PSI - Issue 35

Mohammad Reza Khosravani et al. / Procedia Structural Integrity 35 (2022) 59–65 M.R. Khosravani and T. Reinicke / Structural Integrity Procedia 00 (2021) 000–000

65

7

technique is expected in near future. However, further research is required to overcome some available limits and challenges.

Acknowledgements

This work as part of the project “Smart Production Design Center” (SmaP) is funded by the European Regional Development Fund (ERDF) under the program OP EFRE NRW 2014-2020 (EFRE- 0200545).

References

ASTM D638-14, Standard test method for tensile properties of plastics. ASTM International, 2014. ASTM F2792-12 Standard Terminology for Additive Manufacturing Technologies, American Society for Testing Materials, West Conshohocken, USA. 2012. Baux, A., Jacques, S., Allemand, A., Vignoles, G.L., David., P., Piquero, T., Stempin, M., Chollon, G., 2021. Complex geometry macroporous SiC ceramics obtained by 3D-printing, polymer impregnation and pyrolysis (PIP) and chemical vapor deposition (CVD). Journal of the European Ceramic Society 42. Chaco´n, J.M., Caminero, M.A., Garc´ıa-Plaza, E., Nu´nez, P.J., 2017. Additive manufacturing of PLA structures using fused deposition modelling: E ff ect of process parameters on mechanical properties and their optimal selection. Materials & Design 124, 143-157. Deomore S.A., Raykar, S.J., 2021. Multi-criteria decision making paradigm for selection of best printing parameters of fused deposition modeling. Materials Today: Proceedings Khosravani, M.R., Reinicke, T., 2020. 3D-printed sensors: Current progress and future challenges. Sensors and Actuators A: Physical 305, 111916. Khosravani, M.R., Reinicke, T., 2020. E ff ects of raster layup and printing speed on strength of 3D-printed structural components. Procedia Structural Integrity 28, 720-725. Le Duigou, A., Barbe, A., Cuillou, E., Castro, M., 2019. 3D printing of continuous flax fibre reinforced biocomposites for structural applications. Materials & Design 180, 107884. Li, Z., Wang, L., Ma, G., 2020. Mechanical improvement of continuous steel microcable reinforced geopolymer composites for 3D printing subjected to di ff erent loading conditions. Composites Part B 187,107796. Liu, T., Tian, X., Zhang, M., Albiz, D., Li, D., Ziegmann, G., 2018. Interfacial performance and fracture patterns of 3D printed continuous carbon fiber with sizing reinforced PA6 composites. Composites Part A: Applied Science and Manufacturing 114, 368-376. Marchment, T., Sanjayan, J., 2020. Bond properties of reinforcing bar penetrations in 3D concrete printing 120, 103394. Matsuzaki, R., Kanatani, T., Todoroki, A., 2019. Multi-material additive manufacturing of polymers and metals using fusedfilament fabrication and electroforming. Additive Manufacturing 29, 100812. Nadagouda, M., Rastogi, V., Ginn, M., 2020. A review on 3D printing techniques for medical applications. Current Opinion in Chemical Engineer ing 28, 152-157. Nasiri, S., Khosravani, M.R., 2020. Progress and challenges in fabrication of wearable sensors for health monitoring. Sensors and Actuators A: Physical 312, 112105. Nicholas, M.R., 2019. How does the automotive industry benefit from 3D metal printing? Metal Powder Report 74, 257-258. Pei, S., Wang, K., Chen, C., Li, J., Li, Y., Zrng, D., Su, X., Yang, H., 2021. Process-structure-property analysis of short carbon fiber reinforced polymer composite via fused filament fabrication. Journal of Manufacturing Processes 64, 544-556. Polyzos, E., Van Hemelrijck, D., Pyl, L., 2021. Numerical modelling of the elastic properties of 3D-printed specimens of thermoplastic matrix reinforced with continuous fibres. Composites Part B: Engineering 211, 108671. Shahrubudin, N., Lee, T., Ramlan, 2019. An Overview on 3D Printing Technology: Technological, Materials, and Applications. Procedia Manu facturing 35, 1286-1296. Shang, J., Tian, X., Luo, M., Zhu, W., Li, Dichen, Qin, Y., Shan, Z., 2020. Controllable inter-line bonding performance and fracture patterns of continuous fiber reinforced composites by sinusoidal-path 3D printing. Composites Science and Technology 192, 108296. Ueda, M., Kishimoto, S., Yamawaki, M., Matsuzaki, R., Todoroki, A., Hirano, Y., Le Duigou, A., 2020. 3D compaction printing of a continuous carbon fiber reinforced thermoplastic. Composites Part A: Applied Science and Manufacturing 137, 105985. Yadav, D., Chhabra, D., Garg, R.K., Ahlawat, A., Phogat, A., 2020. Optimization of FDM 3D printing process parameters for multi-material using artificial neural network. Materials Today: Proceedings 21, 1538-1591. Young, D., Wetmore, N., Czabaj, M., 2018. Interlayer fracture toughness of additively manufactured unreinforced and carbon-fiber-reinforced acrylonitrile butadiene styrene. Additive Manufacturing 22, 883-890. Zhang, H., Wu, Y., Wang, K., Peng, Y., Wang, D., Yao, S., Wang, J., 2020. Materials selection of 3D-printed continuous carbon fiber reinforced composites considering multiple criteria. Materials & Design 196, 109140.