PSI - Issue 33

Rizki Dwi Ardika et al. / Procedia Structural Integrity 33 (2021) 171–180 Author name / Structural Integrity Procedia 00 (2019) 000–000

180 10

Sathish, T., Kumar, S. D., Muthukumar, K., & Karthick, S. (2020). Natural inspiration technique for the parameter optimization of A-GTAW welding of naval steel. Materials Today: Proceedings , 21 , 843–846. Seong-Jong, K. I. M., Seok-Ki, J., Min-Su, H. A. N., & Jae-Cheul, P. (2013). Jae-Yong JEONG, Sang-Ok CHONG, Mechanical and electrochemical characteristics in sea water of 5052-O aluminum alloy for ship. Trans. Nonferrous Met. Soc. China. , 23 , 636–641. Sravanthi, S. S., Acharyya, S. G., & Chapala, P. (2019). Effect of GMAW-brazing and Cold Metal Transfer Welding Techniques on the corrosion behaviour of Aluminium-Steel lap joints. Materials Today: Proceedings , 18 , 2708–2716. Subbaiah, K., Geetha, M., Shanmugarajan, B., & Rao, S. R. K. (2012). Comparative evaluation of tungsten inert gas and laser beam welding of AA5083-H321. Sadhana , 37 (5), 587–593. Tjaronge, M. W., Sampebulu, V., & Djamaluddin, R. (2015). Porosity and Microstructure Phase of Self Compacting Concrete Using Sea Water as Mixing Water and Curing . 1119 , 647–651. https://doi.org/10.4028/www.scientific.net/AMR.1119.647 Toda, H., Masuda, S., Batres, R., Kobayashi, M., Aoyama, S., Onodera, M., Furusawa, R., Uesugi, K., Takeuchi, A., & Suzuki, Y. (2011). Statistical assessment of fatigue crack initiation from sub-surface hydrogen micropores in high-quality die-cast aluminum. Acta Materialia , 59 (12), 4990–4998. https://doi.org/10.1016/j.actamat.2011.04.049 Vishnyakov, V. I., Kiro, S. A., Oprya, M. V, & Ennan, A. A. (2018). Effect of shielding gas temperature on the welding fume particle formation: Theoretical model. Journal of Aerosol Science , 124 , 112–121. Wang, L., Chen, J., Wu, C., & Luan, S. (2020). Numerical analysis of arc and droplet behaviors in gas metal arc welding with external compound magnetic field. Journal of Materials Processing Technology , 282 , 116638. https://doi.org/https://doi.org/10.1016/j.jmatprotec.2020.116638 Wu, S. C., Yu, C., Zhang, W. H., Fu, Y. N., Helfen, L., & Helfen, L. (2015). Porosity induced fatigue damage of laser welded 7075-T6 joints investigated via synchrotron X-ray microtomography. Science and Technology of Welding and Joining , 20 (1), 11–19. https://doi.org/10.1179/1362171814Y.0000000249 Wu, S., Hu, Y., Song, Z., Ding, S., & Fu, Y. (2019). Fatigue behaviors of laser hybrid welded AA7020 due to defects via synchrotron X‐ray microtomography. Fatigue & Fracture of Engineering Materials & Structures , 42 (10), 2232–2246. Yang, K. V, Rometsch, P., Jarvis, T., Rao, J., Cao, S., Davies, C., & Wu, X. (2018). Porosity formation mechanisms and fatigue response in Al-Si Mg alloys made by selective laser melting. Materials Science and Engineering: A , 712 , 166–174. Yu, H., Xu, Y., Song, J., Pu, J., Zhao, X., & Yao, G. (2015). On-line monitor of hydrogen porosity based on arc spectral information in Al–Mg alloy pulsed gas tungsten arc welding. Optics & Laser Technology , 70 , 30–38. Yu, J., & Kim, D. (2018). Effects of welding current and torch position parameters on minimizing the weld porosity of zinc-coated steel. International Journal of Advanced Manufacturing Technology , 95 (1–4), 551–567. https://doi.org/10.1007/s00170-017-1180-6 Zhan, X., Zhao, Y., Liu, Z., Gao, Q., & Bu, H. (2018). Microstructure and porosity characteristics of 5A06 aluminum alloy joints using laser-MIG hybrid welding. Journal of Manufacturing Processes , 35 (September), 437–445. https://doi.org/10.1016/j.jmapro.2018.08.011 Zhang, B., Cockcroft, S. L., Maijer, D. M., Zhu, J. D., & Phillion, A. B. (2005). Casting defects in low-pressure die-cast aluminum alloy wheels. Jom , 57 (11), 36–43. https://doi.org/10.1007/s11837-005-0025-1 Zhang, C., Gao, M., & Zeng, X. (2016). Journal of Materials Processing Technology Effect of microstructural characteristics on high cycle fatigue properties of laser-arc hybrid welded AA6082 aluminum alloy. Journal of Materials Processing Tech. , 231 , 479–487. https://doi.org/10.1016/j.jmatprotec.2016.01.019 Zhao, Y., Zhou, X., Liu, T., Kang, Y., & Zhan, X. (2020). Investigate on the porosity morphology and formation mechanism in laser-MIG hybrid welded joint for 5A06 aluminum alloy with Y-shaped groove. Journal of Manufacturing Processes , 57 (July), 847–856. https://doi.org/10.1016/j.jmapro.2020.07.044 Zheng, W., He, Y., Yang, J., & Gao, Z. (2018). Hydrogen diffusion mechanism of the single-pass welded joint in welding considering the phase transformation effect. Journal of Manufacturing Processes , 36 (October), 126–137. https://doi.org/10.1016/j.jmapro.2018.09.026 Zhu, Chenxiao, Tang, X., He, Y., Lu, F., & Cui, H. (2017). Study on arc characteristics and their influences on weld bead geometry in narrow gap GMAW of 5083 Al-alloy. The International Journal of Advanced Manufacturing Technology , 90 (9–12), 2513–2525. Zhu, Congcong, Sun, L., Gao, W., Li, G., & Cui, J. (2019). The effect of temperature on microstructure and mechanical properties of Al/Mg lap joints manufactured by magnetic pulse welding. Journal of Materials Research and Technology , 8 (3), 3270–3280. https://doi.org/10.1016/j.jmrt.2019.05.017