion and Recovery Performance of Entire SAGD Process. Journal of Petroleum Science and Engineering 185, 106629. Aktan, T., Farouq Ali, S.M., 1978. Finite element analysis of temperature and thermal stresses induced by hot water injection. Society of Petrolium Engineers Journal 18, 457 – 469 Gao, Y., Chen, M., 2020. Numerical Modeling on Thermoelastoplastic Responses of Karamay Oil Sand Reservoir upon Steam Circulation Considering Phase Change of Bitumen. Journal of Petroleum Science and Engineering 187, 106745. Lin, B., Chen, S., Jin Y., 2017. Evaluation of Reservoir Deformation Induced byWater Injection in SAGDWells Considering Formation Anisotropy, Heterogeneity and Thermal Effect. Journal of Petroleum Science and Engineering 157, 767 – 779. Rahmati, E., Nouri, A., Fattahpour, V., Trivedi J., 2017. Numerical Assessment of the Maximum Operating Pressure for SAGD Projects by Considering the Intrinsic Shale Anisotropy. Journal of Petroleum Science and Engineering 148, 10 – 20 Yin, Y., Liu Y., 2015. FEM Analysis of Fluid-Structure Interaction in Thermal Heavy Oil Recovery Operations. Sustainability 7, 4035-4048. Lee, H., Kharangte, C. R., Mascarenhas, N., 2015. Experimental and Computational Investigation of Vertical Downflow Condensat ion. International Journal of Heat and Mass Transfer 85, 865-879. Huang, S., Xia, Y., Xiong, H., Liu, H., Chen, X., 2018. A Three-dimensional Approach to Model Steam Chamber Expansion and Production Performance of SAGD Process. International Journal of Heat and Mass Transfer 127, 29-38.